[Sun Jun 23 06:36:10 2013] Detection parameters:
  Position = (289.0, 292.9) = 12 6 12.00 -8 48 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3373.4 +/- 70.7
  Background counts = 26.5
  Rate = 0.1 +/- 0.002

[Sun Jun 23 06:36:13 2013] Off-axis axis estimate = 0.79'
[Sun Jun 23 09:10:10 2013] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:10:10 2013] Initial guess for spatial extent in simple fitting = 6.83"
[Sun Jun 23 09:10:10 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.934
[Sun Jun 23 09:10:10 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 6.83"
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src1.csv
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src1.csv
[Sun Jun 23 10:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 23 10:27:40 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 23 10:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 23 10:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:28:03 2013] Spatial fit model total counts = 53196.500000, observed total counts = 7608.000000
[Sun Jun 23 10:28:03 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 10:28:03 2013] Spatial fit model total counts = 3681.960000, observed total counts = 2883.000000
[Sun Jun 23 10:28:03 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 10:28:03 2013] Source 1 is offset by 5.387967 and -5.442148 pixels which is larger than
2 X fitted extent = 1.015007 x 3.816304, not incorporating fit results
[Sun Jun 23 10:28:03 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:28:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:28:03 2013] Assessing source extent using major
[Sun Jun 23 10:28:03 2013] Source does appear to be extended
[Sun Jun 23 10:28:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:02:08 2013] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:02:08 2013] Initial guess for spatial extent in simple fitting = 6.83"
[Sun Jun 23 12:02:08 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.934
[Sun Jun 23 12:02:08 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.83"
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 23 13:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 23 13:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 13:27:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 23 13:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 23 13:27:52 2013] fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 23 13:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 23 13:27:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:28:08 2013] Spatial fit model total counts = 51984.400000, observed total counts = 7608.000000
[Sun Jun 23 13:28:08 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 13:28:08 2013] Spatial fit model total counts = 3679.640000, observed total counts = 2883.000000
[Sun Jun 23 13:28:08 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 13:28:08 2013] Source 1 is offset by 5.424036 and -5.442148 pixels which is larger than
2 X fitted extent = 0.831674 x 3.972051, not incorporating fit results
[Sun Jun 23 13:28:08 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 13:28:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 13:28:08 2013] Assessing source extent using major
[Sun Jun 23 13:28:08 2013] Source does appear to be extended
[Sun Jun 23 13:28:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:28:08 2013] Source is confused with source 30
[Sun Jun 23 14:53:20 2013] Counts = 3373.446289, rescaling region sizes by 2.000000
[Sun Jun 23 14:53:20 2013] XMMSAS src. selection expression = ellipse(25093.791107, 25434.187103, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 23 14:53:20 2013] Writing source region out to fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 23 14:53:20 2013] Extracting stamp from image fullrun_mos2_xmm0502430401_pi300-10000_cl_sm2.00.img.gz, (214, 218) - (364, 368)
[Sun Jun 23 14:53:21 2013] XMMSAS bgd. selection expression = annulus(25093.791107, 25434.187103, 4350.000000, 8700.000000, X, Y) && !ellipse(19495.896200, 26862.690600, 422.486412, 422.486412, 0.000000, X, Y) && !ellipse(32064.004180, 20664.994600, 490.613614, 370.632011, 333.179472, X, Y) && !ellipse(24174.935913, 24898.436707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18051.404780, 26356.187600, 457.910413, 457.910413, 0.000000, X, Y) && !ellipse(23682.956329, 25933.590149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20006.550600, 16668.844200, 518.580015, 257.489607, 196.272536, X, Y) && !ellipse(24063.724701, 26483.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27813.345800, 20568.203600, 569.617616, 277.009608, 332.696100, X, Y) && !ellipse(24507.743835, 27075.194336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24403.004000, 24254.114000, 2354.072068, 2354.072068, 0.000000, X, Y) && !ellipse(16420.300800, 24333.098800, 499.320014, 248.211207, 352.034114, X, Y) && !ellipse(26941.279968, 21079.009796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.433990, 23903.953003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26173.024000, 24853.512000, 1131.840033, 1131.840033, 0.000000, X, Y) && !ellipse(20931.854640, 30639.993200, 639.909618, 261.226408, 319.819229, X, Y) && !ellipse(23566.536800, 17725.708600, 436.077613, 181.740005, 22.212265, X, Y) && !ellipse(23616.430000, 23204.914000, 1216.136035, 1216.136035, 0.000000, X, Y) && !ellipse(26967.596000, 24094.296000, 2284.464066, 2284.464066, 0.000000, X, Y) && !ellipse(22955.095978, 25710.572998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.095886, 26633.506317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29150.512200, 26323.288600, 603.109617, 603.109617, 0.000000, X, Y) && !ellipse(27282.597260, 24813.499664, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 14:53:21 2013] Writing fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src1.gif
[Sun Jun 23 14:53:27 2013] Mean detx,y = (189.56, -1512.55) 
[Sun Jun 23 14:53:30 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:56:46 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:56:46 2013] Setting source spectrum file to fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 23 14:56:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 23 15:15:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 15:15:59 2013] rmf not generated due to insufficient counts
[Sun Jun 23 17:39:49 2013] Updating aperture counts using extracted products
[Sun Jun 23 17:39:49 2013] Total counts from fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 11299.00
[Sun Jun 23 17:39:49 2013] Total counts from fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 10250.00
[Sun Jun 23 17:39:49 2013] Got source and background scale factors 5056384.000000, 159745835.000000
[Sun Jun 23 17:39:49 2013] User source parameters:
  Position = (289.0, 292.9) = 12 6 12.00 -8 48 0.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 10974.6 +/- 107.3
  Background aperture counts = 324.4
  Rate = 0.4 +/- 0.004

[Sun Jun 23 17:39:49 2013] Updating counts from extracted products
[Sun Jun 23 17:39:49 2013] Set source signif. to 10974.56/18.01 = 609.28
[Sun Jun 23 17:39:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 17:39:53 2013] Using photon index=1.80, rate=0.371, arf fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src1.arf
[Sun Jun 23 17:39:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 17:39:53 2013] Updating source flux to 3.6e-12
[Sun Jun 23 17:39:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 17:40:04 2013] xmm0502430401/analysis//spectral/fullrun_mos2_xmm0502430401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete