[Sat Sep 24 02:11:49 2011] Detection parameters:
  Position = (168.9, 406.2) = 11 55 22.09 -13 51 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.7 +/- 18.5
  Background counts = 110.3
  Rate = 0.01 +/- 0.002

[Sat Sep 24 02:11:49 2011] Off-axis axis estimate = 12.22'
[Sat Sep 24 02:14:20 2011] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 02:14:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 02:14:20 2011] Initial guess for spatial extent in simple fitting = 12.54"
[Sat Sep 24 02:14:20 2011] source mask rpix=2.9, npix_max = 45, mask sum = 32, frac = 0.699
[Sat Sep 24 02:14:20 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 12.54"
[Sat Sep 24 02:22:32 2011] fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_src2.ximg exists
[Sat Sep 24 02:22:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_src2.csv
[Sat Sep 24 02:22:32 2011] fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Sep 24 02:22:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_src2.csv
[Sat Sep 24 02:22:32 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 02:22:32 2011] fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Sep 24 02:22:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Sep 24 02:22:32 2011] fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Sep 24 02:22:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Sep 24 02:22:32 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502480401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 02:38:03 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.240452 pixels away
[Sat Sep 24 02:38:03 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 02:38:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 02:38:03 2011] Assessing source extent using major
[Sat Sep 24 02:38:03 2011] Source does appear to be extended
[Sat Sep 24 02:38:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 02:38:10 2011] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 02:38:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 02:38:10 2011] Initial guess for spatial extent in simple fitting = 12.54"
[Sat Sep 24 02:38:10 2011] source mask rpix=2.9, npix_max = 45, mask sum = 32, frac = 0.699
[Sat Sep 24 02:38:10 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 12.54"
[Sat Sep 24 02:45:40 2011] fullrun_pn_xmm0502480401_pi300-10000_cl_pass1_src2.ximg exists
[Sat Sep 24 02:45:40 2011] fullrun_pn_xmm0502480401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Sep 24 02:45:41 2011] Fit fullrun_pn_xmm0502480401_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat Sep 24 02:45:41 2011] fullrun_pn_xmm0502480401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Sep 24 02:45:41 2011] fullrun_pn_xmm0502480401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Sep 24 02:45:41 2011] Fit fullrun_pn_xmm0502480401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Sep 24 02:58:46 2011] Spatial fit model total counts = 665.581000, observed total counts = 669.000000
[Sat Sep 24 02:58:46 2011] Offset between fit and detection position for source 2 = 3.640096 pixels
[Sat Sep 24 02:58:46 2011] 673.400000 total counts/ 455.576000 bgd. counts: snr = 10.205289
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.640096 pixels
  Position = (170.0, 409.7) = 11 55 21.74 -13 50 59.2
  Extent = 13.0 (9.6-17.2)", rotation angle = 0
  Source counts = 217.8 +/- 25.9
  Background counts = 455.6
  Rate = 0.03 +/- 0.003
[Sat Sep 24 02:58:46 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 02:58:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 02:58:46 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 02:58:46 2011] Source does appear to be extended
[Sat Sep 24 02:58:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 02:58:51 2011] XMMSAS src. selection expression = ellipse(14744.409400, 35593.204000, 780.156022, 780.156022, 0.000000, X, Y)
[Sat Sep 24 02:58:51 2011] Writing source region out to fullrun_pn_xmm0502480401_pi300-10000_pass1_cl_src2_src.reg
[Sat Sep 24 02:58:51 2011] Extracting stamp from image fullrun_pn_xmm0502480401_pi300-10000_cl_sm2.00.img.gz, (125, 365) - (215, 455)
[Sat Sep 24 02:58:51 2011] XMMSAS bgd. selection expression = annulus(14744.409400, 35593.204000, 1300.260037, 2600.520075, X, Y)
[Sat Sep 24 02:58:51 2011] Writing fullrun_pn_xmm0502480401_pi300-10000_pass1_cl_src2.gif
[Sat Sep 24 02:59:15 2011] Mean detx,y = (-7000.60, -11964.27) 
[Sat Sep 24 02:59:18 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 02:59:43 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 02:59:44 2011] Setting source spectrum file to fullrun_pn_xmm0502480401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Sep 24 02:59:44 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502480401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Sep 24 03:18:52 2011] Updating aperture counts using extracted products
[Sat Sep 24 03:18:52 2011] Error reading totcts from fullrun_pn_xmm0502480401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Sep 24 03:18:52 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 03:18:52 2011] Using photon index=1.80, rate=0.0256, arf fullrun_pn_xmm0502480401_pi300-10000_pass1_cl_src2.arf
[Sat Sep 24 03:18:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 03:18:52 2011] Updating source flux to 1.9e-13
[Sat Sep 24 03:19:31 2011] Reading fit data from xmm0502480401/analysis//spectral/fullrun_pn_xmm0502480401_pi300-10000_pass1_cl_src2_pl.csv
[Sat Sep 24 03:19:31 2011] Spectral fit parameter nH value = 8.12257e+21
[Sat Sep 24 03:19:31 2011] Spectral fit parameter PhoIndex value = 7.9215
[Sat Sep 24 03:19:31 2011] Failed to get F(0.3-8.0) from xmm0502480401/analysis//spectral/fullrun_pn_xmm0502480401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 03:19:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 03:19:31 2011] Using Nh = 8.1e+21, photon index=7.92, rate=0.0256, arf fullrun_pn_xmm0502480401_pi300-10000_pass1_cl_src2.arf
[Sat Sep 24 03:19:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 03:19:31 2011] Updating source flux to 1.1e-13