[Sun Feb 12 02:41:53 2012] Detection parameters:
  Position = (234.6, 301.9) = 11 20 48.36 14 19 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.5 +/- 7.2
  Background counts = 8.4
  Rate = 0.002 +/- 0.0005

[Sun Feb 12 02:41:53 2012] Off-axis axis estimate = 4.64'
[Sun Feb 12 03:17:06 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 03:17:06 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Sun Feb 12 03:17:06 2012] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.555
[Sun Feb 12 03:17:06 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.75"
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src13.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src13.csv
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src13.csv
[Sun Feb 12 03:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Feb 12 03:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 03:56:11 2012] Spatial fit model total counts = 48.645100, observed total counts = 72.000000
[Sun Feb 12 03:56:11 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Feb 12 03:56:11 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 03:56:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 03:56:11 2012] Assessing source extent using major
[Sun Feb 12 03:56:11 2012] Source does appear to be extended
[Sun Feb 12 03:56:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 04:24:14 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 04:24:14 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Sun Feb 12 04:24:14 2012] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.555
[Sun Feb 12 04:24:14 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.75"
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src12.ximg exists
[Sun Feb 12 04:44:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src12.csv
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Feb 12 04:44:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src12.csv
[Sun Feb 12 04:44:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Feb 12 04:44:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Feb 12 04:44:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Feb 12 04:44:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 05:04:52 2012] Spatial fit model total counts = 48.948100, observed total counts = 72.000000
[Sun Feb 12 05:04:52 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Feb 12 05:04:52 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 05:04:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 05:04:52 2012] Assessing source extent using major
[Sun Feb 12 05:04:52 2012] Source does appear to be extended
[Sun Feb 12 05:04:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 05:32:48 2012] XMMSAS src. selection expression = ellipse(20359.386673, 26215.700287, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 12 05:32:48 2012] Writing source region out to fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src15_src.reg
[Sun Feb 12 05:32:48 2012] Extracting stamp from image fullrun_mos1_xmm0502510201_pi300-10000_cl_sm2.00.img.gz, (197, 264) - (272, 339)
[Sun Feb 12 05:32:48 2012] XMMSAS bgd. selection expression = annulus(20359.386673, 26215.700287, 1087.500000, 2175.000000, X, Y) && !ellipse(19565.221400, 28197.017400, 357.153610, 357.153610, 0.000000, X, Y)
[Sun Feb 12 05:32:48 2012] Writing fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src15.gif
[Sun Feb 12 05:35:25 2012] Mean detx,y = (951.38, -6214.03) 
[Sun Feb 12 05:35:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 05:35:38 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 05:35:39 2012] Setting source spectrum file to fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Feb 12 05:35:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Feb 12 05:40:14 2012] Not generating rmf since there are only 30 counts
[Sun Feb 12 05:40:14 2012] rmf not generated due to insufficient counts
[Sun Feb 12 05:49:11 2012] Updating aperture counts using extracted products
[Sun Feb 12 05:49:11 2012] Error reading totcts from fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Feb 12 05:49:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 05:49:11 2012] Using photon index=1.80, rate=0.00227, arf fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src15.arf
[Sun Feb 12 05:49:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 05:49:11 2012] Updating source flux to 4.3e-14
[Sun Feb 12 05:49:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting