[Sat Mar 24 10:45:29 2012] Detection parameters:
  Position = (310.0, 483.1) = 16 9 9.71 26 56 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.2 +/- 21.9
  Background counts = 168.9
  Rate = 0.008 +/- 0.002

[Sat Mar 24 10:45:29 2012] Off-axis axis estimate = 13.41'
[Sat Mar 24 10:52:35 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 10:52:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 24 10:52:35 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Sat Mar 24 10:52:35 2012] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.888
[Sat Mar 24 10:52:35 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 13.13"
[Sat Mar 24 11:26:38 2012] fullrun_pn_xmm0502510401_pi300-10000_cl_pass0_src2.ximg exists
[Sat Mar 24 11:26:38 2012] fullrun_pn_xmm0502510401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Mar 24 11:26:38 2012] Fit fullrun_pn_xmm0502510401_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Mar 24 11:26:38 2012] fullrun_pn_xmm0502510401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Mar 24 11:26:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502510401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Mar 24 11:26:38 2012] fullrun_pn_xmm0502510401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Mar 24 11:26:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502510401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Mar 24 11:26:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502510401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502510401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 11:47:13 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.253399 pixels away
[Sat Mar 24 11:47:13 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 11:47:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 11:47:13 2012] Assessing source extent using major
[Sat Mar 24 11:47:13 2012] Source does appear to be extended
[Sat Mar 24 11:47:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 11:47:13 2012] Source is confused with source 2
[Sat Mar 24 11:47:24 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 11:47:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 24 11:47:24 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Sat Mar 24 11:47:24 2012] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.888
[Sat Mar 24 11:47:24 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.13"
[Sat Mar 24 12:13:35 2012] fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_src2.ximg exists
[Sat Mar 24 12:13:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_src2.csv
[Sat Mar 24 12:13:35 2012] fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Mar 24 12:13:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_src2.csv
[Sat Mar 24 12:13:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:13:36 2012] fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Mar 24 12:13:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Mar 24 12:13:36 2012] fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Mar 24 12:13:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Mar 24 12:13:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502510401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 12:32:23 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.436575 pixels away
[Sat Mar 24 12:32:23 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.450336 pixels away
[Sat Mar 24 12:32:23 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 12:32:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 12:32:23 2012] Assessing source extent using major
[Sat Mar 24 12:32:23 2012] Source does appear to be extended
[Sat Mar 24 12:32:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 12:32:34 2012] XMMSAS src. selection expression = ellipse(26917.891815, 41978.898621, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 24 12:32:34 2012] Writing source region out to fullrun_pn_xmm0502510401_pi300-10000_pass1_cl_src3_src.reg
[Sat Mar 24 12:32:34 2012] Extracting stamp from image fullrun_pn_xmm0502510401_pi300-10000_cl_sm2.00.img.gz, (272, 446) - (347, 521)
[Sat Mar 24 12:32:34 2012] XMMSAS bgd. selection expression = annulus(26917.891815, 41978.898621, 1087.500000, 2175.000000, X, Y) && !ellipse(27450.020752, 41893.977509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28254.168060, 42292.019501, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 24 12:32:34 2012] Writing fullrun_pn_xmm0502510401_pi300-10000_pass1_cl_src3.gif
[Sat Mar 24 12:34:55 2012] Mean detx,y = (-10988.54, 13963.92) 
[Sat Mar 24 12:35:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 12:35:34 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 12:35:35 2012] Setting source spectrum file to fullrun_pn_xmm0502510401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 24 12:35:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502510401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Mar 24 12:39:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 24 12:39:45 2012] rmf not generated due to insufficient counts
[Sat Mar 24 12:46:51 2012] Updating aperture counts using extracted products
[Sat Mar 24 12:46:52 2012] Error reading totcts from fullrun_pn_xmm0502510401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 24 12:46:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 12:46:52 2012] Using photon index=1.80, rate=0.00752, arf fullrun_pn_xmm0502510401_pi300-10000_pass1_cl_src3.arf
[Sat Mar 24 12:46:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 12:46:52 2012] Updating source flux to 7.2e-14
[Sat Mar 24 12:46:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Mar 24 12:46:57 2012] xmm0502510401/analysis//spectral/fullrun_pn_xmm0502510401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete