[Fri May 24 20:44:27 2013] Detection parameters:
  Position = (349.1, 399.2) = 16 14 56.16 -63 35 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.2 +/- 14.5
  Background counts = 25.2
  Rate = 0.01 +/- 0.002

[Fri May 24 20:44:27 2013] Off-axis axis estimate = 8.17'
[Fri May 24 20:58:35 2013] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Fri May 24 20:58:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 20:58:35 2013] Initial guess for spatial extent in simple fitting = 10.52"
[Fri May 24 20:58:35 2013] source mask rpix=2.4, npix_max = 34, mask sum = 34, frac = 0.999
[Fri May 24 20:58:35 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.52"
[Fri May 24 21:03:28 2013] fullrun_mos2_xmm0502490101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 24 21:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502490101_pi300-10000_cl_pass0_src1.csv
[Fri May 24 21:03:28 2013] fullrun_mos2_xmm0502490101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 24 21:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502490101_pi300-10000_cl_pass0_src1.csv
[Fri May 24 21:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502490101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502490101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:03:28 2013] fullrun_mos2_xmm0502490101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 24 21:03:28 2013] fullrun_mos2_xmm0502490101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 24 21:03:28 2013] Fit fullrun_mos2_xmm0502490101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 24 21:03:31 2013] Spatial fit model total counts = 366.911000, observed total counts = 336.000000
[Fri May 24 21:03:31 2013] Offset between fit and detection position for source 1 = 0.276874 pixels
[Fri May 24 21:03:31 2013] 367.133500 total counts/ 291.755000 bgd. counts: snr = 4.413045
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.276874 pixels
  Position = (348.9, 399.4) = 16 14 56.28 -63 35 28.1
  Extent = 4.9 (3.7-6.2)", rotation angle = 0
  Source counts = 75.4 +/- 19.2
  Background counts = 291.8
  Rate = 0.006 +/- 0.002
[Fri May 24 21:03:31 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:03:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:03:31 2013] Assessing source extent using major axis lower bound
[Fri May 24 21:03:31 2013] Source does appear to be extended
[Fri May 24 21:03:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:17:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 21:17:28 2013] Initial guess for spatial extent in simple fitting = 4.91"
[Fri May 24 21:17:28 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.131
[Fri May 24 21:17:28 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 4.91"
[Fri May 24 21:23:39 2013] fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 24 21:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_src1.csv
[Fri May 24 21:23:39 2013] fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 24 21:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_src1.csv
[Fri May 24 21:23:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:23:39 2013] fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 24 21:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 24 21:23:39 2013] fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 24 21:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 24 21:23:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502490101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:23:45 2013] Spatial fit model total counts = 287.845000, observed total counts = 260.000000
[Fri May 24 21:23:45 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:23:45 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:23:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:23:45 2013] Assessing source extent using major axis lower bound
[Fri May 24 21:23:45 2013] Source does appear to be extended
[Fri May 24 21:23:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:37:20 2013] XMMSAS src. selection expression = ellipse(30303.495800, 34699.171380, 294.512408, 294.512408, 0.000000, X, Y)
[Fri May 24 21:37:20 2013] Writing source region out to fullrun_mos2_xmm0502490101_pi300-10000_pass1_cl_src1_src.reg
[Fri May 24 21:37:20 2013] Extracting stamp from image fullrun_mos2_xmm0502490101_pi300-10000_cl_sm2.00.img.gz, (332, 382) - (366, 416)
[Fri May 24 21:37:20 2013] XMMSAS bgd. selection expression = annulus(30303.495800, 34699.171380, 490.854014, 981.708028, X, Y)
[Fri May 24 21:37:20 2013] Writing fullrun_mos2_xmm0502490101_pi300-10000_pass1_cl_src1.gif
[Fri May 24 21:37:22 2013] Mean detx,y = (-6263.17, 4745.39) 
[Fri May 24 21:37:23 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 21:37:32 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 21:37:32 2013] Setting source spectrum file to fullrun_mos2_xmm0502490101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 24 21:37:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502490101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 24 21:38:12 2013] Not generating rmf since there are only 75 counts
[Fri May 24 21:38:12 2013] rmf not generated due to insufficient counts
[Fri May 24 21:38:51 2013] Updating aperture counts using extracted products
[Fri May 24 21:38:51 2013] Total counts from fullrun_mos2_xmm0502490101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 102.00
[Fri May 24 21:38:51 2013] Total counts from fullrun_mos2_xmm0502490101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 204.00
[Fri May 24 21:38:51 2013] Got source and background scale factors 266152.000000, 2084044.000000
[Fri May 24 21:38:51 2013] User source parameters:
  Position = (348.9, 399.4) = 16 14 56.28 -63 35 28.1
  Extent = 4.9 (3.7-6.2)", rotation angle = 0
  Source aperture counts = 75.9 +/- 11.1
  Background aperture counts = 26.1
  Rate = 0.006 +/- 0.0009

[Fri May 24 21:38:52 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 21:38:52 2013] Using photon index=1.80, rate=0.00607, arf fullrun_mos2_xmm0502490101_pi300-10000_pass1_cl_src1.arf
[Fri May 24 21:38:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 21:38:52 2013] Updating source flux to 1.7e-13
[Fri May 24 21:38:53 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri May 24 21:38:53 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 24 21:38:54 2013] xmm0502490101/analysis//spectral/fullrun_mos2_xmm0502490101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete