[Fri Aug 31 11:04:38 2012] Detection parameters:
  Position = (297.7, 297.9) = 23 28 55.54 14 53 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.9 +/- 20.2
  Background counts = 136.3
  Rate = 0.001 +/- 0.0003

[Fri Aug 31 11:04:39 2012] Off-axis axis estimate = 0.06'
[Fri Aug 31 11:09:18 2012] Using EEF radius (= 6.46 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 11:09:18 2012] Initial guess for spatial extent in simple fitting = 6.46"
[Fri Aug 31 11:09:18 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Fri Aug 31 11:09:18 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 6.46"
[Fri Aug 31 13:04:35 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src47.ximg exists
[Fri Aug 31 13:04:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src47.csv
[Fri Aug 31 13:04:35 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri Aug 31 13:04:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src47.csv
[Fri Aug 31 13:04:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 13:04:36 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri Aug 31 13:04:36 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Aug 31 13:04:36 2012] Fit fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Aug 31 14:29:23 2012] Source 50 is offset by -6.205358 and 4.340226 pixels which is larger than
2 X fitted extent = 5.940092 x 5.940092, not incorporating fit results
[Fri Aug 31 14:29:23 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 14:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 14:29:23 2012] Assessing source extent using major
[Fri Aug 31 14:29:23 2012] Source does appear to be extended
[Fri Aug 31 14:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 14:29:48 2012] Using EEF radius (= 6.46 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:29:48 2012] Initial guess for spatial extent in simple fitting = 6.46"
[Fri Aug 31 14:29:48 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Fri Aug 31 14:29:48 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 6.46"
[Fri Aug 31 15:50:39 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src44.ximg exists
[Fri Aug 31 15:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src44.csv
[Fri Aug 31 15:50:39 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Aug 31 15:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src44.csv
[Fri Aug 31 15:50:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 15:50:40 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Aug 31 15:50:40 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Aug 31 15:50:40 2012] Fit fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Fri Aug 31 17:06:40 2012] Source 50 is offset by 5.674780 and -6.784050 pixels which is larger than
2 X fitted extent = 5.940092 x 5.940092, not incorporating fit results
[Fri Aug 31 17:06:40 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 17.809931 pixels away
[Fri Aug 31 17:06:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:06:40 2012] Assessing source extent using major
[Fri Aug 31 17:06:40 2012] Source does appear to be extended
[Fri Aug 31 17:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:07:01 2012] XMMSAS src. selection expression = ellipse(25854.419830, 25871.953644, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 17:07:01 2012] Writing source region out to fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src50_src.reg
[Fri Aug 31 17:07:01 2012] Extracting stamp from image fullrun_pn_xmm0502430301_pi300-10000_cl_sm2.00.img.gz, (260, 260) - (335, 335)
[Fri Aug 31 17:07:01 2012] XMMSAS bgd. selection expression = annulus(25854.419830, 25871.953644, 1087.500000, 2175.000000, X, Y) && !ellipse(23597.921051, 24330.061310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27954.152800, 26973.084800, 462.216813, 462.216813, 0.000000, X, Y) && !ellipse(27024.379730, 25787.133423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.591600, 25445.234000, 1102.992032, 1102.992032, 0.000000, X, Y)
[Fri Aug 31 17:07:01 2012] Writing fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src50.gif
[Fri Aug 31 17:38:05 2012] Mean detx,y = (-1072.31, 1557.77) 
[Fri Aug 31 17:38:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 17:38:23 2012] grppha failed
[Fri Aug 31 17:38:24 2012] Setting source spectrum file to fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src50_src.pi.gz
[Fri Aug 31 17:38:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri Aug 31 17:50:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 17:50:27 2012] rmf not generated due to insufficient counts
[Fri Aug 31 18:11:28 2012] Updating aperture counts using extracted products
[Fri Aug 31 18:11:28 2012] Error reading totcts from fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src50_src.pi.gz
[Fri Aug 31 18:11:28 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 18:11:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 18:11:34 2012] xmm0502430301/analysis//spectral/fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete