[Sun Jun 23 08:17:39 2013] Detection parameters: Position = (210.8, 262.3) = 7 3 6.81 -28 43 59.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 50.2 +/- 10.4 Background counts = 16.5 Rate = 0.006 +/- 0.001 [Sun Jun 23 08:17:40 2013] Off-axis axis estimate = 6.87' [Sun Jun 23 08:19:49 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting [Sun Jun 23 08:19:49 2013] Initial guess for spatial extent in simple fitting = 9.86" [Sun Jun 23 08:19:49 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.979 [Sun Jun 23 08:19:49 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.86" [Sun Jun 23 09:02:28 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src15.ximg exists [Sun Jun 23 09:02:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src15.csv [Sun Jun 23 09:02:28 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src15_1.ximg exists [Sun Jun 23 09:02:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src15.csv [Sun Jun 23 09:02:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 23 09:02:29 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Sun Jun 23 09:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src15.csv [Sun Jun 23 09:02:29 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Sun Jun 23 09:02:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src15.csv [Sun Jun 23 09:02:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 23 09:41:27 2013] Source 15 is offset by 7.339140 and 6.136814 pixels which is larger than 2 X fitted extent = 1.200212 x 1.200212, not incorporating fit results [Sun Jun 23 09:41:28 2013] Vigneting correction estimate = 1.000000 [Sun Jun 23 09:41:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 23 09:41:28 2013] Assessing source extent using major [Sun Jun 23 09:41:28 2013] Source does appear to be extended [Sun Jun 23 09:41:28 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 23 09:41:38 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting [Sun Jun 23 09:41:38 2013] Initial guess for spatial extent in simple fitting = 9.86" [Sun Jun 23 09:41:38 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.979 [Sun Jun 23 09:41:38 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 9.86" [Sun Jun 23 10:17:03 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_src15.ximg exists [Sun Jun 23 10:17:03 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_src15_1.ximg exists [Sun Jun 23 10:17:03 2013] Fit fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_src15 appears to have run properly [Sun Jun 23 10:17:04 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Sun Jun 23 10:17:04 2013] fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Sun Jun 23 10:17:04 2013] Fit fullrun_pn_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly [Sun Jun 23 10:52:37 2013] Spatial fit model total counts = 184.576000, observed total counts = 174.000000 [Sun Jun 23 10:52:37 2013] Offset between fit and detection position for source 15 = 0.274044 pixels [Sun Jun 23 10:52:37 2013] 184.775100 total counts/ 142.142000 bgd. counts: snr = 3.575903 Spatial fit parameters: Offset between fit and detection position for source 15 = 0.274044 pixels Position = (210.9, 262.6) = 7 3 6.80 -28 43 58.9 Extent = 8.6 (5.6-13.2)" x 4.2 (2.8-6.2)", rotation angle = 77 (52-104) degrees Source counts = 42.6 +/- 13.6 Background counts = 142.1 Rate = 0.003 +/- 0.001 [Sun Jun 23 10:52:37 2013] Vigneting correction estimate = 1.000000 [Sun Jun 23 10:52:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 23 10:52:37 2013] Assessing source extent using major axis lower bound [Sun Jun 23 10:52:37 2013] Source does appear to be extended [Sun Jun 23 10:52:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89 [Sun Jun 23 10:52:48 2013] XMMSAS src. selection expression = ellipse(18298.179120, 22795.849600, 515.174415, 252.677407, 76.719903, X, Y) [Sun Jun 23 10:52:48 2013] Writing source region out to fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src15_src.reg [Sun Jun 23 10:52:48 2013] Extracting stamp from image fullrun_pn_xmm0502481901_pi300-10000_cl_sm2.00.img.gz, (181, 233) - (240, 292) [Sun Jun 23 10:52:48 2013] XMMSAS bgd. selection expression = annulus(18298.179120, 22795.849600, 858.624025, 1717.248049, X, Y) [Sun Jun 23 10:52:48 2013] Writing fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src15.gif [Sun Jun 23 11:00:30 2013] Mean detx,y = (6994.35, -132.10) [Sun Jun 23 11:00:32 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 23 11:01:03 2013] Binned source spectrum to 10 counts/bin [Sun Jun 23 11:01:03 2013] Setting source spectrum file to fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Sun Jun 23 11:01:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src15_bgd.pi.gz [Sun Jun 23 11:17:00 2013] Not generating rmf since there are only 42 counts [Sun Jun 23 11:17:00 2013] rmf not generated due to insufficient counts [Sun Jun 23 11:38:22 2013] Updating aperture counts using extracted products [Sun Jun 23 11:38:22 2013] Total counts from fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 68.00 [Sun Jun 23 11:38:22 2013] Total counts from fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src15_bgd.pi.gz = 479.00 [Sun Jun 23 11:38:22 2013] Got source and background scale factors 416000.000000, 5667839.000000 [Sun Jun 23 11:38:22 2013] User source parameters: Position = (210.9, 262.6) = 7 3 6.80 -28 43 58.9 Extent = 8.6 (5.6-13.2)" x 4.2 (2.8-6.2)", rotation angle = 77 (52-104) degrees Source aperture counts = 32.8 +/- 9.3 Background aperture counts = 35.2 Rate = 0.003 +/- 0.0007 [Sun Jun 23 11:38:24 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 23 11:38:24 2013] Using photon index=1.80, rate=0.0034, arf fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src15.arf [Sun Jun 23 11:38:24 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 23 11:38:24 2013] Updating source flux to 1.8e-14 [Sun Jun 23 11:38:40 2013] Flag b found in src. 15 procflags, skipping spectral fitting [Sun Jun 23 11:38:40 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting [Sun Jun 23 11:38:46 2013] xmm0502481901/analysis//spectral/fullrun_pn_xmm0502481901_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete