[Mon Apr 30 11:31:15 2012] Detection parameters:
  Position = (305.7, 320.2) = 8 54 48.90 20 6 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15377.3 +/- 146.4
  Background counts = 48.7
  Rate = 0.3 +/- 0.003

[Mon Apr 30 11:31:16 2012] Off-axis axis estimate = 1.66'
[Mon Apr 30 15:06:13 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 15:06:13 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Apr 30 15:06:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Mon Apr 30 15:06:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon Apr 30 16:00:22 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Apr 30 16:00:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src1.csv
[Mon Apr 30 16:00:22 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Apr 30 16:00:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src1.csv
[Mon Apr 30 16:00:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 16:00:22 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Apr 30 16:00:22 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Apr 30 16:00:22 2012] Fit fullrun_mos2_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Apr 30 16:00:49 2012] Spatial fit model total counts = 14107.500000, observed total counts = 13632.000000
[Mon Apr 30 16:00:49 2012] Offset between fit and detection position for source 1 = 0.192682 pixels
[Mon Apr 30 16:00:49 2012] 14183.710000 total counts/ 3669.010000 bgd. counts: snr = 173.589095
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.192682 pixels
  Position = (305.5, 320.3) = 8 54 48.95 20 6 29.3
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 10514.7 +/- 119.1
  Background counts = 3669.0
  Rate = 0.2 +/- 0.002
[Mon Apr 30 16:00:49 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 16:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 16:00:49 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 16:00:49 2012] Source does appear to be extended
[Mon Apr 30 16:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 19:33:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Apr 30 19:33:34 2012] Initial guess for spatial extent in simple fitting = 5.51"
[Mon Apr 30 19:33:34 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.721
[Mon Apr 30 19:33:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.51"
[Mon Apr 30 20:17:08 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Apr 30 20:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src1.csv
[Mon Apr 30 20:17:08 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Apr 30 20:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src1.csv
[Mon Apr 30 20:17:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 20:17:08 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Apr 30 20:17:08 2012] fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Apr 30 20:17:08 2012] Fit fullrun_mos2_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Apr 30 20:17:31 2012] Spatial fit model total counts = 13965.100000, observed total counts = 13652.000000
[Mon Apr 30 20:17:31 2012] Offset between fit and detection position for source 1 = 0.008893 pixels
[Mon Apr 30 20:17:31 2012] 14072.460000 total counts/ 3590.260000 bgd. counts: snr = 174.940149
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008893 pixels
  Position = (305.5, 320.3) = 8 54 48.95 20 6 29.3
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 10482.2 +/- 118.6
  Background counts = 3590.3
  Rate = 0.2 +/- 0.002
[Mon Apr 30 20:17:31 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 20:17:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 20:17:31 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 20:17:31 2012] Source does appear to be extended
[Mon Apr 30 20:17:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 23:07:16 2012] Counts = 10482.200000, rescaling region sizes by 3.000000
[Mon Apr 30 23:07:16 2012] XMMSAS src. selection expression = ellipse(26531.710200, 27815.549000, 987.676478, 987.676478, 0.000000, X, Y)
[Mon Apr 30 23:07:16 2012] Writing source region out to fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src1_src.reg
[Mon Apr 30 23:07:16 2012] Extracting stamp from image fullrun_mos2_xmm0502630201_pi300-10000_cl_sm2.00.img.gz, (249, 264) - (362, 377)
[Mon Apr 30 23:07:16 2012] XMMSAS bgd. selection expression = annulus(26531.710200, 27815.549000, 4938.382390, 9876.764780, X, Y) && !ellipse(20192.743759, 20631.815247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30365.333191, 37338.711884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33308.329620, 33623.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19968.987183, 25512.425507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24548.768600, 27625.955200, 338.863881, 338.863881, 0.000000, X, Y) && !ellipse(27169.783600, 18823.509200, 320.073609, 320.073609, 0.000000, X, Y) && !ellipse(23714.841780, 35351.780080, 412.550412, 412.550412, 0.000000, X, Y) && !ellipse(36360.292600, 24683.144400, 363.624810, 363.624810, 0.000000, X, Y) && !ellipse(37233.878052, 26884.003021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18070.695663, 32362.241791, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 23:07:16 2012] Writing fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src1.gif
[Mon Apr 30 23:07:27 2012] Mean detx,y = (81.84, 24.77) 
[Mon Apr 30 23:07:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 23:10:33 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 23:10:34 2012] Setting source spectrum file to fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Apr 30 23:10:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Apr 30 23:30:19 2012] Updating aperture counts using extracted products
[Mon Apr 30 23:30:19 2012] Error reading totcts from fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Apr 30 23:30:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 23:30:21 2012] Using photon index=1.80, rate=0.195, arf fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src1.arf
[Mon Apr 30 23:30:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 23:30:21 2012] Updating source flux to 2e-12
[Mon Apr 30 23:32:25 2012] Reading fit data from xmm0502630201/analysis//spectral/fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Apr 30 23:32:25 2012] Spectral fit parameter nH value = 2.55456e+20
[Mon Apr 30 23:32:25 2012] Spectral fit parameter PhoIndex value = 1.74853
[Mon Apr 30 23:32:25 2012] Failed to get F(0.3-8.0) from xmm0502630201/analysis//spectral/fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Apr 30 23:32:25 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 23:32:25 2012] Using Nh = 2.6e+20, photon index=1.75, rate=0.195, arf fullrun_mos2_xmm0502630201_pi300-10000_pass1_cl_src1.arf
[Mon Apr 30 23:32:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 23:32:25 2012] Updating source flux to 2.1e-12