[Fri Aug 24 01:34:52 2012] Detection parameters:
  Position = (255.7, 278.0) = 17 56 40.04 -21 59 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4674.6 +/- 81.8
  Background counts = 12.9
  Rate = 0.3 +/- 0.005

[Fri Aug 24 01:34:53 2012] Off-axis axis estimate = 3.43'
[Fri Aug 24 02:08:10 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 02:08:10 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Fri Aug 24 02:08:10 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.888
[Fri Aug 24 02:08:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.15"
[Fri Aug 24 02:20:28 2012] fullrun_mos1_xmm0502370301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 24 02:20:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502370301_pi300-10000_cl_pass0_src1.csv
[Fri Aug 24 02:20:28 2012] fullrun_mos1_xmm0502370301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 24 02:20:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502370301_pi300-10000_cl_pass0_src1.csv
[Fri Aug 24 02:20:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502370301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502370301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 02:20:28 2012] fullrun_mos1_xmm0502370301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 24 02:20:28 2012] fullrun_mos1_xmm0502370301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 24 02:20:28 2012] Fit fullrun_mos1_xmm0502370301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 24 02:48:17 2012] Spatial fit model total counts = 4306.000000, observed total counts = 4306.000000
[Fri Aug 24 02:48:17 2012] Offset between fit and detection position for source 1 = 0.049538 pixels
[Fri Aug 24 02:48:17 2012] 4320.102000 total counts/ 959.452000 bgd. counts: snr = 108.495483
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.049538 pixels
  Position = (255.7, 278.1) = 17 56 40.04 -21 59 54.4
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 3360.7 +/- 65.7
  Background counts = 959.5
  Rate = 0.2 +/- 0.003
[Fri Aug 24 02:48:17 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 02:48:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 02:48:17 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 02:48:17 2012] Source does appear to be extended
[Fri Aug 24 02:48:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 03:13:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 03:13:51 2012] Initial guess for spatial extent in simple fitting = 5.59"
[Fri Aug 24 03:13:51 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.941
[Fri Aug 24 03:13:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.59"
[Fri Aug 24 03:22:37 2012] fullrun_mos1_xmm0502370301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 24 03:22:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502370301_pi300-10000_cl_pass1_src1.csv
[Fri Aug 24 03:22:37 2012] fullrun_mos1_xmm0502370301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 24 03:22:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502370301_pi300-10000_cl_pass1_src1.csv
[Fri Aug 24 03:22:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502370301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502370301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 03:22:37 2012] fullrun_mos1_xmm0502370301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 24 03:22:37 2012] fullrun_mos1_xmm0502370301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 24 03:22:37 2012] Fit fullrun_mos1_xmm0502370301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 24 03:32:17 2012] Spatial fit model total counts = 4292.000000, observed total counts = 4292.000000
[Fri Aug 24 03:32:17 2012] Offset between fit and detection position for source 1 = 0.011974 pixels
[Fri Aug 24 03:32:17 2012] 4328.361000 total counts/ 997.141000 bgd. counts: snr = 105.493337
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011974 pixels
  Position = (255.7, 278.1) = 17 56 40.05 -21 59 54.4
  Extent = 5.5 (5.4-5.7)", rotation angle = 0
  Source counts = 3331.2 +/- 65.8
  Background counts = 997.1
  Rate = 0.2 +/- 0.003
[Fri Aug 24 03:32:17 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 03:32:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 03:32:17 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 03:32:17 2012] Source does appear to be extended
[Fri Aug 24 03:32:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 04:03:58 2012] Counts = 3331.220000, rescaling region sizes by 2.000000
[Fri Aug 24 04:03:58 2012] XMMSAS src. selection expression = ellipse(22194.549800, 24144.116000, 662.539219, 662.539219, 0.000000, X, Y)
[Fri Aug 24 04:03:58 2012] Writing source region out to fullrun_mos1_xmm0502370301_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 24 04:03:58 2012] Extracting stamp from image fullrun_mos1_xmm0502370301_pi300-10000_cl_sm2.00.img.gz, (218, 240) - (294, 316)
[Fri Aug 24 04:03:58 2012] XMMSAS bgd. selection expression = annulus(22194.549800, 24144.116000, 2208.464064, 4416.928127, X, Y) && !ellipse(23626.343514, 24853.995658, 461.221387, 415.680962, 81.477727, X, Y) && !ellipse(24330.382568, 24395.128113, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 04:03:58 2012] Writing fullrun_mos1_xmm0502370301_pi300-10000_pass1_cl_src1.gif
[Fri Aug 24 04:04:00 2012] Mean detx,y = (-3891.68, -4647.42) 
[Fri Aug 24 04:04:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 04:04:26 2012] grppha failed
[Fri Aug 24 04:04:26 2012] Setting source spectrum file to fullrun_mos1_xmm0502370301_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 24 04:04:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502370301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 24 04:08:18 2012] Updating aperture counts using extracted products
[Fri Aug 24 04:08:18 2012] Error reading totcts from fullrun_mos1_xmm0502370301_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 24 04:08:18 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 04:08:19 2012] Source 1 has no response, skipping
[Fri Aug 24 04:08:20 2012] xmm0502370301/analysis//spectral/fullrun_mos1_xmm0502370301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete