[Sun Feb 12 02:41:53 2012] Detection parameters:
  Position = (188.0, 318.1) = 11 21 2.30 14 20 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.4 +/- 16.3
  Background counts = 8.5
  Rate = 0.008 +/- 0.0008

[Sun Feb 12 02:41:53 2012] Off-axis axis estimate = 8.13'
[Sun Feb 12 03:17:06 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 03:17:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 03:17:06 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Sun Feb 12 03:17:06 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.061
[Sun Feb 12 03:17:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.49"
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 12 03:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 03:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 12 03:36:39 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 12 03:36:39 2012] Fit fullrun_mos1_xmm0502510201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 12 03:56:11 2012] Spatial fit model total counts = 279.000000, observed total counts = 279.000000
[Sun Feb 12 03:56:11 2012] Offset between fit and detection position for source 1 = 0.162170 pixels
[Sun Feb 12 03:56:11 2012] 277.841000 total counts/ 158.321000 bgd. counts: snr = 9.498856
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.162170 pixels
  Position = (188.1, 318.2) = 11 21 2.28 14 20 40.6
  Extent = 5.3 (4.5-6.7)", rotation angle = 0
  Source counts = 119.5 +/- 16.7
  Background counts = 158.3
  Rate = 0.006 +/- 0.0008
[Sun Feb 12 03:56:11 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 03:56:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 03:56:11 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 03:56:11 2012] Source does appear to be extended
[Sun Feb 12 03:56:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 04:24:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 04:24:14 2012] Initial guess for spatial extent in simple fitting = 5.33"
[Sun Feb 12 04:24:14 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.345
[Sun Feb 12 04:24:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 12 04:44:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 12 04:44:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 04:44:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 12 04:44:30 2012] fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 12 04:44:30 2012] Fit fullrun_mos1_xmm0502510201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 12 05:04:52 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Sun Feb 12 05:04:52 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 05:04:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 05:04:52 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 05:04:52 2012] Source does appear to be extended
[Sun Feb 12 05:04:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 05:32:48 2012] XMMSAS src. selection expression = ellipse(16316.307000, 27635.582800, 319.635009, 319.635009, 0.000000, X, Y)
[Sun Feb 12 05:32:48 2012] Writing source region out to fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 12 05:32:48 2012] Extracting stamp from image fullrun_mos1_xmm0502510201_pi300-10000_cl_sm2.00.img.gz, (170, 300) - (206, 337)
[Sun Feb 12 05:32:48 2012] XMMSAS bgd. selection expression = annulus(16316.307000, 27635.582800, 532.725015, 1065.450031, X, Y)
[Sun Feb 12 05:32:48 2012] Writing fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src1.gif
[Sun Feb 12 05:32:50 2012] Mean detx,y = (3837.64, -9587.68) 
[Sun Feb 12 05:32:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 05:32:55 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 05:32:55 2012] Setting source spectrum file to fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 12 05:32:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Feb 12 05:49:11 2012] Updating aperture counts using extracted products
[Sun Feb 12 05:49:11 2012] Error reading totcts from fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 12 05:49:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 05:49:11 2012] Using photon index=1.80, rate=0.00553, arf fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src1.arf
[Sun Feb 12 05:49:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 05:49:11 2012] Updating source flux to 1.3e-13
[Sun Feb 12 05:49:17 2012] Reading fit data from xmm0502510201/analysis//spectral/fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Feb 12 05:49:17 2012] Spectral fit parameter nH value = 1.81726e+12
[Sun Feb 12 05:49:17 2012] Spectral fit parameter PhoIndex value = 1.81657
[Sun Feb 12 05:49:17 2012] Failed to get F(0.3-8.0) from xmm0502510201/analysis//spectral/fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Feb 12 05:49:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 05:49:17 2012] Using Nh = 1.8e+12, photon index=1.82, rate=0.00553, arf fullrun_mos1_xmm0502510201_pi300-10000_pass1_cl_src1.arf
[Sun Feb 12 05:49:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 05:49:17 2012] Updating source flux to 1.3e-13