[Fri Aug 31 11:05:33 2012] Detection parameters: Position = (311.3, 293.9) = 23 28 51.48 14 53 1.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 90.8 +/- 18.0 Background counts = 87.8 Rate = 0.0009 +/- 0.0002 [Fri Aug 31 11:05:34 2012] Off-axis axis estimate = 0.99' [Fri Aug 31 13:41:05 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting [Fri Aug 31 13:41:05 2012] Initial guess for spatial extent in simple fitting = 6.92" [Fri Aug 31 13:41:05 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.915 [Fri Aug 31 13:41:05 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 6.92" [Fri Aug 31 14:29:08 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src36.ximg exists [Fri Aug 31 14:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src36.csv [Fri Aug 31 14:29:08 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src36_1.ximg exists [Fri Aug 31 14:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src36.csv [Fri Aug 31 14:29:08 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src36_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Aug 31 14:29:09 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists [Fri Aug 31 14:29:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src36.csv [Fri Aug 31 14:29:09 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists [Fri Aug 31 14:29:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src36.csv [Fri Aug 31 14:29:09 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0502430301_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Aug 31 14:29:34 2012] Spatial fit model total counts = 958.470000, observed total counts = 870.000000 [Fri Aug 31 14:29:34 2012] Poor agreement between spatial fit and data for source 34 It may help to tweak spatial fit manually Not incorporating fit results [Fri Aug 31 14:29:34 2012] Vigneting correction estimate = 1.000000 [Fri Aug 31 14:29:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Aug 31 14:29:34 2012] Assessing source extent using major [Fri Aug 31 14:29:34 2012] Source does appear to be extended [Fri Aug 31 14:29:34 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Aug 31 14:29:34 2012] Source is confused with source 33 [Fri Aug 31 16:24:01 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting [Fri Aug 31 16:24:01 2012] Initial guess for spatial extent in simple fitting = 6.92" [Fri Aug 31 16:24:01 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.915 [Fri Aug 31 16:24:01 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 6.92" [Fri Aug 31 17:06:31 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_src34.ximg exists [Fri Aug 31 17:06:31 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_src34_1.ximg exists [Fri Aug 31 17:06:31 2012] Fit fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_src34 appears to have run properly [Fri Aug 31 17:06:31 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists [Fri Aug 31 17:06:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src34.csv [Fri Aug 31 17:06:31 2012] fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists [Fri Aug 31 17:06:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src34.csv [Fri Aug 31 17:06:31 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0502430301_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Aug 31 17:06:48 2012] Source 34 is offset by 1.538701 and 6.613527 pixels which is larger than 2 X fitted extent = 1.612377 x 1.612377, not incorporating fit results [Fri Aug 31 17:06:48 2012] Spatial fit model total counts = 959.455000, observed total counts = 870.000000 [Fri Aug 31 17:06:48 2012] Poor agreement between spatial fit and data for source 34 It may help to tweak spatial fit manually Not incorporating fit results [Fri Aug 31 17:06:48 2012] Vigneting correction estimate = 1.000000 [Fri Aug 31 17:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Aug 31 17:06:48 2012] Assessing source extent using major [Fri Aug 31 17:06:48 2012] Source does appear to be extended [Fri Aug 31 17:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Aug 31 17:59:01 2012] XMMSAS src. selection expression = ellipse(27030.326996, 25519.410889, 652.500000, 652.500000, 0.000000, X, Y) [Fri Aug 31 17:59:01 2012] Writing source region out to fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src34_src.reg [Fri Aug 31 17:59:01 2012] Extracting stamp from image fullrun_mos2_xmm0502430301_pi300-10000_cl_sm2.00.img.gz, (274, 256) - (349, 331) [Fri Aug 31 17:59:01 2012] XMMSAS bgd. selection expression = annulus(27030.326996, 25519.410889, 1087.500000, 2175.000000, X, Y) && !ellipse(29266.247900, 26206.504400, 347.611210, 347.611210, 0.000000, X, Y) && !ellipse(27400.180200, 26006.165000, 1122.216032, 1122.216032, 0.000000, X, Y) && !ellipse(26890.027400, 25021.370000, 796.304823, 796.304823, 0.000000, X, Y) && !ellipse(26915.319092, 26122.009613, 870.000000, 870.000000, 0.000000, X, Y) [Fri Aug 31 17:59:01 2012] Writing fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src34.gif [Fri Aug 31 18:06:52 2012] Mean detx,y = (19.83, -1539.38) [Fri Aug 31 18:06:53 2012] Setting backscal keywords in source and bgd. spectrum [Fri Aug 31 18:06:58 2012] grppha failed [Fri Aug 31 18:06:58 2012] Setting source spectrum file to fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src34_src.pi.gz [Fri Aug 31 18:06:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src34_bgd.pi.gz [Fri Aug 31 18:09:54 2012] Not generating rmf since there are only 90 counts [Fri Aug 31 18:09:54 2012] rmf not generated due to insufficient counts [Fri Aug 31 18:11:29 2012] Updating aperture counts using extracted products [Fri Aug 31 18:11:29 2012] Error reading totcts from fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src34_src.pi.gz [Fri Aug 31 18:11:29 2012] No arf file for this source, not re-computing flux [Fri Aug 31 18:11:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri Aug 31 18:11:33 2012] xmm0502430301/analysis//spectral/fullrun_mos2_xmm0502430301_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete