[Sun Jun 23 06:35:16 2013] Detection parameters:
  Position = (224.5, 309.2) = 12 6 30.91 -8 46 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1264.9 +/- 43.1
  Background counts = 32.8
  Rate = 0.08 +/- 0.003

[Sun Jun 23 06:35:18 2013] Off-axis axis estimate = 5.41'
[Sun Jun 23 06:37:47 2013] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:37:47 2013] Initial guess for spatial extent in simple fitting = 9.14"
[Sun Jun 23 06:37:47 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.925
[Sun Jun 23 06:37:47 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.14"
[Sun Jun 23 08:10:18 2013] fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun 23 08:10:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_src2.csv
[Sun Jun 23 08:10:18 2013] fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun 23 08:10:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_src2.csv
[Sun Jun 23 08:10:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:10:19 2013] fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun 23 08:10:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 23 08:10:19 2013] fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun 23 08:10:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 23 08:10:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:27:51 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.121015 pixels away
[Sun Jun 23 10:27:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:27:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:27:51 2013] Assessing source extent using major
[Sun Jun 23 10:27:51 2013] Source does appear to be extended
[Sun Jun 23 10:27:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:28:13 2013] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:28:13 2013] Initial guess for spatial extent in simple fitting = 9.14"
[Sun Jun 23 10:28:13 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.925
[Sun Jun 23 10:28:13 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 9.14"
[Sun Jun 23 11:19:18 2013] fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 23 11:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_src2.csv
[Sun Jun 23 11:19:18 2013] fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 23 11:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_src2.csv
[Sun Jun 23 11:19:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:19:18 2013] fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 23 11:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 23 11:19:18 2013] fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 23 11:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 23 11:19:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:28:00 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.121015 pixels away
[Sun Jun 23 13:28:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 13:28:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 13:28:00 2013] Assessing source extent using major
[Sun Jun 23 13:28:00 2013] Source does appear to be extended
[Sun Jun 23 13:28:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:28:17 2013] Counts = 1264.866089, rescaling region sizes by 2.000000
[Sun Jun 23 13:28:17 2013] XMMSAS src. selection expression = ellipse(19487.001129, 26849.131866, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 23 13:28:17 2013] Writing source region out to fullrun_pn_xmm0502430401_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 23 13:28:17 2013] Extracting stamp from image fullrun_pn_xmm0502430401_pi300-10000_cl_sm2.00.img.gz, (150, 234) - (300, 384)
[Sun Jun 23 13:28:17 2013] XMMSAS bgd. selection expression = annulus(19487.001129, 26849.131866, 4350.000000, 8700.000000, X, Y) && !ellipse(24983.424400, 25372.909400, 5144.424148, 3812.328110, 326.654461, X, Y) && !ellipse(12941.483063, 33161.073730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13070.344910, 31401.251282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20971.573600, 30616.358400, 562.811216, 434.360812, 320.457703, X, Y) && !ellipse(15885.773819, 30256.139801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24097.294000, 28023.994000, 1160.992033, 1160.992033, 0.000000, X, Y) && !ellipse(26088.082000, 27778.574000, 1119.704032, 1119.704032, 0.000000, X, Y) && !ellipse(22750.624000, 26773.328000, 1205.456035, 1205.456035, 0.000000, X, Y) && !ellipse(23279.357361, 26216.040131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18045.389252, 26325.472473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27086.077301, 24659.178741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16447.619171, 24311.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26314.159393, 23676.998444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.712738, 23297.759369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26956.696000, 21073.498360, 480.740814, 480.740814, 0.000000, X, Y) && !ellipse(27783.249600, 20553.098440, 409.866412, 293.285608, 0.235254, X, Y) && !ellipse(13612.804565, 17695.755081, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 13:28:17 2013] Writing fullrun_pn_xmm0502430401_pi300-10000_pass1_cl_src2.gif
[Sun Jun 23 13:33:07 2013] Mean detx,y = (4353.35, 5098.78) 
[Sun Jun 23 13:33:11 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 13:36:24 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 13:36:24 2013] Setting source spectrum file to fullrun_pn_xmm0502430401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 23 13:36:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502430401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 23 13:59:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 13:59:37 2013] rmf not generated due to insufficient counts
[Sun Jun 23 17:39:39 2013] Updating aperture counts using extracted products
[Sun Jun 23 17:39:39 2013] Total counts from fullrun_pn_xmm0502430401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1882.00
[Sun Jun 23 17:39:40 2013] Total counts from fullrun_pn_xmm0502430401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 17761.00
[Sun Jun 23 17:39:40 2013] Got source and background scale factors 4062289.000000, 121328655.000000
[Sun Jun 23 17:39:40 2013] User source parameters:
  Position = (224.5, 309.2) = 12 6 30.91 -8 46 48.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1287.3 +/- 44.4
  Background aperture counts = 594.7
  Rate = 0.05 +/- 0.002

[Sun Jun 23 17:39:40 2013] Updating counts from extracted products
[Sun Jun 23 17:39:40 2013] Set source signif. to 1287.33/24.39 = 52.79
[Sun Jun 23 17:39:45 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 17:39:45 2013] Using photon index=1.80, rate=0.05, arf fullrun_pn_xmm0502430401_pi300-10000_pass1_cl_src2.arf
[Sun Jun 23 17:39:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 17:39:45 2013] Updating source flux to 1.7e-13
[Sun Jun 23 17:40:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 17:40:10 2013] xmm0502430401/analysis//spectral/fullrun_pn_xmm0502430401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete