[Fri Aug 31 11:05:33 2012] Detection parameters:
  Position = (391.2, 375.7) = 23 28 27.49 14 59 6.7
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 92.6 +/- 29.1
  Background counts = 324.1
  Rate = 0.0009 +/- 0.0003

[Fri Aug 31 11:05:34 2012] Off-axis axis estimate = 8.75'
[Fri Aug 31 13:41:05 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 13:41:05 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Fri Aug 31 13:41:05 2012] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.927
[Fri Aug 31 13:41:05 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 10.81"
[Fri Aug 31 14:29:08 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src37.ximg exists
[Fri Aug 31 14:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src37.csv
[Fri Aug 31 14:29:08 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Aug 31 14:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src37.csv
[Fri Aug 31 14:29:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:29:09 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Aug 31 14:29:09 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Aug 31 14:29:09 2012] Fit fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Aug 31 14:29:34 2012] Source 41 is offset by 3.994390 and -7.589048 pixels which is larger than
2 X fitted extent = 1.279657 x 1.279657, not incorporating fit results
[Fri Aug 31 14:29:34 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 14:29:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 14:29:34 2012] Assessing source extent using major
[Fri Aug 31 14:29:34 2012] Source does appear to be extended
[Fri Aug 31 14:29:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 16:24:01 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 16:24:01 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Fri Aug 31 16:24:01 2012] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.927
[Fri Aug 31 16:24:01 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 10.81"
[Fri Aug 31 17:06:31 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_src35.ximg exists
[Fri Aug 31 17:06:31 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Aug 31 17:06:31 2012] Fit fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_src35 appears to have run properly
[Fri Aug 31 17:06:31 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Aug 31 17:06:31 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Aug 31 17:06:31 2012] Fit fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Fri Aug 31 17:06:48 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 12.706383 pixels away
[Fri Aug 31 17:06:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:06:48 2012] Assessing source extent using major
[Fri Aug 31 17:06:48 2012] Source does appear to be extended
[Fri Aug 31 17:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:59:01 2012] XMMSAS src. selection expression = ellipse(33984.331940, 32640.958801, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Aug 31 17:59:01 2012] Writing source region out to fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src41_src.reg
[Fri Aug 31 17:59:01 2012] Extracting stamp from image fullrun_mos2_xmm0502430301_pi300-10000_cl_sm2.00.img.gz, (316, 301) - (466, 451)
[Fri Aug 31 17:59:01 2012] XMMSAS bgd. selection expression = annulus(33984.331940, 32640.958801, 2175.000000, 4350.000000, X, Y) && !ellipse(38937.158997, 34140.402527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37894.536957, 36785.714417, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 17:59:01 2012] Writing fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src41.gif
[Fri Aug 31 18:07:05 2012] Mean detx,y = (-3492.84, 7825.81) 
[Fri Aug 31 18:07:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 18:07:42 2012] grppha failed
[Fri Aug 31 18:07:42 2012] Setting source spectrum file to fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src41_src.pi.gz
[Fri Aug 31 18:07:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Fri Aug 31 18:09:54 2012] Not generating rmf since there are only 92 counts
[Fri Aug 31 18:09:54 2012] rmf not generated due to insufficient counts
[Fri Aug 31 18:11:29 2012] Updating aperture counts using extracted products
[Fri Aug 31 18:11:29 2012] Error reading totcts from fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src41_src.pi.gz
[Fri Aug 31 18:11:29 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 18:11:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 18:11:33 2012] xmm0502430301/analysis//spectral/fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete