[Sun Jun 23 08:18:02 2013] Detection parameters:
  Position = (353.8, 358.1) = 7 2 19.53 -28 37 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.7 +/- 12.1
  Background counts = 5.7
  Rate = 0.01 +/- 0.002

[Sun Jun 23 08:18:03 2013] Off-axis axis estimate = 5.90'
[Sun Jun 23 09:02:29 2013] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:02:29 2013] Initial guess for spatial extent in simple fitting = 9.38"
[Sun Jun 23 09:02:29 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.886
[Sun Jun 23 09:02:29 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.38"
[Sun Jun 23 09:23:07 2013] fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 23 09:23:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_src3.csv
[Sun Jun 23 09:23:07 2013] fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 23 09:23:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_src3.csv
[Sun Jun 23 09:23:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:23:07 2013] fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 23 09:23:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 23 09:23:07 2013] fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 23 09:23:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 23 09:23:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502481901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:41:30 2013] Spatial fit model total counts = 170.741000, observed total counts = 133.000000
[Sun Jun 23 09:41:30 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 09:41:30 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 09:41:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 09:41:30 2013] Assessing source extent using major
[Sun Jun 23 09:41:30 2013] Source does appear to be extended
[Sun Jun 23 09:41:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:17:04 2013] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:17:04 2013] Initial guess for spatial extent in simple fitting = 9.38"
[Sun Jun 23 10:17:04 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.886
[Sun Jun 23 10:17:04 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.38"
[Sun Jun 23 10:37:03 2013] fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 23 10:37:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_src3.csv
[Sun Jun 23 10:37:03 2013] fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 23 10:37:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_src3.csv
[Sun Jun 23 10:37:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:37:04 2013] fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 23 10:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 23 10:37:04 2013] fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 23 10:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 23 10:37:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502481901_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:52:39 2013] Spatial fit model total counts = 169.481000, observed total counts = 133.000000
[Sun Jun 23 10:52:39 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 10:52:39 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:52:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:52:39 2013] Assessing source extent using major
[Sun Jun 23 10:52:39 2013] Source does appear to be extended
[Sun Jun 23 10:52:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 11:18:09 2013] XMMSAS src. selection expression = ellipse(30736.307159, 31103.338409, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 11:18:09 2013] Writing source region out to fullrun_mos1_xmm0502481901_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 23 11:18:09 2013] Extracting stamp from image fullrun_mos1_xmm0502481901_pi300-10000_cl_sm2.00.img.gz, (316, 321) - (391, 396)
[Sun Jun 23 11:18:09 2013] XMMSAS bgd. selection expression = annulus(30736.307159, 31103.338409, 1087.500000, 2175.000000, X, Y)
[Sun Jun 23 11:18:09 2013] Writing fullrun_mos1_xmm0502481901_pi300-10000_pass1_cl_src3.gif
[Sun Jun 23 11:18:33 2013] Mean detx,y = (-5580.47, -7126.71) 
[Sun Jun 23 11:18:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 11:18:55 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 11:18:55 2013] Setting source spectrum file to fullrun_mos1_xmm0502481901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 23 11:18:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502481901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 23 11:29:03 2013] Not generating rmf since there are only 99 counts
[Sun Jun 23 11:29:03 2013] rmf not generated due to insufficient counts
[Sun Jun 23 11:38:25 2013] Updating aperture counts using extracted products
[Sun Jun 23 11:38:25 2013] Total counts from fullrun_mos1_xmm0502481901_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 123.00
[Sun Jun 23 11:38:25 2013] Total counts from fullrun_mos1_xmm0502481901_pi300-10000_pass1_cl_src3_bgd.pi.gz = 272.00
[Sun Jun 23 11:38:25 2013] Got source and background scale factors 990600.000000, 9223085.000000
[Sun Jun 23 11:38:25 2013] User source parameters:
  Position = (353.8, 358.1) = 7 2 19.53 -28 37 3.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 93.8 +/- 12.1
  Background aperture counts = 29.2
  Rate = 0.007 +/- 0.0009

[Sun Jun 23 11:38:25 2013] Updating counts from extracted products
[Sun Jun 23 11:38:25 2013] Set source signif. to 93.79/5.40 = 17.35
[Sun Jun 23 11:38:31 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 11:38:31 2013] Using photon index=1.80, rate=0.00664, arf fullrun_mos1_xmm0502481901_pi300-10000_pass1_cl_src3.arf
[Sun Jun 23 11:38:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 11:38:31 2013] Updating source flux to 1.3e-13
[Sun Jun 23 11:38:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 11:38:37 2013] xmm0502481901/analysis//spectral/fullrun_mos1_xmm0502481901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete