[Fri Jul 13 17:55:42 2012] Detection parameters:
  Position = (207.3, 282.9) = 9 58 47.37 65 33 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7438.0 +/- 103.0
  Background counts = 35.7
  Rate = 1 +/- 0.01

[Fri Jul 13 17:55:42 2012] Off-axis axis estimate = 6.70'
[Fri Jul 13 17:57:24 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 17:57:24 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Jul 13 17:57:24 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.993
[Fri Jul 13 17:57:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.78"
[Fri Jul 13 18:20:31 2012] fullrun_pn_xmm0502430701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 18:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430701_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 18:20:31 2012] fullrun_pn_xmm0502430701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 18:20:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430701_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 18:20:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 18:20:32 2012] fullrun_pn_xmm0502430701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 18:20:32 2012] fullrun_pn_xmm0502430701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 18:20:32 2012] Fit fullrun_pn_xmm0502430701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 18:52:34 2012] Spatial fit model total counts = 4499.790000, observed total counts = 4505.000000
[Fri Jul 13 18:52:34 2012] Offset between fit and detection position for source 1 = 0.151544 pixels
[Fri Jul 13 18:52:34 2012] 4522.385000 total counts/ 994.935000 bgd. counts: snr = 111.831336
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.151544 pixels
  Position = (207.3, 282.7) = 9 58 47.40 65 33 53.5
  Extent = 6.0 (5.8-6.1)", rotation angle = 0
  Source counts = 3527.4 +/- 67.2
  Background counts = 994.9
  Rate = 0.5 +/- 0.009
[Fri Jul 13 18:52:34 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 18:52:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 18:52:34 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 18:52:34 2012] Source does appear to be extended
[Fri Jul 13 18:52:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 18:52:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 18:52:44 2012] Initial guess for spatial extent in simple fitting = 5.96"
[Fri Jul 13 18:52:44 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.145
[Fri Jul 13 18:52:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.96"
[Fri Jul 13 19:16:39 2012] fullrun_pn_xmm0502430701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 19:16:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430701_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 19:16:39 2012] fullrun_pn_xmm0502430701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 19:16:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430701_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 19:16:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 19:16:40 2012] fullrun_pn_xmm0502430701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 19:16:40 2012] fullrun_pn_xmm0502430701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 19:16:40 2012] Fit fullrun_pn_xmm0502430701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 19:44:34 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Fri Jul 13 19:44:34 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 19:44:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 19:44:34 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 19:44:34 2012] Source does appear to be extended
[Fri Jul 13 19:44:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 19:44:44 2012] Counts = 3527.450000, rescaling region sizes by 2.000000
[Fri Jul 13 19:44:44 2012] XMMSAS src. selection expression = ellipse(17982.873400, 24549.516600, 714.649221, 714.649221, 0.000000, X, Y)
[Fri Jul 13 19:44:44 2012] Writing source region out to fullrun_pn_xmm0502430701_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 13 19:44:44 2012] Extracting stamp from image fullrun_pn_xmm0502430701_pi300-10000_cl_sm2.00.img.gz, (166, 242) - (248, 324)
[Fri Jul 13 19:44:44 2012] XMMSAS bgd. selection expression = annulus(17982.873400, 24549.516600, 2382.164069, 4764.328137, X, Y) && !ellipse(16432.089905, 27427.322906, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 19:44:44 2012] Writing fullrun_pn_xmm0502430701_pi300-10000_pass1_cl_src1.gif
[Fri Jul 13 19:44:48 2012] Mean detx,y = (6335.07, 4638.83) 
[Fri Jul 13 19:44:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 19:46:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 19:46:05 2012] Setting source spectrum file to fullrun_pn_xmm0502430701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 19:46:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502430701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 13 20:26:09 2012] Updating aperture counts using extracted products
[Fri Jul 13 20:26:09 2012] Error reading totcts from fullrun_pn_xmm0502430701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 20:26:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 20:26:09 2012] Using photon index=1.80, rate=0.495, arf fullrun_pn_xmm0502430701_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 20:26:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 20:26:09 2012] Updating source flux to 1.7e-12
[Fri Jul 13 20:27:01 2012] Reading fit data from xmm0502430701/analysis//spectral/fullrun_pn_xmm0502430701_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 13 20:27:01 2012] Spectral fit parameter nH value = 1.01274e+21
[Fri Jul 13 20:27:01 2012] Spectral fit parameter PhoIndex value = 2.00469
[Fri Jul 13 20:27:01 2012] Failed to get F(0.3-8.0) from xmm0502430701/analysis//spectral/fullrun_pn_xmm0502430701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 13 20:27:01 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 20:27:01 2012] Using Nh = 1e+21, photon index=2.00, rate=0.495, arf fullrun_pn_xmm0502430701_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 20:27:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 20:27:01 2012] Updating source flux to 1.9e-12