[Wed Aug  1 11:50:57 2012] Detection parameters:
  Position = (334.7, 232.1) = 21 31 19.32 47 11 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1032.4 +/- 39.3
  Background counts = 50.0
  Rate = 0.04 +/- 0.001

[Wed Aug  1 11:50:58 2012] Off-axis axis estimate = 5.48'
[Wed Aug  1 11:55:36 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 11:55:36 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Wed Aug  1 11:55:36 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.103
[Wed Aug  1 11:55:36 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 9.17"
[Wed Aug  1 12:50:12 2012] fullrun_pn_xmm0502460101_pi300-10000_cl_pass0_src8.ximg exists
[Wed Aug  1 12:50:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502460101_pi300-10000_cl_pass0_src8.csv
[Wed Aug  1 12:50:12 2012] fullrun_pn_xmm0502460101_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Aug  1 12:50:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502460101_pi300-10000_cl_pass0_src8.csv
[Wed Aug  1 12:50:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502460101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502460101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 12:50:13 2012] fullrun_pn_xmm0502460101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Aug  1 12:50:13 2012] fullrun_pn_xmm0502460101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Aug  1 12:50:13 2012] Fit fullrun_pn_xmm0502460101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Aug  1 13:50:30 2012] Spatial fit model total counts = 1533.780000, observed total counts = 1394.000000
[Wed Aug  1 13:50:30 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 13:50:30 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 13:50:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 13:50:30 2012] Assessing source extent using major
[Wed Aug  1 13:50:30 2012] Source does appear to be extended
[Wed Aug  1 13:50:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 13:50:51 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 13:50:51 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Wed Aug  1 13:50:51 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.103
[Wed Aug  1 13:50:51 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 9.17"
[Wed Aug  1 14:32:27 2012] fullrun_pn_xmm0502460101_pi300-10000_cl_pass1_src8.ximg exists
[Wed Aug  1 14:32:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502460101_pi300-10000_cl_pass1_src8.csv
[Wed Aug  1 14:32:27 2012] fullrun_pn_xmm0502460101_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Aug  1 14:32:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502460101_pi300-10000_cl_pass1_src8.csv
[Wed Aug  1 14:32:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502460101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502460101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 14:32:27 2012] fullrun_pn_xmm0502460101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Aug  1 14:32:27 2012] fullrun_pn_xmm0502460101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Aug  1 14:32:27 2012] Fit fullrun_pn_xmm0502460101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Aug  1 15:17:04 2012] Spatial fit model total counts = 1533.780000, observed total counts = 1394.000000
[Wed Aug  1 15:17:04 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 15:17:04 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 15:17:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 15:17:04 2012] Assessing source extent using major
[Wed Aug  1 15:17:04 2012] Source does appear to be extended
[Wed Aug  1 15:17:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 15:17:18 2012] Counts = 1032.439575, rescaling region sizes by 2.000000
[Wed Aug  1 15:17:18 2012] XMMSAS src. selection expression = ellipse(29073.406555, 20142.969925, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Aug  1 15:17:18 2012] Writing source region out to fullrun_pn_xmm0502460101_pi300-10000_pass1_cl_src9_src.reg
[Wed Aug  1 15:17:18 2012] Extracting stamp from image fullrun_pn_xmm0502460101_pi300-10000_cl_sm2.00.img.gz, (260, 157) - (410, 307)
[Wed Aug  1 15:17:18 2012] XMMSAS bgd. selection expression = annulus(29073.406555, 20142.969925, 4350.000000, 8700.000000, X, Y) && !ellipse(27658.980600, 26961.166400, 483.535214, 483.535214, 0.000000, X, Y) && !ellipse(25963.012700, 24141.870200, 463.626413, 463.626413, 0.000000, X, Y) && !ellipse(21260.862045, 21592.868149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33981.435303, 17832.212967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30988.845581, 17812.557785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29904.953800, 27758.198200, 536.674415, 536.674415, 0.000000, X, Y) && !ellipse(21351.068360, 25850.427400, 579.359217, 579.359217, 0.000000, X, Y) && !ellipse(29111.002040, 25783.603400, 453.919213, 453.919213, 0.000000, X, Y) && !ellipse(22832.861084, 15371.195953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34854.870911, 25381.681244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19942.760000, 25111.765400, 440.684813, 265.239208, 46.627882, X, Y) && !ellipse(38466.690460, 21633.401154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35588.967926, 19332.838181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28499.718445, 16194.532486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31839.665649, 13449.614517, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 15:17:18 2012] Writing fullrun_pn_xmm0502460101_pi300-10000_pass1_cl_src9.gif
[Wed Aug  1 15:24:14 2012] Mean detx,y = (4148.98, 5549.18) 
[Wed Aug  1 15:24:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 15:27:59 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 15:27:59 2012] Setting source spectrum file to fullrun_pn_xmm0502460101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Aug  1 15:27:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502460101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Aug  1 15:59:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  1 15:59:11 2012] rmf not generated due to insufficient counts
[Wed Aug  1 16:29:41 2012] Updating aperture counts using extracted products
[Wed Aug  1 16:29:41 2012] Error reading totcts from fullrun_pn_xmm0502460101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Aug  1 16:29:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 16:29:41 2012] Using photon index=1.80, rate=0.0387, arf fullrun_pn_xmm0502460101_pi300-10000_pass1_cl_src9.arf
[Wed Aug  1 16:29:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 16:29:41 2012] Updating source flux to 1.3e-13
[Wed Aug  1 16:30:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting