[Sun Jun 23 06:36:10 2013] Detection parameters:
  Position = (114.3, 266.8) = 12 7 3.26 -8 49 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.8 +/- 17.7
  Background counts = 9.3
  Rate = 0.007 +/- 0.0006

[Sun Jun 23 06:36:13 2013] Off-axis axis estimate = 13.54'
[Sun Jun 23 09:10:10 2013] Using EEF radius (= 13.20 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:10:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 09:10:10 2013] Initial guess for spatial extent in simple fitting = 13.20"
[Sun Jun 23 09:10:10 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.981
[Sun Jun 23 09:10:10 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.20"
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src6.csv
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src6.csv
[Sun Jun 23 10:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 23 10:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:28:03 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.809082 pixels away
[Sun Jun 23 10:28:03 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:28:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:28:03 2013] Assessing source extent using major
[Sun Jun 23 10:28:03 2013] Source does appear to be extended
[Sun Jun 23 10:28:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:02:08 2013] Using EEF radius (= 13.20 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:02:08 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 12:02:08 2013] Initial guess for spatial extent in simple fitting = 13.20"
[Sun Jun 23 12:02:08 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.981
[Sun Jun 23 12:02:08 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 13.20"
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun 23 13:27:52 2013] Fit fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun 23 13:27:53 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun 23 13:27:53 2013] Fit fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Jun 23 13:28:08 2013] Spatial fit model total counts = 340.776000, observed total counts = 314.000000
[Sun Jun 23 13:28:08 2013] Offset between fit and detection position for source 4 = 0.398372 pixels
[Sun Jun 23 13:28:08 2013] 344.669000 total counts/ 206.921000 bgd. counts: snr = 9.575975
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.398372 pixels
  Position = (114.5, 266.5) = 12 7 3.22 -8 49 55.4
  Extent = 7.7 (6.4-9.7)", rotation angle = 91 (79-101) degrees
  Source counts = 137.7 +/- 18.6
  Background counts = 206.9
  Rate = 0.005 +/- 0.0006
[Sun Jun 23 13:28:08 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 13:28:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 13:28:08 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 13:28:08 2013] Source does appear to be extended
[Sun Jun 23 13:28:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.65
[Sun Jun 23 13:28:08 2013] Source is asymmetric
[Sun Jun 23 14:53:21 2013] XMMSAS src. selection expression = ellipse(9911.796200, 23133.715800, 461.566213, 197.998206, 91.399806, X, Y)
[Sun Jun 23 14:53:21 2013] Writing source region out to fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 23 14:53:21 2013] Extracting stamp from image fullrun_mos2_xmm0502430401_pi300-10000_cl_sm2.00.img.gz, (88, 240) - (141, 293)
[Sun Jun 23 14:53:21 2013] XMMSAS bgd. selection expression = annulus(9911.796200, 23133.715800, 769.277022, 1538.554044, X, Y)
[Sun Jun 23 14:53:21 2013] Writing fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src4.gif
[Sun Jun 23 14:57:54 2013] Mean detx,y = (-14457.84, -5992.21) 
[Sun Jun 23 14:57:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:58:09 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:58:09 2013] Setting source spectrum file to fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 23 14:58:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 23 17:39:49 2013] Updating aperture counts using extracted products
[Sun Jun 23 17:39:49 2013] Total counts from fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 164.00
[Sun Jun 23 17:39:49 2013] Total counts from fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 208.00
[Sun Jun 23 17:39:49 2013] Got source and background scale factors 286400.000000, 3761988.000000
[Sun Jun 23 17:39:49 2013] User source parameters:
  Position = (114.5, 266.5) = 12 7 3.22 -8 49 55.4
  Extent = 7.7 (6.4-9.7)", rotation angle = 91 (79-101) degrees
  Source aperture counts = 148.2 +/- 13.8
  Background aperture counts = 15.8
  Rate = 0.005 +/- 0.0005

[Sun Jun 23 17:39:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 17:39:53 2013] Using photon index=1.80, rate=0.00465, arf fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src4.arf
[Sun Jun 23 17:39:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 17:39:53 2013] Updating source flux to 1.7e-13
[Sun Jun 23 17:40:04 2013] xmm0502430401/analysis//spectral/fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete