[Thu May  9 22:19:37 2013] Detection parameters:
  Position = (192.5, 313.6) = 9 58 59.69 65 36 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 605.9 +/- 31.7
  Background counts = 83.0
  Rate = 0.01 +/- 0.0006

[Thu May  9 22:19:38 2013] Off-axis axis estimate = 7.76'
[Thu May  9 22:22:20 2013] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Thu May  9 22:22:20 2013] Initial guess for spatial extent in simple fitting = 10.31"
[Thu May  9 22:22:20 2013] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.729
[Thu May  9 22:22:20 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.31"
[Thu May  9 22:55:39 2013] fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_src4.ximg exists
[Thu May  9 22:55:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_src4.csv
[Thu May  9 22:55:39 2013] fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May  9 22:55:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_src4.csv
[Thu May  9 22:55:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 22:55:40 2013] fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May  9 22:55:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May  9 22:55:40 2013] fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May  9 22:55:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May  9 22:55:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 23:54:01 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.300514 pixels away
[Thu May  9 23:54:01 2013] Vigneting correction estimate = 1.000000
[Thu May  9 23:54:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 23:54:01 2013] Assessing source extent using major
[Thu May  9 23:54:01 2013] Source does appear to be extended
[Thu May  9 23:54:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 23:54:14 2013] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Thu May  9 23:54:14 2013] Initial guess for spatial extent in simple fitting = 10.31"
[Thu May  9 23:54:14 2013] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.729
[Thu May  9 23:54:14 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.31"
[Fri May 10 00:25:22 2013] fullrun_pn_xmm0502430201_pi300-10000_cl_pass1_src4.ximg exists
[Fri May 10 00:25:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430201_pi300-10000_cl_pass1_src4.csv
[Fri May 10 00:25:22 2013] fullrun_pn_xmm0502430201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May 10 00:25:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502430201_pi300-10000_cl_pass1_src4.csv
[Fri May 10 00:25:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502430201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502430201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 00:25:22 2013] fullrun_pn_xmm0502430201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May 10 00:25:22 2013] fullrun_pn_xmm0502430201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May 10 00:25:22 2013] Fit fullrun_pn_xmm0502430201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri May 10 01:39:30 2013] Spatial fit model total counts = 1189.150000, observed total counts = 1121.000000
[Fri May 10 01:39:30 2013] Offset between fit and detection position for source 4 = 1.100988 pixels
[Fri May 10 01:39:30 2013] 1180.409000 total counts/ 737.276000 bgd. counts: snr = 16.319958
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.100988 pixels
  Position = (191.5, 313.9) = 9 59 0.44 65 36 11.2
  Extent = 7.6 (6.8-8.9)", rotation angle = 0
  Source counts = 443.1 +/- 34.4
  Background counts = 737.3
  Rate = 0.01 +/- 0.0008
[Fri May 10 01:39:30 2013] Vigneting correction estimate = 1.000000
[Fri May 10 01:39:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 01:39:30 2013] Assessing source extent using major axis lower bound
[Fri May 10 01:39:30 2013] Source does appear to be extended
[Fri May 10 01:39:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 01:39:48 2013] XMMSAS src. selection expression = ellipse(16608.045000, 27257.192000, 456.667213, 456.667213, 0.000000, X, Y)
[Fri May 10 01:39:48 2013] Writing source region out to fullrun_pn_xmm0502430201_pi300-10000_pass1_cl_src4_src.reg
[Fri May 10 01:39:48 2013] Extracting stamp from image fullrun_pn_xmm0502430201_pi300-10000_cl_sm2.00.img.gz, (165, 288) - (218, 340)
[Fri May 10 01:39:48 2013] XMMSAS bgd. selection expression = annulus(16608.045000, 27257.192000, 761.112022, 1522.224044, X, Y) && !ellipse(18264.360138, 24503.628540, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(18383.098358, 25806.594788, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 01:39:48 2013] Writing fullrun_pn_xmm0502430201_pi300-10000_pass1_cl_src4.gif
[Fri May 10 01:49:58 2013] Mean detx,y = (5303.04, 8428.19) 
[Fri May 10 01:50:01 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 01:50:14 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 01:50:15 2013] Setting source spectrum file to fullrun_pn_xmm0502430201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 10 01:50:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502430201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May 10 03:28:36 2013] Updating aperture counts using extracted products
[Fri May 10 03:28:36 2013] Total counts from fullrun_pn_xmm0502430201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 690.00
[Fri May 10 03:28:36 2013] Total counts from fullrun_pn_xmm0502430201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1032.00
[Fri May 10 03:28:36 2013] Got source and background scale factors 504426.000000, 3780673.000000
[Fri May 10 03:28:36 2013] User source parameters:
  Position = (191.5, 313.9) = 9 59 0.44 65 36 11.2
  Extent = 7.6 (6.8-8.9)", rotation angle = 0
  Source aperture counts = 552.3 +/- 27.3
  Background aperture counts = 137.7
  Rate = 0.01 +/- 0.0007

[Fri May 10 03:28:43 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 03:28:43 2013] Using photon index=1.80, rate=0.0107, arf fullrun_pn_xmm0502430201_pi300-10000_pass1_cl_src4.arf
[Fri May 10 03:28:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 03:28:43 2013] Updating source flux to 5.4e-14
[Fri May 10 03:29:06 2013] xmm0502430201/analysis//spectral/fullrun_pn_xmm0502430201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete