[Tue Jun 19 21:44:33 2012] Detection parameters:
  Position = (301.4, 274.9) = 13 26 16.69 31 54 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.2 +/- 26.2
  Background counts = 56.4
  Rate = 0.01 +/- 0.0008

[Tue Jun 19 21:44:33 2012] Off-axis axis estimate = 1.72'
[Tue Jun 19 22:54:33 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 22:54:33 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Jun 19 22:54:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Tue Jun 19 22:54:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Jun 19 23:10:32 2012] fullrun_mos1_xmm0502510301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510301_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 23:10:32 2012] fullrun_mos1_xmm0502510301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 23:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510301_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 23:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 23:10:32 2012] fullrun_mos1_xmm0502510301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 23:10:32 2012] fullrun_mos1_xmm0502510301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 23:10:32 2012] Fit fullrun_mos1_xmm0502510301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 23:27:42 2012] Spatial fit model total counts = 433.000000, observed total counts = 433.000000
[Tue Jun 19 23:27:42 2012] Offset between fit and detection position for source 5 = 0.065343 pixels
[Tue Jun 19 23:27:42 2012] 429.886000 total counts/ 221.367000 bgd. counts: snr = 14.014874
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.065343 pixels
  Position = (301.4, 274.9) = 13 26 16.70 31 54 9.3
  Extent = 4.6 (4.0-5.1)", rotation angle = 0
  Source counts = 208.5 +/- 20.7
  Background counts = 221.4
  Rate = 0.008 +/- 0.0008
[Tue Jun 19 23:27:42 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 23:27:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 23:27:42 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 23:27:42 2012] Source does appear to be extended
[Tue Jun 19 23:27:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 00:26:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 00:26:41 2012] Initial guess for spatial extent in simple fitting = 4.57"
[Wed Jun 20 00:26:41 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.935
[Wed Jun 20 00:26:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.57"
[Wed Jun 20 00:41:05 2012] fullrun_mos1_xmm0502510301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 20 00:41:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 00:41:05 2012] fullrun_mos1_xmm0502510301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 20 00:41:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 00:41:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 00:41:05 2012] fullrun_mos1_xmm0502510301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 20 00:41:05 2012] fullrun_mos1_xmm0502510301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 20 00:41:05 2012] Fit fullrun_mos1_xmm0502510301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 20 01:06:12 2012] Spatial fit model total counts = 433.000000, observed total counts = 433.000000
[Wed Jun 20 01:06:12 2012] Offset between fit and detection position for source 5 = 0.000005 pixels
[Wed Jun 20 01:06:12 2012] 429.886000 total counts/ 221.370000 bgd. counts: snr = 14.014577
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000005 pixels
  Position = (301.4, 274.9) = 13 26 16.70 31 54 9.3
  Extent = 4.6 (4.0-5.1)", rotation angle = 0
  Source counts = 208.5 +/- 20.7
  Background counts = 221.4
  Rate = 0.008 +/- 0.0008
[Wed Jun 20 01:06:12 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 01:06:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 01:06:12 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 01:06:12 2012] Source does appear to be extended
[Wed Jun 20 01:06:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 01:57:15 2012] XMMSAS src. selection expression = ellipse(26176.422400, 23865.600000, 274.469408, 274.469408, 0.000000, X, Y)
[Wed Jun 20 01:57:15 2012] Writing source region out to fullrun_mos1_xmm0502510301_pi300-10000_pass1_cl_src5_src.reg
[Wed Jun 20 01:57:15 2012] Extracting stamp from image fullrun_mos1_xmm0502510301_pi300-10000_cl_sm2.00.img.gz, (286, 259) - (317, 291)
[Wed Jun 20 01:57:15 2012] XMMSAS bgd. selection expression = annulus(26176.422400, 23865.600000, 457.449013, 914.898026, X, Y) && !ellipse(24967.183600, 24566.858200, 297.793609, 297.793609, 0.000000, X, Y)
[Wed Jun 20 01:57:15 2012] Writing fullrun_mos1_xmm0502510301_pi300-10000_pass1_cl_src5.gif
[Wed Jun 20 01:57:18 2012] Mean detx,y = (292.26, -186.12) 
[Wed Jun 20 01:57:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 01:57:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 01:57:26 2012] Setting source spectrum file to fullrun_mos1_xmm0502510301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 20 01:57:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502510301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jun 20 02:26:18 2012] Updating aperture counts using extracted products
[Wed Jun 20 02:26:18 2012] Error reading totcts from fullrun_mos1_xmm0502510301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 20 02:26:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:26:18 2012] Using photon index=1.80, rate=0.0079, arf fullrun_mos1_xmm0502510301_pi300-10000_pass1_cl_src5.arf
[Wed Jun 20 02:26:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:26:18 2012] Updating source flux to 9.7e-14
[Wed Jun 20 02:26:32 2012] Reading fit data from xmm0502510301/analysis//spectral/fullrun_mos1_xmm0502510301_pi300-10000_pass1_cl_src5_pl.csv
[Wed Jun 20 02:26:32 2012] Spectral fit parameter nH value = 3.43379e+13
[Wed Jun 20 02:26:32 2012] Spectral fit parameter PhoIndex value = 1.54731
[Wed Jun 20 02:26:32 2012] Failed to get F(0.3-8.0) from xmm0502510301/analysis//spectral/fullrun_mos1_xmm0502510301_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Jun 20 02:26:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 02:26:32 2012] Using Nh = 3.4e+13, photon index=1.55, rate=0.0079, arf fullrun_mos1_xmm0502510301_pi300-10000_pass1_cl_src5.arf
[Wed Jun 20 02:26:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 02:26:32 2012] Updating source flux to 1.1e-13