[Fri Aug 24 01:35:12 2012] Detection parameters:
  Position = (280.3, 280.2) = 17 56 32.35 -21 59 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.0 +/- 15.5
  Background counts = 14.2
  Rate = 0.006 +/- 0.0008

[Fri Aug 24 01:35:12 2012] Off-axis axis estimate = 1.86'
[Fri Aug 24 02:20:28 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 02:20:28 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Fri Aug 24 02:20:28 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Fri Aug 24 02:20:28 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.36"
[Fri Aug 24 02:48:11 2012] fullrun_mos2_xmm0502370301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 24 02:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502370301_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 02:48:11 2012] fullrun_mos2_xmm0502370301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 24 02:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502370301_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 02:48:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502370301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502370301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 02:48:11 2012] fullrun_mos2_xmm0502370301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 24 02:48:11 2012] fullrun_mos2_xmm0502370301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 24 02:48:11 2012] Fit fullrun_mos2_xmm0502370301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 24 02:48:19 2012] Source 3 is offset by 7.032879 and -6.031752 pixels which is larger than
2 X fitted extent = 2.405733 x 2.405733, not incorporating fit results
[Fri Aug 24 02:48:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 02:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 02:48:19 2012] Assessing source extent using major
[Fri Aug 24 02:48:19 2012] Source does appear to be extended
[Fri Aug 24 02:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 03:22:38 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 03:22:38 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Fri Aug 24 03:22:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Fri Aug 24 03:22:38 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.36"
[Fri Aug 24 03:32:11 2012] fullrun_mos2_xmm0502370301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 24 03:32:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502370301_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 03:32:11 2012] fullrun_mos2_xmm0502370301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 24 03:32:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502370301_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 03:32:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502370301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502370301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 03:32:11 2012] fullrun_mos2_xmm0502370301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 24 03:32:11 2012] fullrun_mos2_xmm0502370301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 24 03:32:11 2012] Fit fullrun_mos2_xmm0502370301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 24 03:32:18 2012] Source 3 is offset by 7.032879 and -6.043131 pixels which is larger than
2 X fitted extent = 2.340841 x 2.340841, not incorporating fit results
[Fri Aug 24 03:32:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 03:32:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 03:32:18 2012] Assessing source extent using major
[Fri Aug 24 03:32:18 2012] Source does appear to be extended
[Fri Aug 24 03:32:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 04:05:33 2012] XMMSAS src. selection expression = ellipse(24334.508484, 24332.883606, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 04:05:33 2012] Writing source region out to fullrun_mos2_xmm0502370301_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 24 04:05:33 2012] Extracting stamp from image fullrun_mos2_xmm0502370301_pi300-10000_cl_sm2.00.img.gz, (243, 243) - (318, 318)
[Fri Aug 24 04:05:33 2012] XMMSAS bgd. selection expression = annulus(24334.508484, 24332.883606, 1087.500000, 2175.000000, X, Y) && !ellipse(22198.153200, 24146.313200, 415.226412, 415.226412, 0.000000, X, Y) && !ellipse(23625.477540, 24866.302200, 406.058412, 406.058412, 0.000000, X, Y)
[Fri Aug 24 04:05:33 2012] Writing fullrun_mos2_xmm0502370301_pi300-10000_pass1_cl_src3.gif
[Fri Aug 24 04:07:21 2012] Mean detx,y = (2634.02, -3455.27) 
[Fri Aug 24 04:07:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 04:07:30 2012] grppha failed
[Fri Aug 24 04:07:30 2012] Setting source spectrum file to fullrun_mos2_xmm0502370301_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 24 04:07:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502370301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 24 04:07:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 04:07:47 2012] rmf not generated due to insufficient counts
[Fri Aug 24 04:08:18 2012] Updating aperture counts using extracted products
[Fri Aug 24 04:08:18 2012] Error reading totcts from fullrun_mos2_xmm0502370301_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 24 04:08:18 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 04:08:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 04:08:21 2012] xmm0502370301/analysis//spectral/fullrun_mos2_xmm0502370301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete