[Thu Aug  2 08:07:31 2012] Detection parameters:
  Position = (321.7, 293.9) = 21 31 26.28 47 17 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1457.3 +/- 48.3
  Background counts = 112.8
  Rate = 0.04 +/- 0.001

[Thu Aug  2 08:07:31 2012] Off-axis axis estimate = 1.72'
[Thu Aug  2 08:10:49 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 08:10:49 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Aug  2 08:10:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Aug  2 08:10:49 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.29"
[Thu Aug  2 08:30:30 2012] fullrun_pn_xmm0502460401_pi300-10000_cl_pass0_src4.ximg exists
[Thu Aug  2 08:30:30 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502460401_pi300-10000_cl_pass0_src4.csv
[Thu Aug  2 08:30:30 2012] fullrun_pn_xmm0502460401_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Aug  2 08:30:30 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502460401_pi300-10000_cl_pass0_src4.csv
[Thu Aug  2 08:30:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502460401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502460401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 08:30:30 2012] fullrun_pn_xmm0502460401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Aug  2 08:30:30 2012] fullrun_pn_xmm0502460401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Aug  2 08:30:30 2012] Fit fullrun_pn_xmm0502460401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Aug  2 08:52:47 2012] Spatial fit model total counts = 1508.050000, observed total counts = 1504.000000
[Thu Aug  2 08:52:47 2012] Offset between fit and detection position for source 4 = 0.130707 pixels
[Thu Aug  2 08:52:47 2012] 1520.758000 total counts/ 846.329000 bgd. counts: snr = 23.182839
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.130707 pixels
  Position = (321.6, 294.0) = 21 31 26.33 47 17 26.5
  Extent = 5.6 (5.2-6.3)", rotation angle = 0
  Source counts = 674.4 +/- 39.0
  Background counts = 846.3
  Rate = 0.03 +/- 0.002
[Thu Aug  2 08:52:47 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 08:52:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 08:52:47 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 08:52:47 2012] Source does appear to be extended
[Thu Aug  2 08:52:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 08:52:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 08:52:57 2012] Initial guess for spatial extent in simple fitting = 5.63"
[Thu Aug  2 08:52:57 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.933
[Thu Aug  2 08:52:57 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.63"
[Thu Aug  2 09:09:06 2012] fullrun_pn_xmm0502460401_pi300-10000_cl_pass1_src4.ximg exists
[Thu Aug  2 09:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502460401_pi300-10000_cl_pass1_src4.csv
[Thu Aug  2 09:09:06 2012] fullrun_pn_xmm0502460401_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Aug  2 09:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502460401_pi300-10000_cl_pass1_src4.csv
[Thu Aug  2 09:09:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502460401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502460401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 09:09:06 2012] fullrun_pn_xmm0502460401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Aug  2 09:09:06 2012] fullrun_pn_xmm0502460401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Aug  2 09:09:06 2012] Fit fullrun_pn_xmm0502460401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Aug  2 09:35:10 2012] Spatial fit model total counts = 1503.950000, observed total counts = 1499.000000
[Thu Aug  2 09:35:10 2012] Offset between fit and detection position for source 4 = 0.005356 pixels
[Thu Aug  2 09:35:10 2012] 1514.693000 total counts/ 845.433000 bgd. counts: snr = 23.017347
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.005356 pixels
  Position = (321.6, 294.0) = 21 31 26.33 47 17 26.6
  Extent = 5.6 (5.1-6.2)", rotation angle = 0
  Source counts = 669.3 +/- 38.9
  Background counts = 845.4
  Rate = 0.03 +/- 0.002
[Thu Aug  2 09:35:10 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 09:35:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 09:35:10 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 09:35:10 2012] Source does appear to be extended
[Thu Aug  2 09:35:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 09:35:21 2012] XMMSAS src. selection expression = ellipse(27934.789800, 25529.277400, 336.367210, 336.367210, 0.000000, X, Y)
[Thu Aug  2 09:35:21 2012] Writing source region out to fullrun_pn_xmm0502460401_pi300-10000_pass1_cl_src4_src.reg
[Thu Aug  2 09:35:21 2012] Extracting stamp from image fullrun_pn_xmm0502460401_pi300-10000_cl_sm2.00.img.gz, (302, 275) - (341, 313)
[Thu Aug  2 09:35:21 2012] XMMSAS bgd. selection expression = annulus(27934.789800, 25529.277400, 560.612016, 1121.224032, X, Y)
[Thu Aug  2 09:35:21 2012] Writing fullrun_pn_xmm0502460401_pi300-10000_pass1_cl_src4.gif
[Thu Aug  2 09:37:30 2012] Mean detx,y = (88.12, -230.36) 
[Thu Aug  2 09:37:32 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 09:37:49 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 09:37:50 2012] Setting source spectrum file to fullrun_pn_xmm0502460401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Aug  2 09:37:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502460401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Aug  2 10:22:41 2012] Updating aperture counts using extracted products
[Thu Aug  2 10:22:41 2012] Error reading totcts from fullrun_pn_xmm0502460401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Aug  2 10:22:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 10:22:43 2012] Using photon index=1.80, rate=0.0336, arf fullrun_pn_xmm0502460401_pi300-10000_pass1_cl_src4.arf
[Thu Aug  2 10:22:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 10:22:43 2012] Updating source flux to 1e-13
[Thu Aug  2 10:24:38 2012] Reading fit data from xmm0502460401/analysis//spectral/fullrun_pn_xmm0502460401_pi300-10000_pass1_cl_src4_pl.csv
[Thu Aug  2 10:24:38 2012] Spectral fit parameter nH value = 6.90221e+21
[Thu Aug  2 10:24:38 2012] Spectral fit parameter PhoIndex value = 5.9982
[Thu Aug  2 10:24:38 2012] Failed to get F(0.3-8.0) from xmm0502460401/analysis//spectral/fullrun_pn_xmm0502460401_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 10:24:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 10:24:38 2012] Using Nh = 6.9e+21, photon index=6.00, rate=0.0336, arf fullrun_pn_xmm0502460401_pi300-10000_pass1_cl_src4.arf
[Thu Aug  2 10:24:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 10:24:38 2012] Updating source flux to 6.5e-14