[Thu May  9 22:19:52 2013] Detection parameters:
  Position = (214.3, 294.0) = 9 58 44.36 65 34 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.9 +/- 19.0
  Background counts = 104.8
  Rate = 0.001 +/- 0.0003

[Thu May  9 22:19:52 2013] Off-axis axis estimate = 6.11'
[Thu May  9 22:55:40 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Thu May  9 22:55:40 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Thu May  9 22:55:40 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.835
[Thu May  9 22:55:40 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.48"
[Thu May  9 23:26:32 2013] fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_src17.ximg exists
[Thu May  9 23:26:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_src17.csv
[Thu May  9 23:26:32 2013] fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu May  9 23:26:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_src17.csv
[Thu May  9 23:26:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 23:26:32 2013] fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu May  9 23:26:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu May  9 23:26:32 2013] fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu May  9 23:26:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu May  9 23:26:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502430201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 23:54:04 2013] Spatial fit model total counts = 624.129000, observed total counts = 715.000000
[Thu May  9 23:54:04 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 23:54:04 2013] Vigneting correction estimate = 1.000000
[Thu May  9 23:54:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 23:54:04 2013] Assessing source extent using major
[Thu May  9 23:54:04 2013] Source does appear to be extended
[Thu May  9 23:54:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 00:25:22 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Fri May 10 00:25:22 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Fri May 10 00:25:22 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.835
[Fri May 10 00:25:22 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.48"
[Fri May 10 00:55:12 2013] fullrun_mos1_xmm0502430201_pi300-10000_cl_pass1_src17.ximg exists
[Fri May 10 00:55:12 2013] fullrun_mos1_xmm0502430201_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri May 10 00:55:12 2013] Fit fullrun_mos1_xmm0502430201_pi300-10000_cl_pass1_src17 appears to have run properly
[Fri May 10 00:55:12 2013] fullrun_mos1_xmm0502430201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri May 10 00:55:12 2013] fullrun_mos1_xmm0502430201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri May 10 00:55:12 2013] Fit fullrun_mos1_xmm0502430201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri May 10 01:39:34 2013] Source 9 is offset by -4.489053 and -7.126877 pixels which is larger than
2 X fitted extent = 8.720828 x 5.240506, not incorporating fit results
[Fri May 10 01:39:34 2013] Vigneting correction estimate = 1.000000
[Fri May 10 01:39:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 01:39:34 2013] Assessing source extent using major
[Fri May 10 01:39:34 2013] Source does appear to be extended
[Fri May 10 01:39:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 02:38:01 2013] XMMSAS src. selection expression = ellipse(18592.990372, 25527.439697, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 02:38:01 2013] Writing source region out to fullrun_mos1_xmm0502430201_pi300-10000_pass1_cl_src9_src.reg
[Fri May 10 02:38:01 2013] Extracting stamp from image fullrun_mos1_xmm0502430201_pi300-10000_cl_sm2.00.img.gz, (177, 256) - (252, 331)
[Fri May 10 02:38:01 2013] XMMSAS bgd. selection expression = annulus(18592.990372, 25527.439697, 1087.500000, 2175.000000, X, Y) && !ellipse(18261.595800, 24528.985800, 441.976813, 358.972810, 109.470400, X, Y)
[Fri May 10 02:38:01 2013] Writing fullrun_mos1_xmm0502430201_pi300-10000_pass1_cl_src9.gif
[Fri May 10 02:42:59 2013] Mean detx,y = (-5668.84, 4713.68) 
[Fri May 10 02:43:00 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 02:43:26 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 02:43:26 2013] Setting source spectrum file to fullrun_mos1_xmm0502430201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri May 10 02:43:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0502430201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri May 10 02:56:59 2013] Not generating rmf since there are only 81 counts
[Fri May 10 02:56:59 2013] rmf not generated due to insufficient counts
[Fri May 10 03:28:47 2013] Updating aperture counts using extracted products
[Fri May 10 03:28:47 2013] Total counts from fullrun_mos1_xmm0502430201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 513.00
[Fri May 10 03:28:47 2013] Total counts from fullrun_mos1_xmm0502430201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1841.00
[Fri May 10 03:28:47 2013] Got source and background scale factors 1102336.000000, 6048358.000000
[Fri May 10 03:28:47 2013] User source parameters:
  Position = (214.3, 294.0) = 9 58 44.36 65 34 39.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 177.5 +/- 23.7
  Background aperture counts = 335.5
  Rate = 0.004 +/- 0.0005

[Fri May 10 03:28:47 2013] Updating counts from extracted products
[Fri May 10 03:28:47 2013] Set source signif. to 177.47/18.32 = 9.69
[Fri May 10 03:28:48 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 03:28:48 2013] Using photon index=1.80, rate=0.00386, arf fullrun_mos1_xmm0502430201_pi300-10000_pass1_cl_src9.arf
[Fri May 10 03:28:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 03:28:48 2013] Updating source flux to 5.8e-14
[Fri May 10 03:28:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 03:28:56 2013] xmm0502430201/analysis//spectral/fullrun_mos1_xmm0502430201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete