[Fri Sep 23 22:12:16 2011] Detection parameters:
  Position = (337.6, 158.4) = 13 20 10.32 -20 45 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 10.4
  Background counts = 13.0
  Rate = 0.01 +/- 0.002

[Fri Sep 23 22:12:17 2011] Off-axis axis estimate = 10.54'
[Fri Sep 23 22:20:49 2011] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 22:20:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 22:20:49 2011] Initial guess for spatial extent in simple fitting = 11.70"
[Fri Sep 23 22:20:49 2011] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.204
[Fri Sep 23 22:20:49 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.70"
[Fri Sep 23 22:30:38 2011] fullrun_mos1_xmm0502481501_pi300-10000_cl_pass0_src2.ximg exists
[Fri Sep 23 22:30:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481501_pi300-10000_cl_pass0_src2.csv
[Fri Sep 23 22:30:38 2011] fullrun_mos1_xmm0502481501_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Sep 23 22:30:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481501_pi300-10000_cl_pass0_src2.csv
[Fri Sep 23 22:30:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502481501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502481501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 22:30:39 2011] fullrun_mos1_xmm0502481501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 23 22:30:39 2011] fullrun_mos1_xmm0502481501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 23 22:30:39 2011] Fit fullrun_mos1_xmm0502481501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 23 22:34:58 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.297681 pixels away
[Fri Sep 23 22:34:58 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 22:34:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 22:34:58 2011] Assessing source extent using major
[Fri Sep 23 22:34:58 2011] Source does appear to be extended
[Fri Sep 23 22:34:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 22:43:31 2011] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 22:43:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 22:43:31 2011] Initial guess for spatial extent in simple fitting = 11.70"
[Fri Sep 23 22:43:31 2011] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.204
[Fri Sep 23 22:43:31 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 11.70"
[Fri Sep 23 22:51:37 2011] fullrun_mos1_xmm0502481501_pi300-10000_cl_pass1_src2.ximg exists
[Fri Sep 23 22:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481501_pi300-10000_cl_pass1_src2.csv
[Fri Sep 23 22:51:37 2011] fullrun_mos1_xmm0502481501_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Sep 23 22:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502481501_pi300-10000_cl_pass1_src2.csv
[Fri Sep 23 22:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502481501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502481501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 22:51:37 2011] fullrun_mos1_xmm0502481501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 23 22:51:37 2011] fullrun_mos1_xmm0502481501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 23 22:51:37 2011] Fit fullrun_mos1_xmm0502481501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 23 22:55:28 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.979410 pixels away
[Fri Sep 23 22:55:28 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 22:55:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 22:55:28 2011] Assessing source extent using major
[Fri Sep 23 22:55:28 2011] Source does appear to be extended
[Fri Sep 23 22:55:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 23:12:21 2011] XMMSAS src. selection expression = ellipse(29320.122498, 13729.408142, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 23 23:12:21 2011] Writing source region out to fullrun_mos1_xmm0502481501_pi300-10000_pass1_cl_src5_src.reg
[Fri Sep 23 23:12:21 2011] Extracting stamp from image fullrun_mos1_xmm0502481501_pi300-10000_cl_sm2.00.img.gz, (300, 121) - (375, 196)
[Fri Sep 23 23:12:21 2011] XMMSAS bgd. selection expression = annulus(29320.122498, 13729.408142, 1087.500000, 2175.000000, X, Y)
[Fri Sep 23 23:12:21 2011] Writing fullrun_mos1_xmm0502481501_pi300-10000_pass1_cl_src5.gif
[Fri Sep 23 23:12:28 2011] Mean detx,y = (11139.02, 257.35) 
[Fri Sep 23 23:12:28 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 23:12:33 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 23:12:33 2011] Setting source spectrum file to fullrun_mos1_xmm0502481501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Sep 23 23:12:33 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502481501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Sep 23 23:17:30 2011] Not generating rmf since there are only 56 counts
[Fri Sep 23 23:17:30 2011] rmf not generated due to insufficient counts
[Fri Sep 23 23:22:13 2011] Updating aperture counts using extracted products
[Fri Sep 23 23:22:13 2011] Error reading totcts from fullrun_mos1_xmm0502481501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Sep 23 23:22:13 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 23:22:13 2011] Using photon index=1.80, rate=0.0114, arf fullrun_mos1_xmm0502481501_pi300-10000_pass1_cl_src5.arf
[Fri Sep 23 23:22:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 23:22:13 2011] Updating source flux to 2.1e-13
[Fri Sep 23 23:22:14 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting