[Fri Jun 22 10:46:06 2012] Detection parameters:
  Position = (313.8, 315.1) = 6 13 22.45 47 44 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9024.0 +/- 114.3
  Background counts = 71.5
  Rate = 0.2 +/- 0.003

[Fri Jun 22 10:46:07 2012] Off-axis axis estimate = 1.64'
[Fri Jun 22 11:13:19 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:13:19 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Jun 22 11:13:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Fri Jun 22 11:13:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri Jun 22 11:21:56 2012] fullrun_mos1_xmm0502640201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 22 11:21:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502640201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 11:21:56 2012] fullrun_mos1_xmm0502640201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 22 11:21:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502640201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 11:21:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502640201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502640201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 11:21:56 2012] fullrun_mos1_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 22 11:21:56 2012] fullrun_mos1_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 22 11:21:57 2012] Fit fullrun_mos1_xmm0502640201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 22 11:35:40 2012] Spatial fit model total counts = 7307.010000, observed total counts = 7307.000000
[Fri Jun 22 11:35:40 2012] Offset between fit and detection position for source 1 = 0.150925 pixels
[Fri Jun 22 11:35:40 2012] 7305.140000 total counts/ 1722.300000 bgd. counts: snr = 134.524312
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.150925 pixels
  Position = (313.6, 315.2) = 6 13 22.51 47 44 26.5
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 5582.8 +/- 85.5
  Background counts = 1722.3
  Rate = 0.2 +/- 0.002
[Fri Jun 22 11:35:40 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 11:35:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 11:35:40 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 11:35:40 2012] Source does appear to be extended
[Fri Jun 22 11:35:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 11:58:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 11:58:12 2012] Initial guess for spatial extent in simple fitting = 5.25"
[Fri Jun 22 11:58:12 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.773
[Fri Jun 22 11:58:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.25"
[Fri Jun 22 12:11:11 2012] fullrun_mos1_xmm0502640201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 22 12:11:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502640201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 12:11:11 2012] fullrun_mos1_xmm0502640201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 22 12:11:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502640201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 12:11:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502640201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502640201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 12:11:11 2012] fullrun_mos1_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 22 12:11:11 2012] fullrun_mos1_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 22 12:11:11 2012] Fit fullrun_mos1_xmm0502640201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 22 12:24:02 2012] Spatial fit model total counts = 7287.000000, observed total counts = 7287.000000
[Fri Jun 22 12:24:02 2012] Offset between fit and detection position for source 1 = 0.012800 pixels
[Fri Jun 22 12:24:02 2012] 7314.460000 total counts/ 1757.280000 bgd. counts: snr = 132.566558
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012800 pixels
  Position = (313.6, 315.2) = 6 13 22.52 47 44 26.5
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 5557.2 +/- 85.5
  Background counts = 1757.3
  Rate = 0.2 +/- 0.002
[Fri Jun 22 12:24:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 12:24:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 12:24:02 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 12:24:02 2012] Source does appear to be extended
[Fri Jun 22 12:24:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 13:17:42 2012] Counts = 5557.180000, rescaling region sizes by 2.000000
[Fri Jun 22 13:17:42 2012] XMMSAS src. selection expression = ellipse(27235.859000, 27375.188000, 625.479618, 625.479618, 0.000000, X, Y)
[Fri Jun 22 13:17:42 2012] Writing source region out to fullrun_mos1_xmm0502640201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 22 13:17:42 2012] Extracting stamp from image fullrun_mos1_xmm0502640201_pi300-10000_cl_sm2.00.img.gz, (278, 279) - (350, 351)
[Fri Jun 22 13:17:42 2012] XMMSAS bgd. selection expression = annulus(27235.859000, 27375.188000, 2084.932060, 4169.864120, X, Y)
[Fri Jun 22 13:17:42 2012] Writing fullrun_mos1_xmm0502640201_pi300-10000_pass1_cl_src1.gif
[Fri Jun 22 13:17:47 2012] Mean detx,y = (160.10, -177.78) 
[Fri Jun 22 13:17:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 13:18:17 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 13:18:18 2012] Setting source spectrum file to fullrun_mos1_xmm0502640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 13:18:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502640201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 22 13:41:20 2012] Updating aperture counts using extracted products
[Fri Jun 22 13:41:20 2012] Error reading totcts from fullrun_mos1_xmm0502640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 13:41:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 13:41:20 2012] Using photon index=1.80, rate=0.161, arf fullrun_mos1_xmm0502640201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 13:41:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 13:41:20 2012] Updating source flux to 1.6e-12
[Fri Jun 22 13:41:35 2012] Reading fit data from xmm0502640201/analysis//spectral/fullrun_mos1_xmm0502640201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 22 13:41:35 2012] Spectral fit parameter nH value = 7.87214e+20
[Fri Jun 22 13:41:35 2012] Spectral fit parameter PhoIndex value = 1.82554
[Fri Jun 22 13:41:35 2012] Failed to get F(0.3-8.0) from xmm0502640201/analysis//spectral/fullrun_mos1_xmm0502640201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 22 13:41:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 13:41:35 2012] Using Nh = 7.9e+20, photon index=1.83, rate=0.161, arf fullrun_mos1_xmm0502640201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 13:41:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 13:41:35 2012] Updating source flux to 1.7e-12