[Mon Apr 30 11:31:16 2012] Detection parameters:
  Position = (230.1, 293.8) = 8 55 12.24 20 4 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.4 +/- 15.3
  Background counts = 39.7
  Rate = 0.003 +/- 0.0004

[Mon Apr 30 11:31:16 2012] Off-axis axis estimate = 4.97'
[Mon Apr 30 15:06:13 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 15:06:13 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Mon Apr 30 15:06:13 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.924
[Mon Apr 30 15:06:13 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.91"
[Mon Apr 30 16:00:22 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src10.ximg exists
[Mon Apr 30 16:00:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src10.csv
[Mon Apr 30 16:00:22 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Apr 30 16:00:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src10.csv
[Mon Apr 30 16:00:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 16:00:22 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Apr 30 16:00:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Apr 30 16:00:22 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Apr 30 16:00:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Apr 30 16:00:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 16:00:49 2012] Spatial fit model total counts = -872.877000, observed total counts = 311.000000
[Mon Apr 30 16:00:49 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 16:00:49 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 16:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 16:00:49 2012] Assessing source extent using major
[Mon Apr 30 16:00:49 2012] Source does appear to be extended
[Mon Apr 30 16:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 19:33:34 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 19:33:34 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Mon Apr 30 19:33:34 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.924
[Mon Apr 30 19:33:34 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.91"
[Mon Apr 30 20:17:08 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src10.ximg exists
[Mon Apr 30 20:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src10.csv
[Mon Apr 30 20:17:08 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Apr 30 20:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src10.csv
[Mon Apr 30 20:17:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 20:17:09 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Apr 30 20:17:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Apr 30 20:17:09 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Apr 30 20:17:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Apr 30 20:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 20:17:31 2012] Spatial fit model total counts = -363.522000, observed total counts = 311.000000
[Mon Apr 30 20:17:31 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 20:17:31 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 20:17:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 20:17:31 2012] Assessing source extent using major
[Mon Apr 30 20:17:31 2012] Source does appear to be extended
[Mon Apr 30 20:17:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 23:07:16 2012] XMMSAS src. selection expression = ellipse(19968.987183, 25512.425507, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Apr 30 23:07:16 2012] Writing source region out to fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src18_src.reg
[Mon Apr 30 23:07:16 2012] Extracting stamp from image fullrun_mos2_xmm0502630201_pi300-10000_cl_sm2.00.img.gz, (193, 256) - (268, 331)
[Mon Apr 30 23:07:16 2012] XMMSAS bgd. selection expression = annulus(19968.987183, 25512.425507, 1087.500000, 2175.000000, X, Y)
[Mon Apr 30 23:07:16 2012] Writing fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src18.gif
[Mon Apr 30 23:15:33 2012] Mean detx,y = (7129.77, -386.14) 
[Mon Apr 30 23:15:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 23:15:47 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 23:15:48 2012] Setting source spectrum file to fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Apr 30 23:15:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Apr 30 23:26:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 23:26:38 2012] rmf not generated due to insufficient counts
[Mon Apr 30 23:30:19 2012] Updating aperture counts using extracted products
[Mon Apr 30 23:30:19 2012] Error reading totcts from fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Apr 30 23:30:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 23:30:21 2012] Using photon index=1.80, rate=0.00346, arf fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src18.arf
[Mon Apr 30 23:30:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 23:30:21 2012] Updating source flux to 5.8e-14
[Mon Apr 30 23:32:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting