[Sun Jun 23 08:17:39 2013] Detection parameters:
  Position = (321.7, 223.8) = 7 2 30.15 -28 46 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.2 +/- 10.2
  Background counts = 15.3
  Rate = 0.008 +/- 0.001

[Sun Jun 23 08:17:40 2013] Off-axis axis estimate = 5.66'
[Sun Jun 23 08:19:49 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 08:19:49 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Sun Jun 23 08:19:49 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.904
[Sun Jun 23 08:19:49 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.26"
[Sun Jun 23 09:02:28 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun 23 09:02:28 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src17.csv
[Sun Jun 23 09:02:28 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun 23 09:02:28 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src17.csv
[Sun Jun 23 09:02:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:02:29 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun 23 09:02:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun 23 09:02:29 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun 23 09:02:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun 23 09:02:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:41:27 2013] Spatial fit model total counts = -7.111030, observed total counts = 153.000000
[Sun Jun 23 09:41:27 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 09:41:28 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 09:41:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 09:41:28 2013] Assessing source extent using major
[Sun Jun 23 09:41:28 2013] Source does appear to be extended
[Sun Jun 23 09:41:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 09:41:38 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:41:38 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Sun Jun 23 09:41:38 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.904
[Sun Jun 23 09:41:38 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.26"
[Sun Jun 23 10:17:03 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun 23 10:17:03 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_src17.csv
[Sun Jun 23 10:17:03 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun 23 10:17:03 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_src17.csv
[Sun Jun 23 10:17:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:17:04 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun 23 10:17:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 23 10:17:04 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun 23 10:17:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 23 10:17:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:52:37 2013] Spatial fit model total counts = -155.785000, observed total counts = 153.000000
[Sun Jun 23 10:52:37 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 10:52:37 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.274878 pixels away
[Sun Jun 23 10:52:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:52:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:52:37 2013] Assessing source extent using major
[Sun Jun 23 10:52:37 2013] Source does appear to be extended
[Sun Jun 23 10:52:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:52:48 2013] XMMSAS src. selection expression = ellipse(27936.618591, 19425.104431, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 10:52:48 2013] Writing source region out to fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src17_src.reg
[Sun Jun 23 10:52:48 2013] Extracting stamp from image fullrun_pn_xmm0502481901_pi300-10000_cl_sm2.00.img.gz, (284, 186) - (359, 261)
[Sun Jun 23 10:52:48 2013] XMMSAS bgd. selection expression = annulus(27936.618591, 19425.104431, 1087.500000, 2175.000000, X, Y) && !ellipse(26938.870560, 16854.221000, 518.164815, 327.968009, 334.749249, X, Y) && !ellipse(27061.930400, 19129.796600, 426.310412, 426.310412, 0.000000, X, Y)
[Sun Jun 23 10:52:48 2013] Writing fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src17.gif
[Sun Jun 23 11:01:41 2013] Mean detx,y = (-1699.42, -5267.93) 
[Sun Jun 23 11:01:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 11:02:08 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 11:02:08 2013] Setting source spectrum file to fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jun 23 11:02:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun 23 11:17:18 2013] Not generating rmf since there are only 60 counts
[Sun Jun 23 11:17:18 2013] rmf not generated due to insufficient counts
[Sun Jun 23 11:38:22 2013] Updating aperture counts using extracted products
[Sun Jun 23 11:38:22 2013] Total counts from fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 126.00
[Sun Jun 23 11:38:22 2013] Total counts from fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src17_bgd.pi.gz = 745.00
[Sun Jun 23 11:38:22 2013] Got source and background scale factors 1078845.000000, 8789905.000000
[Sun Jun 23 11:38:22 2013] User source parameters:
  Position = (321.7, 223.8) = 7 2 30.15 -28 46 47.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 34.6 +/- 12.3
  Background aperture counts = 91.4
  Rate = 0.003 +/- 0.001

[Sun Jun 23 11:38:22 2013] Updating counts from extracted products
[Sun Jun 23 11:38:22 2013] Set source signif. to 34.56/9.56 = 3.61
[Sun Jun 23 11:38:24 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 11:38:24 2013] Using photon index=1.80, rate=0.00275, arf fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src17.arf
[Sun Jun 23 11:38:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 11:38:24 2013] Updating source flux to 1.6e-14
[Sun Jun 23 11:38:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 11:38:46 2013] xmm0502481901/analysis//spectral/fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete