[Fri Aug 31 11:04:38 2012] Detection parameters:
  Position = (270.9, 339.0) = 23 29 3.59 14 56 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1138.0 +/- 65.9
  Background counts = 132.5
  Rate = 0.01 +/- 0.0007

[Fri Aug 31 11:04:39 2012] Off-axis axis estimate = 3.55'
[Fri Aug 31 11:09:18 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 11:09:18 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Fri Aug 31 11:09:18 2012] source mask rpix=1.9, npix_max = 22, mask sum = 14, frac = 0.615
[Fri Aug 31 11:09:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.21"
[Fri Aug 31 13:04:34 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 31 13:04:34 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 31 13:04:34 2012] Fit fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Aug 31 13:04:35 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 31 13:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Aug 31 13:04:35 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 31 13:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Aug 31 13:04:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:29:22 2012] Warning, spatial fit 1 centroid is now closest to src. 42
[Fri Aug 31 14:29:23 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 14:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 14:29:23 2012] Assessing source extent using major
[Fri Aug 31 14:29:23 2012] Source does appear to be extended
[Fri Aug 31 14:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 14:29:23 2012] Source is confused with source 42
[Fri Aug 31 14:29:48 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:29:48 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Fri Aug 31 14:29:48 2012] source mask rpix=1.9, npix_max = 22, mask sum = 14, frac = 0.615
[Fri Aug 31 14:29:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.21"
[Fri Aug 31 15:50:38 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 31 15:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 15:50:38 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 31 15:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 15:50:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 15:50:39 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 31 15:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 31 15:50:39 2012] fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 31 15:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 31 15:50:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:06:40 2012] Spatial fit model total counts = 1926.160000, observed total counts = 1671.000000
[Fri Aug 31 17:06:40 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 17:06:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:06:40 2012] Assessing source extent using major
[Fri Aug 31 17:06:40 2012] Source does appear to be extended
[Fri Aug 31 17:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:07:00 2012] Counts = 1137.958496, rescaling region sizes by 2.000000
[Fri Aug 31 17:07:00 2012] XMMSAS src. selection expression = ellipse(23522.194305, 29446.653229, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Aug 31 17:07:00 2012] Writing source region out to fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 31 17:07:00 2012] Extracting stamp from image fullrun_pn_xmm0502430301_pi300-10000_cl_sm2.00.img.gz, (196, 264) - (346, 414)
[Fri Aug 31 17:07:00 2012] XMMSAS bgd. selection expression = annulus(23522.194305, 29446.653229, 4350.000000, 8700.000000, X, Y) && !ellipse(19369.935577, 31779.693848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22516.102814, 30928.409149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.921051, 24330.061310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26679.026794, 36253.075714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14064.253799, 34727.548981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18613.000000, 24975.013062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32255.562714, 37575.986542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30643.386200, 36608.994800, 491.519214, 491.519214, 0.000000, X, Y) && !ellipse(16796.747559, 33892.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32023.229065, 32908.628235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18606.675857, 30145.620302, 1382.064040, 1371.075151, -0.000000, X, Y) && !ellipse(15478.788361, 30292.070312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29219.393341, 30062.803223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17185.941666, 29830.225311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31107.133220, 29518.186200, 299.499209, 299.499209, 0.000000, X, Y) && !ellipse(23743.647644, 28946.859894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14120.247040, 28094.016693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27954.152800, 26973.084800, 462.216813, 462.216813, 0.000000, X, Y) && !ellipse(22569.912292, 26857.450073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29272.703160, 26196.757000, 393.953611, 393.953611, 0.000000, X, Y) && !ellipse(27024.379730, 25787.133423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25854.419830, 25871.953644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31436.751678, 25869.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.591600, 25445.234000, 1102.992032, 1102.992032, 0.000000, X, Y) && !ellipse(20107.962600, 24470.823000, 357.838410, 357.838410, 0.000000, X, Y) && !ellipse(18008.007767, 23466.844910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14535.558670, 21969.347321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26690.247200, 21946.215800, 418.244385, 418.244385, 0.000000, X, Y) && !ellipse(21860.157913, 20822.571136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32641.452637, 20644.889938, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 17:07:00 2012] Writing fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src1.gif
[Fri Aug 31 17:07:21 2012] Mean detx,y = (-4646.91, -815.79) 
[Fri Aug 31 17:07:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 17:08:51 2012] grppha failed
[Fri Aug 31 17:08:52 2012] Setting source spectrum file to fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 17:08:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 31 17:50:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 17:50:22 2012] rmf not generated due to insufficient counts
[Fri Aug 31 18:11:27 2012] Updating aperture counts using extracted products
[Fri Aug 31 18:11:27 2012] Error reading totcts from fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 18:11:28 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 18:11:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 18:11:34 2012] xmm0502430301/analysis//spectral/fullrun_pn_xmm0502430301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete