[Sat Jun 8 04:31:27 2013] Detection parameters: Position = (322.4, 303.9) = 21 31 26.04 47 17 23.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2791.6 +/- 65.1 Background counts = 98.6 Rate = 0.06 +/- 0.001 [Sat Jun 8 04:31:28 2013] Off-axis axis estimate = 1.78' [Sat Jun 8 04:35:21 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 04:35:21 2013] Initial guess for spatial extent in simple fitting = 7.32" [Sat Jun 8 04:35:21 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050 [Sat Jun 8 04:35:21 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32" [Sat Jun 8 05:29:06 2013] fullrun_pn_xmm0502460201_pi300-10000_cl_pass0_src1.ximg exists [Sat Jun 8 05:29:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502460201_pi300-10000_cl_pass0_src1.csv [Sat Jun 8 05:29:06 2013] fullrun_pn_xmm0502460201_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Jun 8 05:29:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502460201_pi300-10000_cl_pass0_src1.csv [Sat Jun 8 05:29:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502460201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502460201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 05:29:06 2013] fullrun_pn_xmm0502460201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Jun 8 05:29:06 2013] fullrun_pn_xmm0502460201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Jun 8 05:29:06 2013] Fit fullrun_pn_xmm0502460201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Jun 8 06:04:02 2013] Source 1 is offset by -6.339201 and 5.648192 pixels which is larger than 2 X fitted extent = 0.841306 x 0.841306, not incorporating fit results [Sat Jun 8 06:04:02 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 06:04:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 06:04:02 2013] Assessing source extent using major [Sat Jun 8 06:04:02 2013] Source does appear to be extended [Sat Jun 8 06:04:02 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 06:04:21 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 06:04:21 2013] Initial guess for spatial extent in simple fitting = 7.32" [Sat Jun 8 06:04:21 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050 [Sat Jun 8 06:04:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.32" [Sat Jun 8 07:08:03 2013] fullrun_pn_xmm0502460201_pi300-10000_cl_pass1_src1.ximg exists [Sat Jun 8 07:08:03 2013] fullrun_pn_xmm0502460201_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Jun 8 07:08:03 2013] Fit fullrun_pn_xmm0502460201_pi300-10000_cl_pass1_src1 appears to have run properly [Sat Jun 8 07:08:03 2013] fullrun_pn_xmm0502460201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Jun 8 07:08:03 2013] fullrun_pn_xmm0502460201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Jun 8 07:08:03 2013] Fit fullrun_pn_xmm0502460201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Jun 8 07:40:52 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.060987 pixels away [Sat Jun 8 07:40:52 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 07:40:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 07:40:52 2013] Assessing source extent using major [Sat Jun 8 07:40:52 2013] Source does appear to be extended [Sat Jun 8 07:40:52 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 07:41:04 2013] Counts = 2791.579590, rescaling region sizes by 2.000000 [Sat Jun 8 07:41:04 2013] XMMSAS src. selection expression = ellipse(27999.537476, 26392.344696, 1305.000000, 1305.000000, 0.000000, X, Y) [Sat Jun 8 07:41:04 2013] Writing source region out to fullrun_pn_xmm0502460201_pi300-10000_pass1_cl_src1_src.reg [Sat Jun 8 07:41:04 2013] Extracting stamp from image fullrun_pn_xmm0502460201_pi300-10000_cl_sm2.00.img.gz, (247, 229) - (397, 379) [Sat Jun 8 07:41:04 2013] XMMSAS bgd. selection expression = annulus(27999.537476, 26392.344696, 4350.000000, 8700.000000, X, Y) && !ellipse(19523.971085, 35414.253723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33510.133600, 29860.776600, 385.480811, 385.480811, 0.000000, X, Y) && !ellipse(29443.375768, 25201.421400, 308.687209, 308.687209, 0.000000, X, Y) && !ellipse(35200.534485, 24779.958679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20252.250800, 24566.633360, 539.579216, 364.262410, 91.876994, X, Y) && !ellipse(26265.469200, 23589.203800, 426.538412, 426.538412, 0.000000, X, Y) && !ellipse(32423.801400, 20833.955200, 383.408811, 383.408811, 0.000000, X, Y) && !ellipse(21639.040200, 21068.601400, 386.885611, 386.885611, 0.000000, X, Y) && !ellipse(29396.653717, 19552.549820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35906.413849, 18744.114639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34304.209869, 17276.442322, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 07:41:04 2013] Writing fullrun_pn_xmm0502460201_pi300-10000_pass1_cl_src1.gif [Sat Jun 8 07:41:33 2013] Mean detx,y = (187.57, -220.73) [Sat Jun 8 07:41:42 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 8 07:44:34 2013] Binned source spectrum to 10 counts/bin [Sat Jun 8 07:44:35 2013] Setting source spectrum file to fullrun_pn_xmm0502460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Jun 8 07:44:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502460201_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat Jun 8 08:07:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 08:07:21 2013] rmf not generated due to insufficient counts [Sat Jun 8 09:41:02 2013] Updating aperture counts using extracted products [Sat Jun 8 09:41:02 2013] Total counts from fullrun_pn_xmm0502460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 4547.00 [Sat Jun 8 09:41:02 2013] Total counts from fullrun_pn_xmm0502460201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 57319.00 [Sat Jun 8 09:41:02 2013] Got source and background scale factors 4815162.000000, 151001669.000000 [Sat Jun 8 09:41:02 2013] User source parameters: Position = (322.4, 303.9) = 21 31 26.04 47 17 23.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 2719.2 +/- 68.4 Background aperture counts = 1827.8 Rate = 0.06 +/- 0.001 [Sat Jun 8 09:41:02 2013] Updating counts from extracted products [Sat Jun 8 09:41:02 2013] Set source signif. to 2719.20/42.75 = 63.60 [Sat Jun 8 09:41:08 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 09:41:08 2013] Using photon index=1.80, rate=0.0552, arf fullrun_pn_xmm0502460201_pi300-10000_pass1_cl_src1.arf [Sat Jun 8 09:41:08 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 09:41:08 2013] Updating source flux to 2.1e-13 [Sat Jun 8 09:41:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 09:41:21 2013] xmm0502460201/analysis//spectral/fullrun_pn_xmm0502460201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete