[Fri Aug 31 10:49:50 2012] Detection parameters:
  Position = (336.2, 321.9) = 23 12 1.76 18 46 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.9 +/- 20.9
  Background counts = 122.8
  Rate = 0.005 +/- 0.0006

[Fri Aug 31 10:49:51 2012] Off-axis axis estimate = 3.23'
[Fri Aug 31 10:52:47 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 10:52:47 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Fri Aug 31 10:52:47 2012] source mask rpix=1.8, npix_max = 22, mask sum = 19, frac = 0.861
[Fri Aug 31 10:52:47 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.04"
[Fri Aug 31 11:13:44 2012] fullrun_pn_xmm0502500101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Aug 31 11:13:44 2012] fullrun_pn_xmm0502500101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Aug 31 11:13:44 2012] Fit fullrun_pn_xmm0502500101_pi300-10000_cl_pass0_src11 appears to have run properly
[Fri Aug 31 11:13:44 2012] fullrun_pn_xmm0502500101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Aug 31 11:13:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502500101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 31 11:13:44 2012] fullrun_pn_xmm0502500101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Aug 31 11:13:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502500101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 31 11:13:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502500101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502500101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 11:40:29 2012] Warning, spatial fit 11 centroid is now closest to src. 1
[Fri Aug 31 11:40:29 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 11:40:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 11:40:29 2012] Assessing source extent using major
[Fri Aug 31 11:40:29 2012] Source does appear to be extended
[Fri Aug 31 11:40:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 11:40:39 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 11:40:39 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Fri Aug 31 11:40:39 2012] source mask rpix=1.8, npix_max = 22, mask sum = 19, frac = 0.861
[Fri Aug 31 11:40:39 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.04"
[Fri Aug 31 12:03:40 2012] fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Aug 31 12:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_src11.csv
[Fri Aug 31 12:03:40 2012] fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Aug 31 12:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_src11.csv
[Fri Aug 31 12:03:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 12:03:40 2012] fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Aug 31 12:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Aug 31 12:03:40 2012] fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Aug 31 12:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Aug 31 12:03:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502500101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 12:25:28 2012] Spatial fit model total counts = 570.942000, observed total counts = 449.000000
[Fri Aug 31 12:25:28 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 12:25:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 12:25:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 12:25:28 2012] Assessing source extent using major
[Fri Aug 31 12:25:28 2012] Source does appear to be extended
[Fri Aug 31 12:25:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 12:25:38 2012] XMMSAS src. selection expression = ellipse(29202.271057, 27959.759827, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 12:25:38 2012] Writing source region out to fullrun_pn_xmm0502500101_pi300-10000_pass1_cl_src11_src.reg
[Fri Aug 31 12:25:38 2012] Extracting stamp from image fullrun_pn_xmm0502500101_pi300-10000_cl_sm2.00.img.gz, (299, 284) - (374, 359)
[Fri Aug 31 12:25:38 2012] XMMSAS bgd. selection expression = annulus(29202.271057, 27959.759827, 1087.500000, 2175.000000, X, Y) && !ellipse(27575.148400, 27169.190000, 422.092812, 422.092812, 0.000000, X, Y) && !ellipse(28627.839600, 25407.396800, 425.010412, 425.010412, 0.000000, X, Y) && !ellipse(30388.656400, 28835.507400, 444.879213, 444.879213, 0.000000, X, Y) && !ellipse(29832.983887, 29592.990479, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 12:25:38 2012] Writing fullrun_pn_xmm0502500101_pi300-10000_pass1_cl_src11.gif
[Fri Aug 31 12:30:52 2012] Mean detx,y = (1418.32, -1558.33) 
[Fri Aug 31 12:30:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 12:31:21 2012] grppha failed
[Fri Aug 31 12:31:21 2012] Setting source spectrum file to fullrun_pn_xmm0502500101_pi300-10000_pass1_cl_src11_src.pi.gz
[Fri Aug 31 12:31:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502500101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Aug 31 12:35:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 12:35:06 2012] rmf not generated due to insufficient counts
[Fri Aug 31 12:42:36 2012] Updating aperture counts using extracted products
[Fri Aug 31 12:42:37 2012] Error reading totcts from fullrun_pn_xmm0502500101_pi300-10000_pass1_cl_src11_src.pi.gz
[Fri Aug 31 12:42:37 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 12:42:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 12:42:41 2012] xmm0502500101/analysis//spectral/fullrun_pn_xmm0502500101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete