[Fri Sep 23 22:12:29 2011] Detection parameters:
  Position = (289.9, 284.1) = 13 20 25.10 -20 36 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 278.9 +/- 21.2
  Background counts = 13.9
  Rate = 0.03 +/- 0.002

[Fri Sep 23 22:12:29 2011] Off-axis axis estimate = 1.21'
[Fri Sep 23 22:30:39 2011] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 22:30:39 2011] Initial guess for spatial extent in simple fitting = 7.03"
[Fri Sep 23 22:30:39 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Fri Sep 23 22:30:39 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.03"
[Fri Sep 23 22:34:56 2011] fullrun_mos2_xmm0502481501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 23 22:34:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502481501_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 22:34:56 2011] fullrun_mos2_xmm0502481501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 23 22:34:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502481501_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 22:34:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502481501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502481501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 22:34:56 2011] fullrun_mos2_xmm0502481501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 22:34:56 2011] fullrun_mos2_xmm0502481501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 22:34:56 2011] Fit fullrun_mos2_xmm0502481501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 22:34:58 2011] Spatial fit model total counts = 410.123000, observed total counts = 408.000000
[Fri Sep 23 22:34:58 2011] Offset between fit and detection position for source 2 = 0.236688 pixels
[Fri Sep 23 22:34:58 2011] 417.239000 total counts/ 219.754000 bgd. counts: snr = 13.321886
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.236688 pixels
  Position = (290.0, 283.9) = 13 20 25.06 -20 36 38.4
  Extent = 9.1 (7.6-11.0)", rotation angle = 0
  Source counts = 197.5 +/- 20.4
  Background counts = 219.8
  Rate = 0.03 +/- 0.003
[Fri Sep 23 22:34:58 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 22:34:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 22:34:58 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 22:34:58 2011] Source does appear to be extended
[Fri Sep 23 22:34:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 22:51:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 22:51:37 2011] Initial guess for spatial extent in simple fitting = 9.06"
[Fri Sep 23 22:51:37 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.124
[Fri Sep 23 22:51:37 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.06"
[Fri Sep 23 22:55:27 2011] fullrun_mos2_xmm0502481501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 23 22:55:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502481501_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 22:55:27 2011] fullrun_mos2_xmm0502481501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 23 22:55:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502481501_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 22:55:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502481501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502481501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 22:55:27 2011] fullrun_mos2_xmm0502481501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 22:55:27 2011] fullrun_mos2_xmm0502481501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 22:55:27 2011] Fit fullrun_mos2_xmm0502481501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 22:55:29 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Sep 23 22:55:29 2011] Spatial fit model total counts = 357.724000, observed total counts = 356.000000
[Fri Sep 23 22:55:29 2011] Offset between fit and detection position for source 2 = 0.248985 pixels
[Fri Sep 23 22:55:29 2011] Warning, changing simple spatial fit ID from 1 to 3
[Fri Sep 23 22:55:29 2011] 349.067000 total counts/ 215.875000 bgd. counts: snr = 9.065191
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.248985 pixels
  Position = (290.0, 284.1) = 13 20 25.07 -20 36 37.4
  Extent = 7.7 (6.1-11.1)", rotation angle = 0
  Source counts = 133.2 +/- 18.7
  Background counts = 215.9
  Rate = 0.02 +/- 0.002
[Fri Sep 23 22:55:29 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 22:55:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 22:55:29 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 22:55:29 2011] Source does appear to be extended
[Fri Sep 23 22:55:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 23:17:39 2011] XMMSAS src. selection expression = ellipse(25183.494000, 24668.356000, 462.265813, 462.265813, 0.000000, X, Y)
[Fri Sep 23 23:17:39 2011] Writing source region out to fullrun_mos2_xmm0502481501_pi300-10000_pass1_cl_src2_src.reg
[Fri Sep 23 23:17:39 2011] Extracting stamp from image fullrun_mos2_xmm0502481501_pi300-10000_cl_sm2.00.img.gz, (263, 258) - (317, 311)
[Fri Sep 23 23:17:39 2011] XMMSAS bgd. selection expression = annulus(25183.494000, 24668.356000, 770.443022, 1540.886044, X, Y) && !ellipse(25758.023682, 25080.547821, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 23 23:17:39 2011] Writing fullrun_mos2_xmm0502481501_pi300-10000_pass1_cl_src2.gif
[Fri Sep 23 23:17:41 2011] Mean detx,y = (33.60, -751.41) 
[Fri Sep 23 23:17:42 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 23:17:49 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 23:17:49 2011] Setting source spectrum file to fullrun_mos2_xmm0502481501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Sep 23 23:17:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502481501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Sep 23 23:22:13 2011] Updating aperture counts using extracted products
[Fri Sep 23 23:22:13 2011] Error reading totcts from fullrun_mos2_xmm0502481501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Sep 23 23:22:13 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 23:22:13 2011] Using photon index=1.80, rate=0.0169, arf fullrun_mos2_xmm0502481501_pi300-10000_pass1_cl_src2.arf
[Fri Sep 23 23:22:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 23:22:13 2011] Updating source flux to 2e-13
[Fri Sep 23 23:22:29 2011] Reading fit data from xmm0502481501/analysis//spectral/fullrun_mos2_xmm0502481501_pi300-10000_pass1_cl_src2_pl.csv
[Fri Sep 23 23:22:29 2011] Spectral fit parameter nH value = 2.68408e+21
[Fri Sep 23 23:22:29 2011] Spectral fit parameter PhoIndex value = 3.55167
[Fri Sep 23 23:22:29 2011] Failed to get F(0.3-8.0) from xmm0502481501/analysis//spectral/fullrun_mos2_xmm0502481501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 23:22:29 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 23:22:29 2011] Using Nh = 2.7e+21, photon index=3.55, rate=0.0169, arf fullrun_mos2_xmm0502481501_pi300-10000_pass1_cl_src2.arf
[Fri Sep 23 23:22:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 23:22:29 2011] Updating source flux to 1.4e-13