[Mon Apr 30 11:30:34 2012] Detection parameters:
  Position = (229.9, 293.2) = 8 55 12.32 20 4 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.8 +/- 15.3
  Background counts = 50.5
  Rate = 0.004 +/- 0.0005

[Mon Apr 30 11:30:34 2012] Off-axis axis estimate = 4.99'
[Mon Apr 30 14:30:18 2012] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 14:30:18 2012] Initial guess for spatial extent in simple fitting = 8.92"
[Mon Apr 30 14:30:18 2012] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.845
[Mon Apr 30 14:30:18 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.92"
[Mon Apr 30 15:06:12 2012] fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_src6.ximg exists
[Mon Apr 30 15:06:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_src6.csv
[Mon Apr 30 15:06:12 2012] fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Apr 30 15:06:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_src6.csv
[Mon Apr 30 15:06:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 15:06:12 2012] fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Apr 30 15:06:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Apr 30 15:06:12 2012] fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Apr 30 15:06:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Apr 30 15:06:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502630201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 16:00:42 2012] Spatial fit model total counts = -412.986000, observed total counts = 343.000000
[Mon Apr 30 16:00:42 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 16:00:42 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 16:00:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 16:00:42 2012] Assessing source extent using major
[Mon Apr 30 16:00:42 2012] Source does appear to be extended
[Mon Apr 30 16:00:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 18:48:01 2012] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 18:48:01 2012] Initial guess for spatial extent in simple fitting = 8.92"
[Mon Apr 30 18:48:01 2012] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.845
[Mon Apr 30 18:48:01 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.92"
[Mon Apr 30 19:33:34 2012] fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_src6.ximg exists
[Mon Apr 30 19:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_src6.csv
[Mon Apr 30 19:33:34 2012] fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Apr 30 19:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_src6.csv
[Mon Apr 30 19:33:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 19:33:34 2012] fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Apr 30 19:33:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Apr 30 19:33:34 2012] fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Apr 30 19:33:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Apr 30 19:33:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502630201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 20:17:25 2012] Spatial fit model total counts = -184.252000, observed total counts = 343.000000
[Mon Apr 30 20:17:25 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 20:17:25 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 46.377222 pixels away
[Mon Apr 30 20:17:25 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 20:17:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 20:17:25 2012] Assessing source extent using major
[Mon Apr 30 20:17:25 2012] Source does appear to be extended
[Mon Apr 30 20:17:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 22:32:49 2012] XMMSAS src. selection expression = ellipse(19948.648331, 25455.791077, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Apr 30 22:32:50 2012] Writing source region out to fullrun_mos1_xmm0502630201_pi300-10000_pass1_cl_src18_src.reg
[Mon Apr 30 22:32:50 2012] Extracting stamp from image fullrun_mos1_xmm0502630201_pi300-10000_cl_sm2.00.img.gz, (192, 256) - (267, 331)
[Mon Apr 30 22:32:50 2012] XMMSAS bgd. selection expression = annulus(19948.648331, 25455.791077, 1087.500000, 2175.000000, X, Y)
[Mon Apr 30 22:32:50 2012] Writing fullrun_mos1_xmm0502630201_pi300-10000_pass1_cl_src18.gif
[Mon Apr 30 22:37:31 2012] Mean detx,y = (-192.25, -7287.35) 
[Mon Apr 30 22:37:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 22:37:58 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 22:37:58 2012] Setting source spectrum file to fullrun_mos1_xmm0502630201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Apr 30 22:37:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502630201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Apr 30 23:00:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 23:00:43 2012] rmf not generated due to insufficient counts
[Mon Apr 30 23:30:17 2012] Updating aperture counts using extracted products
[Mon Apr 30 23:30:17 2012] Error reading totcts from fullrun_mos1_xmm0502630201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Apr 30 23:30:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 23:30:18 2012] Using photon index=1.80, rate=0.00399, arf fullrun_mos1_xmm0502630201_pi300-10000_pass1_cl_src18.arf
[Mon Apr 30 23:30:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 23:30:18 2012] Updating source flux to 6.7e-14
[Mon Apr 30 23:30:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting