[Sun Feb 12 02:41:53 2012] Detection parameters:
  Position = (252.7, 409.6) = 11 20 42.96 14 27 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.0 +/- 7.8
  Background counts = 8.9
  Rate = 0.002 +/- 0.0006

[Sun Feb 12 02:41:53 2012] Off-axis axis estimate = 8.72'
[Sun Feb 12 03:17:06 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 03:17:06 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Sun Feb 12 03:17:06 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.014
[Sun Feb 12 03:17:06 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.79"
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src11.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 03:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Feb 12 03:36:39 2012] Fit fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Feb 12 03:56:11 2012] Spatial fit model total counts = 136.492000, observed total counts = 136.000000
[Sun Feb 12 03:56:11 2012] Offset between fit and detection position for source 9 = 0.213810 pixels
[Sun Feb 12 03:56:11 2012] 134.515000 total counts/ 119.352000 bgd. counts: snr = 1.387939
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.213810 pixels
  Position = (252.6, 409.8) = 11 20 42.97 14 27 19.2
  Extent = 2.9 (2.7-4.2)", rotation angle = 0
  Source counts = 15.2 +/- 11.6
  Background counts = 119.4
  Rate = 0.0007 +/- 0.0005
  Deleting source due to low Poisson probability