[Sun Feb 12 02:41:53 2012] Detection parameters:
  Position = (313.9, 329.8) = 11 20 24.61 14 21 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.0 +/- 11.6
  Background counts = 8.7
  Rate = 0.004 +/- 0.0006

[Sun Feb 12 02:41:53 2012] Off-axis axis estimate = 2.54'
[Sun Feb 12 03:17:06 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 03:17:06 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Sun Feb 12 03:17:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.582
[Sun Feb 12 03:17:06 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.70"
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src7.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src7.csv
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src7.csv
[Sun Feb 12 03:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Feb 12 03:36:39 2012] Fit fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Feb 12 03:56:11 2012] Source 14 is offset by 0.242339 and 1.183349 pixels which is larger than
2 X fitted extent = 1.069779 x 1.069779, not incorporating fit results
[Sun Feb 12 03:56:11 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 03:56:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 03:56:11 2012] Assessing source extent using major
[Sun Feb 12 03:56:11 2012] Source does appear to be extended
[Sun Feb 12 03:56:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 04:24:14 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 04:24:14 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Sun Feb 12 04:24:14 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.582
[Sun Feb 12 04:24:14 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.70"
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src7.ximg exists
[Sun Feb 12 04:44:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src7.csv
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Feb 12 04:44:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src7.csv
[Sun Feb 12 04:44:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Feb 12 04:44:30 2012] Fit fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Feb 12 05:04:52 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 88.629266 pixels away
[Sun Feb 12 05:04:52 2012] Source 14 is offset by 0.244548 and 1.183878 pixels which is larger than
2 X fitted extent = 1.063030 x 1.063030, not incorporating fit results
[Sun Feb 12 05:04:52 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 05:04:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 05:04:52 2012] Assessing source extent using major
[Sun Feb 12 05:04:52 2012] Source does appear to be extended
[Sun Feb 12 05:04:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 05:32:48 2012] XMMSAS src. selection expression = ellipse(27262.586304, 28647.497375, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 12 05:32:48 2012] Writing source region out to fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src14_src.reg
[Sun Feb 12 05:32:48 2012] Extracting stamp from image fullrun_mos1_xmm0502510201_pi300-10000_cl_sm2.00.img.gz, (276, 292) - (351, 367)
[Sun Feb 12 05:32:48 2012] XMMSAS bgd. selection expression = annulus(27262.586304, 28647.497375, 1087.500000, 2175.000000, X, Y)
[Sun Feb 12 05:32:48 2012] Writing fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src14.gif
[Sun Feb 12 05:34:02 2012] Mean detx,y = (566.98, 897.65) 
[Sun Feb 12 05:34:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 05:34:12 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 05:34:12 2012] Setting source spectrum file to fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Feb 12 05:34:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Feb 12 05:39:55 2012] Not generating rmf since there are only 73 counts
[Sun Feb 12 05:39:55 2012] rmf not generated due to insufficient counts
[Sun Feb 12 05:49:11 2012] Updating aperture counts using extracted products
[Sun Feb 12 05:49:11 2012] Error reading totcts from fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Feb 12 05:49:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 05:49:11 2012] Using photon index=1.80, rate=0.00387, arf fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src14.arf
[Sun Feb 12 05:49:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 05:49:11 2012] Updating source flux to 3.8e-14
[Sun Feb 12 05:49:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting