[Wed Aug  1 11:51:37 2012] Detection parameters:
  Position = (442.8, 249.4) = 21 30 33.19 47 12 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.6 +/- 10.0
  Background counts = 18.1
  Rate = 0.002 +/- 0.0005

[Wed Aug  1 11:51:37 2012] Off-axis axis estimate = 11.05'
[Wed Aug  1 12:50:14 2012] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 12:50:14 2012] Initial guess for spatial extent in simple fitting = 11.95"
[Wed Aug  1 12:50:14 2012] source mask rpix=2.7, npix_max = 42, mask sum = 41, frac = 0.972
[Wed Aug  1 12:50:14 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.95"
[Wed Aug  1 13:16:00 2012] fullrun_mos1_xmm0502460101_pi300-10000_cl_pass0_src9.ximg exists
[Wed Aug  1 13:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502460101_pi300-10000_cl_pass0_src9.csv
[Wed Aug  1 13:16:00 2012] fullrun_mos1_xmm0502460101_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Aug  1 13:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502460101_pi300-10000_cl_pass0_src9.csv
[Wed Aug  1 13:16:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502460101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502460101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 13:16:00 2012] fullrun_mos1_xmm0502460101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Aug  1 13:16:00 2012] fullrun_mos1_xmm0502460101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Aug  1 13:16:00 2012] Fit fullrun_mos1_xmm0502460101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Aug  1 13:50:34 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 16.162900 pixels away
[Wed Aug  1 13:50:34 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 13:50:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 13:50:34 2012] Assessing source extent using major
[Wed Aug  1 13:50:34 2012] Source does appear to be extended
[Wed Aug  1 13:50:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 14:32:27 2012] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 14:32:27 2012] Initial guess for spatial extent in simple fitting = 11.95"
[Wed Aug  1 14:32:27 2012] source mask rpix=2.7, npix_max = 42, mask sum = 41, frac = 0.972
[Wed Aug  1 14:32:27 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.95"
[Wed Aug  1 14:54:14 2012] fullrun_mos1_xmm0502460101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Aug  1 14:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502460101_pi300-10000_cl_pass1_src9.csv
[Wed Aug  1 14:54:14 2012] fullrun_mos1_xmm0502460101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Aug  1 14:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502460101_pi300-10000_cl_pass1_src9.csv
[Wed Aug  1 14:54:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502460101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502460101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 14:54:14 2012] fullrun_mos1_xmm0502460101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Aug  1 14:54:14 2012] fullrun_mos1_xmm0502460101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Aug  1 14:54:14 2012] Fit fullrun_mos1_xmm0502460101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Aug  1 15:17:07 2012] Spatial fit model total counts = 247.924000, observed total counts = 251.000000
[Wed Aug  1 15:17:07 2012] Offset between fit and detection position for source 15 = 0.604425 pixels
[Wed Aug  1 15:17:07 2012] 242.358000 total counts/ 209.008000 bgd. counts: snr = 2.306824
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.604425 pixels
  Position = (443.4, 249.5) = 21 30 32.93 47 12 57.9
  Extent = 6.6 (3.0-11.6)", rotation angle = 0
  Source counts = 33.4 +/- 15.6
  Background counts = 209.0
  Rate = 0.0008 +/- 0.0004
[Wed Aug  1 15:17:07 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 15:17:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 15:17:07 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 15:17:07 2012] Source does appear to be extended
[Wed Aug  1 15:17:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 16:04:34 2012] XMMSAS src. selection expression = ellipse(38524.207600, 21658.358800, 395.332352, 395.332352, 0.000000, X, Y)
[Wed Aug  1 16:04:34 2012] Writing source region out to fullrun_mos1_xmm0502460101_pi300-10000_pass1_cl_src15_src.reg
[Wed Aug  1 16:04:34 2012] Extracting stamp from image fullrun_mos1_xmm0502460101_pi300-10000_cl_sm2.00.img.gz, (421, 227) - (466, 272)
[Wed Aug  1 16:04:34 2012] XMMSAS bgd. selection expression = annulus(38524.207600, 21658.358800, 658.887253, 1317.774506, X, Y)
[Wed Aug  1 16:04:34 2012] Writing fullrun_mos1_xmm0502460101_pi300-10000_pass1_cl_src15.gif
[Wed Aug  1 16:06:42 2012] Mean detx,y = (-333.17, 11903.43) 
[Wed Aug  1 16:06:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 16:06:57 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 16:06:57 2012] Setting source spectrum file to fullrun_mos1_xmm0502460101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Aug  1 16:06:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502460101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Aug  1 16:13:16 2012] Not generating rmf since there are only 33 counts
[Wed Aug  1 16:13:16 2012] rmf not generated due to insufficient counts
[Wed Aug  1 16:29:42 2012] Updating aperture counts using extracted products
[Wed Aug  1 16:29:42 2012] Error reading totcts from fullrun_mos1_xmm0502460101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Aug  1 16:29:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 16:29:42 2012] Using photon index=1.80, rate=0.000802, arf fullrun_mos1_xmm0502460101_pi300-10000_pass1_cl_src15.arf
[Wed Aug  1 16:29:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 16:29:42 2012] Updating source flux to 1.7e-14
[Wed Aug  1 16:29:44 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting