[Sun Jun 23 06:35:43 2013] Detection parameters:
  Position = (290.6, 272.2) = 12 6 11.52 -8 49 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.2 +/- 14.2
  Background counts = 23.3
  Rate = 0.003 +/- 0.0005

[Sun Jun 23 06:35:43 2013] Off-axis axis estimate = 1.98'
[Sun Jun 23 08:10:20 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 08:10:20 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Sun Jun 23 08:10:20 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.028
[Sun Jun 23 08:10:20 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.42"
[Sun Jun 23 09:10:10 2013] fullrun_mos1_xmm0502430401_pi300-10000_cl_pass0_src14.ximg exists
[Sun Jun 23 09:10:10 2013] fullrun_mos1_xmm0502430401_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Jun 23 09:10:10 2013] Fit fullrun_mos1_xmm0502430401_pi300-10000_cl_pass0_src14 appears to have run properly
[Sun Jun 23 09:10:10 2013] fullrun_mos1_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Jun 23 09:10:10 2013] fullrun_mos1_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Jun 23 09:10:10 2013] Fit fullrun_mos1_xmm0502430401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Jun 23 10:27:56 2013] Spatial fit model total counts = 980.818000, observed total counts = 977.000000
[Sun Jun 23 10:27:56 2013] Offset between fit and detection position for source 18 = 6.052237 pixels
[Sun Jun 23 10:27:56 2013] 1007.106700 total counts/ 935.051000 bgd. counts: snr = 2.356409
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 6.052237 pixels
  Position = (290.3, 266.2) = 12 6 11.63 -8 49 56.9
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 72.1 +/- 31.7
  Background counts = 935.1
  Rate = 0.002 +/- 0.001
[Sun Jun 23 10:27:56 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:27:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:27:56 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 10:27:56 2013] Source does appear to be extended
[Sun Jun 23 10:27:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 11:19:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 11:19:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 11:19:19 2013] Initial guess for spatial extent in simple fitting = 14.84"
[Sun Jun 23 11:19:19 2013] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.046
[Sun Jun 23 11:19:19 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 14.84"
[Sun Jun 23 12:02:08 2013] fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 23 12:02:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_src13.csv
[Sun Jun 23 12:02:08 2013] fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 23 12:02:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_src13.csv
[Sun Jun 23 12:02:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:02:08 2013] fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 23 12:02:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 23 12:02:08 2013] fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 23 12:02:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 23 12:02:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502430401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:28:03 2013] Warning, spatial fit 13 centroid is now closest to src. 16
[Sun Jun 23 13:28:03 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 13:28:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 13:28:03 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 13:28:03 2013] Source does appear to be extended
[Sun Jun 23 13:28:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:32:54 2013] XMMSAS src. selection expression = ellipse(25205.109400, 23108.892000, 890.412026, 890.412026, 0.000000, X, Y)
[Sun Jun 23 14:32:54 2013] Writing source region out to fullrun_mos1_xmm0502430401_pi300-10000_pass1_cl_src18_src.reg
[Sun Jun 23 14:32:54 2013] Extracting stamp from image fullrun_mos1_xmm0502430401_pi300-10000_cl_sm2.00.img.gz, (239, 215) - (341, 317)
[Sun Jun 23 14:32:54 2013] XMMSAS bgd. selection expression = annulus(25205.109400, 23108.892000, 1484.020043, 2968.040085, X, Y) && !ellipse(25028.443400, 25406.349000, 1092.016031, 879.056025, 338.177485, X, Y) && !ellipse(25873.674103, 24242.782532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26995.880900, 21082.125800, 451.480013, 280.820808, 14.741500, X, Y) && !ellipse(26360.398000, 23742.086000, 1140.120033, 1140.120033, 0.000000, X, Y) && !ellipse(23135.919403, 25254.608887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24085.187958, 23370.108917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23158.354401, 24310.788452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26150.232400, 22034.177700, 1018.088029, 1018.088029, 0.000000, X, Y)
[Sun Jun 23 14:32:54 2013] Writing fullrun_mos1_xmm0502430401_pi300-10000_pass1_cl_src18.gif
[Sun Jun 23 14:40:00 2013] Mean detx,y = (586.18, 478.30) 
[Sun Jun 23 14:40:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:40:11 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:40:11 2013] Setting source spectrum file to fullrun_mos1_xmm0502430401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun 23 14:40:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502430401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jun 23 14:52:41 2013] Not generating rmf since there are only 72 counts
[Sun Jun 23 14:52:41 2013] rmf not generated due to insufficient counts
[Sun Jun 23 17:39:47 2013] Updating aperture counts using extracted products
[Sun Jun 23 17:39:47 2013] Total counts from fullrun_mos1_xmm0502430401_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 611.00
[Sun Jun 23 17:39:47 2013] Total counts from fullrun_mos1_xmm0502430401_pi300-10000_pass1_cl_src18_bgd.pi.gz = 2129.00
[Sun Jun 23 17:39:48 2013] Got source and background scale factors 2504000.000000, 10729888.000000
[Sun Jun 23 17:39:48 2013] User source parameters:
  Position = (290.3, 266.2) = 12 6 11.63 -8 49 56.9
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source aperture counts = 114.2 +/- 25.7
  Background aperture counts = 496.8
  Rate = 0.004 +/- 0.0009

[Sun Jun 23 17:39:48 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 17:39:48 2013] Using photon index=1.80, rate=0.00243, arf fullrun_mos1_xmm0502430401_pi300-10000_pass1_cl_src18.arf
[Sun Jun 23 17:39:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 17:39:48 2013] Updating source flux to 2.3e-14
[Sun Jun 23 17:39:56 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 17:39:59 2013] xmm0502430401/analysis//spectral/fullrun_mos1_xmm0502430401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete