[Sat Jun  8 04:32:07 2013] Detection parameters:
  Position = (331.6, 180.8) = 21 31 22.14 47 8 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.3 +/- 16.0
  Background counts = 55.1
  Rate = 0.003 +/- 0.0005

[Sat Jun  8 04:32:07 2013] Off-axis axis estimate = 8.86'
[Sat Jun  8 05:42:37 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 05:42:37 2013] Initial guess for spatial extent in simple fitting = 10.86"
[Sat Jun  8 05:42:37 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Sat Jun  8 05:42:37 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.86"
[Sat Jun  8 06:03:53 2013] fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun  8 06:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_src5.csv
[Sat Jun  8 06:03:53 2013] fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun  8 06:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_src5.csv
[Sat Jun  8 06:03:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 06:03:53 2013] fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun  8 06:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun  8 06:03:53 2013] fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun  8 06:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun  8 06:03:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502460201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 06:04:08 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.601892 pixels away
[Sat Jun  8 06:04:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 06:04:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 06:04:08 2013] Assessing source extent using major
[Sat Jun  8 06:04:08 2013] Source does appear to be extended
[Sat Jun  8 06:04:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 07:23:21 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 07:23:21 2013] Initial guess for spatial extent in simple fitting = 10.86"
[Sat Jun  8 07:23:21 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Sat Jun  8 07:23:21 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.86"
[Sat Jun  8 07:40:46 2013] fullrun_mos2_xmm0502460201_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun  8 07:40:46 2013] fullrun_mos2_xmm0502460201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun  8 07:40:46 2013] Fit fullrun_mos2_xmm0502460201_pi300-10000_cl_pass1_src5 appears to have run properly
[Sat Jun  8 07:40:46 2013] fullrun_mos2_xmm0502460201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun  8 07:40:46 2013] fullrun_mos2_xmm0502460201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun  8 07:40:46 2013] Fit fullrun_mos2_xmm0502460201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun  8 07:40:56 2013] Spatial fit model total counts = 316.604000, observed total counts = 293.000000
[Sat Jun  8 07:40:56 2013] Offset between fit and detection position for source 12 = 0.140903 pixels
[Sat Jun  8 07:40:56 2013] 311.199100 total counts/ 235.965000 bgd. counts: snr = 4.897686
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.140903 pixels
  Position = (331.7, 180.9) = 21 31 22.10 47 8 28.5
  Extent = 4.6 (3.5-5.7)", rotation angle = 0
  Source counts = 75.2 +/- 17.6
  Background counts = 236.0
  Rate = 0.001 +/- 0.0003
[Sat Jun  8 07:40:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 07:40:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 07:40:56 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 07:40:56 2013] Source does appear to be extended
[Sat Jun  8 07:40:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 09:23:51 2013] XMMSAS src. selection expression = ellipse(28808.839000, 15687.925200, 275.087408, 275.087408, 0.000000, X, Y)
[Sat Jun  8 09:23:51 2013] Writing source region out to fullrun_mos2_xmm0502460201_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun  8 09:23:51 2013] Extracting stamp from image fullrun_mos2_xmm0502460201_pi300-10000_cl_sm2.00.img.gz, (316, 165) - (348, 197)
[Sat Jun  8 09:23:51 2013] XMMSAS bgd. selection expression = annulus(28808.839000, 15687.925200, 458.479013, 916.958026, X, Y)
[Sat Jun  8 09:23:51 2013] Writing fullrun_mos2_xmm0502460201_pi300-10000_pass1_cl_src12.gif
[Sat Jun  8 09:25:44 2013] Mean detx,y = (-7834.22, -7233.39) 
[Sat Jun  8 09:25:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 09:25:58 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 09:25:58 2013] Setting source spectrum file to fullrun_mos2_xmm0502460201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun  8 09:25:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502460201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jun  8 09:37:51 2013] Not generating rmf since there are only 75 counts
[Sat Jun  8 09:37:51 2013] rmf not generated due to insufficient counts
[Sat Jun  8 09:41:11 2013] Updating aperture counts using extracted products
[Sat Jun  8 09:41:11 2013] Total counts from fullrun_mos2_xmm0502460201_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 103.00
[Sat Jun  8 09:41:11 2013] Total counts from fullrun_mos2_xmm0502460201_pi300-10000_pass1_cl_src12_bgd.pi.gz = 187.00
[Sat Jun  8 09:41:11 2013] Got source and background scale factors 235200.000000, 1654840.000000
[Sat Jun  8 09:41:11 2013] User source parameters:
  Position = (331.7, 180.9) = 21 31 22.10 47 8 28.5
  Extent = 4.6 (3.5-5.7)", rotation angle = 0
  Source aperture counts = 76.4 +/- 11.2
  Background aperture counts = 26.6
  Rate = 0.001 +/- 0.0002

[Sat Jun  8 09:41:13 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 09:41:13 2013] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0502460201_pi300-10000_pass1_cl_src12.arf
[Sat Jun  8 09:41:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 09:41:13 2013] Updating source flux to 4.7e-14
[Sat Jun  8 09:41:16 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  8 09:41:18 2013] xmm0502460201/analysis//spectral/fullrun_mos2_xmm0502460201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete