[Tue Mar 27 18:42:02 2012] Detection parameters:
  Position = (279.5, 283.9) = 21 30 32.87 5 2 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.4 +/- 19.2
  Background counts = 22.1
  Rate = 0.01 +/- 0.0008

[Tue Mar 27 18:42:02 2012] Off-axis axis estimate = 1.73'
[Tue Mar 27 19:47:48 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 19:47:48 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Mar 27 19:47:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Tue Mar 27 19:47:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Mar 27 20:17:14 2012] fullrun_mos2_xmm0502510601_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 27 20:17:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502510601_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 20:17:14 2012] fullrun_mos2_xmm0502510601_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 27 20:17:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502510601_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 20:17:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502510601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502510601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 20:17:14 2012] fullrun_mos2_xmm0502510601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 27 20:17:14 2012] fullrun_mos2_xmm0502510601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 27 20:17:14 2012] Fit fullrun_mos2_xmm0502510601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 27 20:17:30 2012] Spatial fit model total counts = 369.984000, observed total counts = 357.000000
[Tue Mar 27 20:17:30 2012] Offset between fit and detection position for source 1 = 0.077339 pixels
[Tue Mar 27 20:17:30 2012] 375.379000 total counts/ 247.832000 bgd. counts: snr = 8.101987
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.077339 pixels
  Position = (279.5, 283.8) = 21 30 32.87 5 2 15.3
  Extent = 4.1 (3.5-5.1)", rotation angle = 0
  Source counts = 127.5 +/- 19.4
  Background counts = 247.8
  Rate = 0.006 +/- 0.0009
[Tue Mar 27 20:17:30 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:17:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:17:30 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 20:17:30 2012] Source does appear to be extended
[Tue Mar 27 20:17:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 21:19:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 21:19:17 2012] Initial guess for spatial extent in simple fitting = 4.14"
[Tue Mar 27 21:19:17 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.066
[Tue Mar 27 21:19:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.14"
[Tue Mar 27 21:44:44 2012] fullrun_mos2_xmm0502510601_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 27 21:44:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502510601_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 21:44:44 2012] fullrun_mos2_xmm0502510601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 27 21:44:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502510601_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 21:44:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502510601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502510601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 21:44:44 2012] fullrun_mos2_xmm0502510601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 27 21:44:44 2012] fullrun_mos2_xmm0502510601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 27 21:44:44 2012] Fit fullrun_mos2_xmm0502510601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 27 21:45:01 2012] Spatial fit model total counts = 363.285000, observed total counts = 354.000000
[Tue Mar 27 21:45:01 2012] Offset between fit and detection position for source 1 = 0.005322 pixels
[Tue Mar 27 21:45:01 2012] 369.230000 total counts/ 240.855000 bgd. counts: snr = 8.271849
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005322 pixels
  Position = (279.5, 283.8) = 21 30 32.87 5 2 15.2
  Extent = 4.2 (3.5-5.2)", rotation angle = 0
  Source counts = 128.4 +/- 19.2
  Background counts = 240.9
  Rate = 0.006 +/- 0.0008
[Tue Mar 27 21:45:01 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 21:45:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 21:45:01 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 21:45:01 2012] Source does appear to be extended
[Tue Mar 27 21:45:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 22:22:34 2012] XMMSAS src. selection expression = ellipse(24266.182200, 24642.516500, 250.688407, 250.688407, 0.000000, X, Y)
[Tue Mar 27 22:22:34 2012] Writing source region out to fullrun_mos2_xmm0502510601_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 27 22:22:34 2012] Extracting stamp from image fullrun_mos2_xmm0502510601_pi300-10000_cl_sm2.00.img.gz, (265, 269) - (294, 298)
[Tue Mar 27 22:22:34 2012] XMMSAS bgd. selection expression = annulus(24266.182200, 24642.516500, 417.814012, 835.628024, X, Y) && !ellipse(25712.418243, 24201.595062, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 22:22:34 2012] Writing fullrun_mos2_xmm0502510601_pi300-10000_pass1_cl_src1.gif
[Tue Mar 27 22:22:39 2012] Mean detx,y = (74.13, 128.30) 
[Tue Mar 27 22:22:41 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 22:22:51 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 22:22:52 2012] Setting source spectrum file to fullrun_mos2_xmm0502510601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 27 22:22:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502510601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 27 22:36:18 2012] Updating aperture counts using extracted products
[Tue Mar 27 22:36:18 2012] Error reading totcts from fullrun_mos2_xmm0502510601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 27 22:36:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 22:36:19 2012] Using photon index=1.80, rate=0.00564, arf fullrun_mos2_xmm0502510601_pi300-10000_pass1_cl_src1.arf
[Tue Mar 27 22:36:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 22:36:19 2012] Updating source flux to 7.8e-14
[Tue Mar 27 22:36:50 2012] Reading fit data from xmm0502510601/analysis//spectral/fullrun_mos2_xmm0502510601_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 27 22:36:50 2012] Spectral fit parameter nH value = 2.48917e+21
[Tue Mar 27 22:36:50 2012] Spectral fit parameter PhoIndex value = 1.91345
[Tue Mar 27 22:36:50 2012] Failed to get F(0.3-8.0) from xmm0502510601/analysis//spectral/fullrun_mos2_xmm0502510601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 27 22:36:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 22:36:50 2012] Using Nh = 2.5e+21, photon index=1.91, rate=0.00564, arf fullrun_mos2_xmm0502510601_pi300-10000_pass1_cl_src1.arf
[Tue Mar 27 22:36:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 22:36:50 2012] Updating source flux to 9.1e-14