[Fri Jun 22 10:46:27 2012] Detection parameters:
  Position = (254.7, 238.6) = 6 13 47.88 47 38 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.4 +/- 14.1
  Background counts = 53.7
  Rate = 0.005 +/- 0.0006

[Fri Jun 22 10:46:28 2012] Off-axis axis estimate = 5.37'
[Fri Jun 22 11:21:57 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:21:57 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Fri Jun 22 11:21:57 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.928
[Fri Jun 22 11:21:57 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.11"
[Fri Jun 22 11:35:33 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 22 11:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src5.csv
[Fri Jun 22 11:35:33 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 22 11:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src5.csv
[Fri Jun 22 11:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 11:35:33 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 22 11:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun 22 11:35:33 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 22 11:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun 22 11:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 11:35:42 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.192394 pixels away
[Fri Jun 22 11:35:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 11:35:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 11:35:42 2012] Assessing source extent using major
[Fri Jun 22 11:35:42 2012] Source does appear to be extended
[Fri Jun 22 11:35:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 12:11:11 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 12:11:11 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Fri Jun 22 12:11:11 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.928
[Fri Jun 22 12:11:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.11"
[Fri Jun 22 12:23:54 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 22 12:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src5.csv
[Fri Jun 22 12:23:54 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 22 12:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src5.csv
[Fri Jun 22 12:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 12:23:54 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 22 12:23:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 22 12:23:54 2012] fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 22 12:23:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 22 12:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 12:24:03 2012] Source 4 is offset by 1.114157 and -7.000339 pixels which is larger than
2 X fitted extent = 1.302667 x 1.302667, not incorporating fit results
[Fri Jun 22 12:24:03 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 12:24:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 12:24:03 2012] Assessing source extent using major
[Fri Jun 22 12:24:03 2012] Source does appear to be extended
[Fri Jun 22 12:24:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 13:25:31 2012] XMMSAS src. selection expression = ellipse(22111.400681, 20712.136520, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 13:25:31 2012] Writing source region out to fullrun_mos2_xmm0502640201_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 22 13:25:31 2012] Extracting stamp from image fullrun_mos2_xmm0502640201_pi300-10000_cl_sm2.00.img.gz, (217, 201) - (292, 276)
[Fri Jun 22 13:25:31 2012] XMMSAS bgd. selection expression = annulus(22111.400681, 20712.136520, 1087.500000, 2175.000000, X, Y)
[Fri Jun 22 13:25:31 2012] Writing fullrun_mos2_xmm0502640201_pi300-10000_pass1_cl_src4.gif
[Fri Jun 22 13:30:15 2012] Mean detx,y = (4491.81, -7227.81) 
[Fri Jun 22 13:30:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 13:30:54 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 13:30:54 2012] Setting source spectrum file to fullrun_mos2_xmm0502640201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 13:30:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502640201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 22 13:39:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 13:39:51 2012] rmf not generated due to insufficient counts
[Fri Jun 22 13:41:20 2012] Updating aperture counts using extracted products
[Fri Jun 22 13:41:20 2012] Error reading totcts from fullrun_mos2_xmm0502640201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 13:41:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 13:41:20 2012] Using photon index=1.80, rate=0.0047, arf fullrun_mos2_xmm0502640201_pi300-10000_pass1_cl_src4.arf
[Fri Jun 22 13:41:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 13:41:20 2012] Updating source flux to 7.1e-14
[Fri Jun 22 13:41:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting