[Thu Aug  2 11:31:38 2012] Detection parameters:
  Position = (156.3, 342.2) = 21 17 26.27 -48 17 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.7 +/- 19.7
  Background counts = 75.9
  Rate = 0.02 +/- 0.002

[Thu Aug  2 11:31:38 2012] Off-axis axis estimate = 10.79'
[Thu Aug  2 11:46:27 2012] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 11:46:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 11:46:27 2012] Initial guess for spatial extent in simple fitting = 11.82"
[Thu Aug  2 11:46:27 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.869
[Thu Aug  2 11:46:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.82"
[Thu Aug  2 11:56:34 2012] fullrun_mos2_xmm0502481001_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  2 11:56:34 2012] fullrun_mos2_xmm0502481001_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  2 11:56:34 2012] Fit fullrun_mos2_xmm0502481001_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Aug  2 11:56:34 2012] fullrun_mos2_xmm0502481001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  2 11:56:34 2012] fullrun_mos2_xmm0502481001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  2 11:56:34 2012] Fit fullrun_mos2_xmm0502481001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug  2 11:56:38 2012] Spatial fit model total counts = 375.996000, observed total counts = 376.000000
[Thu Aug  2 11:56:38 2012] Offset between fit and detection position for source 1 = 0.435963 pixels
[Thu Aug  2 11:56:38 2012] 374.932000 total counts/ 341.440000 bgd. counts: snr = 1.812524
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.435963 pixels
  Position = (156.2, 342.7) = 21 17 26.30 -48 17 28.8
  Extent = 5.1 (3.3-8.2)", rotation angle = 0
  Source counts = 33.5 +/- 19.4
  Background counts = 341.4
  Rate = 0.006 +/- 0.003
[Thu Aug  2 11:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:56:38 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 11:56:38 2012] Source does appear to be extended
[Thu Aug  2 11:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 12:06:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 12:06:05 2012] Initial guess for spatial extent in simple fitting = 5.13"
[Thu Aug  2 12:06:05 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.799
[Thu Aug  2 12:06:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.13"
[Thu Aug  2 12:12:12 2012] fullrun_mos2_xmm0502481001_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  2 12:12:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502481001_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 12:12:12 2012] fullrun_mos2_xmm0502481001_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  2 12:12:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502481001_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 12:12:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502481001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502481001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 12:12:12 2012] fullrun_mos2_xmm0502481001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  2 12:12:12 2012] fullrun_mos2_xmm0502481001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  2 12:12:12 2012] Fit fullrun_mos2_xmm0502481001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  2 12:12:15 2012] Spatial fit model total counts = 211.998000, observed total counts = 212.000000
[Thu Aug  2 12:12:15 2012] Offset between fit and detection position for source 1 = 0.044399 pixels
[Thu Aug  2 12:12:15 2012] 211.508800 total counts/ 176.871000 bgd. counts: snr = 2.604486
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.044399 pixels
  Position = (156.2, 342.6) = 21 17 26.29 -48 17 28.9
  Extent = 5.3 (3.3-8.7)", rotation angle = 0
  Source counts = 34.6 +/- 14.5
  Background counts = 176.9
  Rate = 0.006 +/- 0.003
[Thu Aug  2 12:12:15 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 12:12:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 12:12:15 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 12:12:15 2012] Source does appear to be extended
[Thu Aug  2 12:12:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 12:15:45 2012] XMMSAS src. selection expression = ellipse(13544.453800, 29760.017600, 315.378009, 315.378009, 0.000000, X, Y)
[Thu Aug  2 12:15:45 2012] Writing source region out to fullrun_mos2_xmm0502481001_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug  2 12:15:45 2012] Extracting stamp from image fullrun_mos2_xmm0502481001_pi300-10000_cl_sm2.00.img.gz, (138, 325) - (174, 361)
[Thu Aug  2 12:15:45 2012] XMMSAS bgd. selection expression = annulus(13544.453800, 29760.017600, 525.630015, 1051.260030, X, Y)
[Thu Aug  2 12:15:45 2012] Writing fullrun_mos2_xmm0502481001_pi300-10000_pass1_cl_src1.gif
[Thu Aug  2 12:15:47 2012] Mean detx,y = (-11758.86, -1458.14) 
[Thu Aug  2 12:15:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 12:15:54 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 12:15:55 2012] Setting source spectrum file to fullrun_mos2_xmm0502481001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 12:15:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502481001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  2 12:17:14 2012] Not generating rmf since there are only 34 counts
[Thu Aug  2 12:17:14 2012] rmf not generated due to insufficient counts
[Thu Aug  2 12:18:22 2012] Updating aperture counts using extracted products
[Thu Aug  2 12:18:22 2012] Error reading totcts from fullrun_mos2_xmm0502481001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 12:18:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 12:18:22 2012] Using photon index=1.80, rate=0.00622, arf fullrun_mos2_xmm0502481001_pi300-10000_pass1_cl_src1.arf
[Thu Aug  2 12:18:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 12:18:22 2012] Updating source flux to 1.5e-13
[Thu Aug  2 12:18:23 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Aug  2 12:18:24 2012] xmm0502481001/analysis//spectral/fullrun_mos2_xmm0502481001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete