[Fri Aug 31 11:04:39 2012] Detection parameters:
  Position = (424.4, 186.4) = 23 28 17.55 14 45 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.8 +/- 19.9
  Background counts = 115.7
  Rate = 0.0009 +/- 0.0002

[Fri Aug 31 11:04:39 2012] Off-axis axis estimate = 12.22'
[Fri Aug 31 11:09:18 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 11:09:18 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Fri Aug 31 11:09:18 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.070
[Fri Aug 31 11:09:18 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 12.54"
[Fri Aug 31 13:04:35 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src50.ximg exists
[Fri Aug 31 13:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src50.csv
[Fri Aug 31 13:04:35 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri Aug 31 13:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src50.csv
[Fri Aug 31 13:04:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 13:04:36 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri Aug 31 13:04:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Aug 31 13:04:36 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Aug 31 13:04:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Aug 31 13:04:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:29:23 2012] Spatial fit model total counts = 867.972000, observed total counts = 1888.000000
[Fri Aug 31 14:29:23 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 14:29:23 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 14:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 14:29:23 2012] Assessing source extent using major
[Fri Aug 31 14:29:23 2012] Source does appear to be extended
[Fri Aug 31 14:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 14:29:48 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:29:48 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Fri Aug 31 14:29:48 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.070
[Fri Aug 31 14:29:48 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 12.54"
[Fri Aug 31 15:50:39 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src47.ximg exists
[Fri Aug 31 15:50:39 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src47_1.ximg exists
[Fri Aug 31 15:50:39 2012] Fit fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src47 appears to have run properly
[Fri Aug 31 15:50:40 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Fri Aug 31 15:50:40 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Fri Aug 31 15:50:40 2012] Fit fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Fri Aug 31 17:06:40 2012] Spatial fit model total counts = 1888.390000, observed total counts = 1888.000000
[Fri Aug 31 17:06:40 2012] Offset between fit and detection position for source 53 = 9.813170 pixels
[Fri Aug 31 17:06:40 2012] 1869.783000 total counts/ 1186.060000 bgd. counts: snr = 19.853033
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 9.813170 pixels
  Position = (431.8, 179.9) = 23 28 15.35 14 44 45.1
  Extent = 25.1 (25.1-25.1)", rotation angle = 0
  Source counts = 683.7 +/- 43.2
  Background counts = 1186.1
  Rate = 0.008 +/- 0.0005
[Fri Aug 31 17:06:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:06:40 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 17:06:40 2012] Source does appear to be extended
[Fri Aug 31 17:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:07:01 2012] XMMSAS src. selection expression = ellipse(37515.064000, 15601.942000, 1504.236043, 1504.236043, 0.000000, X, Y)
[Fri Aug 31 17:07:01 2012] Writing source region out to fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src53_src.reg
[Fri Aug 31 17:07:01 2012] Extracting stamp from image fullrun_pn_xmm0502430301_pi300-10000_cl_sm2.00.img.gz, (345, 93) - (518, 266)
[Fri Aug 31 17:07:01 2012] XMMSAS bgd. selection expression = annulus(37515.064000, 15601.942000, 2507.060072, 5014.120144, X, Y) && !ellipse(36176.400970, 16502.423356, 518.635908, 346.321666, 315.965581, X, Y) && !ellipse(37235.059540, 20180.174850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33144.201019, 15854.646255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35436.014343, 17697.397217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35905.439453, 17190.309189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40125.735962, 21458.643143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32641.452637, 20644.889938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33405.023132, 17376.854202, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 17:07:01 2012] Writing fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src53.gif
[Fri Aug 31 17:40:06 2012] Mean detx,y = (12992.55, 6357.59) 
[Fri Aug 31 17:40:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 17:40:35 2012] grppha failed
[Fri Aug 31 17:40:35 2012] Setting source spectrum file to fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src53_src.pi.gz
[Fri Aug 31 17:40:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Fri Aug 31 18:11:28 2012] Updating aperture counts using extracted products
[Fri Aug 31 18:11:28 2012] Error reading totcts from fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src53_src.pi.gz
[Fri Aug 31 18:11:28 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 18:11:33 2012] Flag p found in src. 53 procflags, skipping spectral fitting
[Fri Aug 31 18:11:33 2012] Source 53 has no response, skipping
[Fri Aug 31 18:11:34 2012] xmm0502430301/analysis//spectral/fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete