[Sun Jun 23 06:36:10 2013] Detection parameters:
  Position = (278.4, 286.7) = 12 6 15.10 -8 48 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 492.6 +/- 28.5
  Background counts = 27.0
  Rate = 0.02 +/- 0.001

[Sun Jun 23 06:36:13 2013] Off-axis axis estimate = 1.68'
[Sun Jun 23 09:10:10 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:10:10 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Jun 23 09:10:10 2013] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.955
[Sun Jun 23 09:10:10 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.27"
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src4.csv
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src4.csv
[Sun Jun 23 10:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 23 10:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:28:03 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Sun Jun 23 10:28:03 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:28:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:28:03 2013] Assessing source extent using major
[Sun Jun 23 10:28:03 2013] Source does appear to be extended
[Sun Jun 23 10:28:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:28:03 2013] Source is confused with source 30
[Sun Jun 23 12:02:08 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:02:08 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Jun 23 12:02:08 2013] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.955
[Sun Jun 23 12:02:08 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.27"
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun 23 13:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src4.csv
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun 23 13:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src4.csv
[Sun Jun 23 13:27:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun 23 13:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun 23 13:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 23 13:27:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:28:08 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Sun Jun 23 13:28:08 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 13:28:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 13:28:08 2013] Assessing source extent using major
[Sun Jun 23 13:28:08 2013] Source does appear to be extended
[Sun Jun 23 13:28:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:53:21 2013] XMMSAS src. selection expression = ellipse(24174.935913, 24898.436707, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 14:53:21 2013] Writing source region out to fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 23 14:53:21 2013] Extracting stamp from image fullrun_mos2_xmm0502430401_pi300-10000_cl_sm2.00.img.gz, (241, 249) - (316, 324)
[Sun Jun 23 14:53:21 2013] XMMSAS bgd. selection expression = annulus(24174.935913, 24898.436707, 1087.500000, 2175.000000, X, Y) && !ellipse(25093.791107, 25434.187103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23682.956329, 25933.590149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24063.724701, 26483.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24507.743835, 27075.194336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24403.004000, 24254.114000, 2354.072068, 2354.072068, 0.000000, X, Y) && !ellipse(25709.433990, 23903.953003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26173.024000, 24853.512000, 1131.840033, 1131.840033, 0.000000, X, Y) && !ellipse(23616.430000, 23204.914000, 1216.136035, 1216.136035, 0.000000, X, Y) && !ellipse(26967.596000, 24094.296000, 2284.464066, 2284.464066, 0.000000, X, Y) && !ellipse(22955.095978, 25710.572998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.095886, 26633.506317, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 14:53:21 2013] Writing fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src3.gif
[Sun Jun 23 14:57:17 2013] Mean detx,y = (-654.56, -1447.70) 
[Sun Jun 23 14:57:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:57:27 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:57:27 2013] Setting source spectrum file to fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 23 14:57:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 23 15:23:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 15:23:37 2013] rmf not generated due to insufficient counts
[Sun Jun 23 17:39:49 2013] Updating aperture counts using extracted products
[Sun Jun 23 17:39:49 2013] Total counts from fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 2096.00
[Sun Jun 23 17:39:49 2013] Total counts from fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 161.00
[Sun Jun 23 17:39:49 2013] Got source and background scale factors 1154352.000000, 368000.000000
[Sun Jun 23 17:39:49 2013] User source parameters:
  Position = (278.4, 286.7) = 12 6 15.10 -8 48 22.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1591.0 +/- 46.8
  Background aperture counts = 505.0
  Rate = 0.05 +/- 0.002

[Sun Jun 23 17:39:49 2013] Updating counts from extracted products
[Sun Jun 23 17:39:49 2013] Set source signif. to 1590.97/22.47 = 70.80
[Sun Jun 23 17:39:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 17:39:53 2013] Using photon index=1.80, rate=0.0537, arf fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src3.arf
[Sun Jun 23 17:39:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 17:39:53 2013] Updating source flux to 6.3e-13
[Sun Jun 23 17:39:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 17:40:04 2013] xmm0502430401/analysis//spectral/fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete