[Fri Jul 13 17:56:00 2012] Detection parameters:
  Position = (287.1, 290.0) = 9 57 51.43 65 34 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.3 +/- 16.1
  Background counts = 12.1
  Rate = 0.01 +/- 0.001

[Fri Jul 13 17:56:00 2012] Off-axis axis estimate = 1.03'
[Fri Jul 13 18:20:32 2012] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 18:20:32 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Fri Jul 13 18:20:32 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.911
[Fri Jul 13 18:20:32 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.94"
[Fri Jul 13 18:32:52 2012] fullrun_mos1_xmm0502430701_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 13 18:32:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502430701_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 18:32:52 2012] fullrun_mos1_xmm0502430701_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 13 18:32:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502430701_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 18:32:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502430701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502430701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 18:32:52 2012] fullrun_mos1_xmm0502430701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 13 18:32:52 2012] fullrun_mos1_xmm0502430701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 13 18:32:52 2012] Fit fullrun_mos1_xmm0502430701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 13 18:52:35 2012] Spatial fit model total counts = 307.997000, observed total counts = 308.000000
[Fri Jul 13 18:52:35 2012] Offset between fit and detection position for source 4 = 0.101473 pixels
[Fri Jul 13 18:52:35 2012] 309.311000 total counts/ 201.765000 bgd. counts: snr = 7.571316
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.101473 pixels
  Position = (287.0, 289.9) = 9 57 51.48 65 34 25.4
  Extent = 6.5 (5.3-8.4)", rotation angle = 0
  Source counts = 107.5 +/- 17.6
  Background counts = 201.8
  Rate = 0.006 +/- 0.001
[Fri Jul 13 18:52:35 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 18:52:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 18:52:35 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 18:52:35 2012] Source does appear to be extended
[Fri Jul 13 18:52:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 19:16:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 19:16:40 2012] Initial guess for spatial extent in simple fitting = 6.48"
[Fri Jul 13 19:16:40 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.011
[Fri Jul 13 19:16:40 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.48"
[Fri Jul 13 19:27:42 2012] fullrun_mos1_xmm0502430701_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 13 19:27:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502430701_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 19:27:42 2012] fullrun_mos1_xmm0502430701_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 13 19:27:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502430701_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 19:27:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502430701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502430701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 19:27:42 2012] fullrun_mos1_xmm0502430701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 13 19:27:42 2012] fullrun_mos1_xmm0502430701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 13 19:27:42 2012] Fit fullrun_mos1_xmm0502430701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 13 19:44:36 2012] Spatial fit model total counts = 307.989000, observed total counts = 308.000000
[Fri Jul 13 19:44:36 2012] Offset between fit and detection position for source 4 = 0.005735 pixels
[Fri Jul 13 19:44:36 2012] 309.870000 total counts/ 202.981000 bgd. counts: snr = 7.502488
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.005735 pixels
  Position = (287.0, 289.9) = 9 57 51.48 65 34 25.4
  Extent = 6.4 (5.3-8.4)", rotation angle = 0
  Source counts = 106.9 +/- 17.6
  Background counts = 203.0
  Rate = 0.006 +/- 0.001
[Fri Jul 13 19:44:36 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 19:44:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 19:44:36 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 19:44:36 2012] Source does appear to be extended
[Fri Jul 13 19:44:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:02:22 2012] XMMSAS src. selection expression = ellipse(24923.195580, 25172.721400, 386.154611, 386.154611, 0.000000, X, Y)
[Fri Jul 13 20:02:22 2012] Writing source region out to fullrun_mos1_xmm0502430701_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 13 20:02:22 2012] Extracting stamp from image fullrun_mos1_xmm0502430701_pi300-10000_cl_sm2.00.img.gz, (265, 268) - (309, 312)
[Fri Jul 13 20:02:22 2012] XMMSAS bgd. selection expression = annulus(24923.195580, 25172.721400, 643.591019, 1287.182037, X, Y)
[Fri Jul 13 20:02:22 2012] Writing fullrun_mos1_xmm0502430701_pi300-10000_pass1_cl_src4.gif
[Fri Jul 13 20:03:40 2012] Mean detx,y = (-1322.45, -128.32) 
[Fri Jul 13 20:03:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 20:03:47 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 20:03:48 2012] Setting source spectrum file to fullrun_mos1_xmm0502430701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 13 20:03:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502430701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 13 20:26:09 2012] Updating aperture counts using extracted products
[Fri Jul 13 20:26:09 2012] Error reading totcts from fullrun_mos1_xmm0502430701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 13 20:26:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 20:26:09 2012] Using photon index=1.80, rate=0.00636, arf fullrun_mos1_xmm0502430701_pi300-10000_pass1_cl_src4.arf
[Fri Jul 13 20:26:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 20:26:09 2012] Updating source flux to 7e-14