[Wed May 30 11:02:53 2012] Detection parameters:
  Position = (256.0, 277.9) = 17 56 40.06 -21 59 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31019.8 +/- 207.9
  Background counts = 282.1
  Rate = 0.5 +/- 0.003

[Wed May 30 11:02:54 2012] Off-axis axis estimate = 3.42'
[Wed May 30 11:10:02 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Wed May 30 11:10:02 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Wed May 30 11:10:02 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.712
[Wed May 30 11:10:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.14"
[Wed May 30 12:07:21 2012] fullrun_pn_xmm0502370201_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 12:07:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502370201_pi300-10000_cl_pass0_src1.csv
[Wed May 30 12:07:21 2012] fullrun_pn_xmm0502370201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 12:07:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502370201_pi300-10000_cl_pass0_src1.csv
[Wed May 30 12:07:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502370201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502370201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 12:07:21 2012] fullrun_pn_xmm0502370201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 12:07:21 2012] fullrun_pn_xmm0502370201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 12:07:21 2012] Fit fullrun_pn_xmm0502370201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 30 14:57:59 2012] Spatial fit model total counts = 27437.900000, observed total counts = 25197.000000
[Wed May 30 14:57:59 2012] Offset between fit and detection position for source 1 = 0.059728 pixels
[Wed May 30 14:57:59 2012] 27732.530000 total counts/ 8921.230000 bgd. counts: snr = 199.161983
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.059728 pixels
  Position = (256.0, 277.8) = 17 56 40.06 -21 59 54.4
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 18811.3 +/- 166.5
  Background counts = 8921.2
  Rate = 0.2 +/- 0.002
[Wed May 30 14:57:59 2012] Vigneting correction estimate = 1.000000
[Wed May 30 14:57:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 14:57:59 2012] Assessing source extent using major axis lower bound
[Wed May 30 14:57:59 2012] Source does appear to be extended
[Wed May 30 14:57:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 14:58:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 14:58:13 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Wed May 30 14:58:13 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.320
[Wed May 30 14:58:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.40"
[Wed May 30 15:40:54 2012] fullrun_pn_xmm0502370201_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 15:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502370201_pi300-10000_cl_pass1_src1.csv
[Wed May 30 15:40:54 2012] fullrun_pn_xmm0502370201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 15:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502370201_pi300-10000_cl_pass1_src1.csv
[Wed May 30 15:40:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502370201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502370201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 15:40:54 2012] fullrun_pn_xmm0502370201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 15:40:54 2012] fullrun_pn_xmm0502370201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 15:40:54 2012] Fit fullrun_pn_xmm0502370201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 30 19:02:43 2012] Spatial fit model total counts = 27445.800000, observed total counts = 25118.000000
[Wed May 30 19:02:43 2012] Offset between fit and detection position for source 1 = 0.007802 pixels
[Wed May 30 19:02:43 2012] 27826.500000 total counts/ 9048.500000 bgd. counts: snr = 197.406314
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007802 pixels
  Position = (256.0, 277.8) = 17 56 40.06 -21 59 54.5
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 18778.0 +/- 166.8
  Background counts = 9048.5
  Rate = 0.2 +/- 0.002
[Wed May 30 19:02:43 2012] Vigneting correction estimate = 1.000000
[Wed May 30 19:02:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 19:02:43 2012] Assessing source extent using major axis lower bound
[Wed May 30 19:02:43 2012] Source does appear to be extended
[Wed May 30 19:02:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 19:02:59 2012] Counts = 18778.000000, rescaling region sizes by 3.000000
[Wed May 30 19:02:59 2012] XMMSAS src. selection expression = ellipse(22220.586960, 24123.267420, 972.545428, 972.545428, 0.000000, X, Y)
[Wed May 30 19:02:59 2012] Writing source region out to fullrun_pn_xmm0502370201_pi300-10000_pass1_cl_src1_src.reg
[Wed May 30 19:02:59 2012] Extracting stamp from image fullrun_pn_xmm0502370201_pi300-10000_cl_sm2.00.img.gz, (200, 222) - (312, 334)
[Wed May 30 19:02:59 2012] XMMSAS bgd. selection expression = annulus(22220.586960, 24123.267420, 4862.727140, 9725.454280, X, Y) && !ellipse(23654.355400, 24847.870200, 1413.307241, 1282.718437, 62.755192, X, Y) && !ellipse(32133.473846, 26128.681702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.067000, 27151.461800, 1362.732039, 1362.732039, 0.000000, X, Y) && !ellipse(31242.799133, 14136.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18144.643539, 33018.464142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12495.204498, 32402.000854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23135.446808, 28726.043762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30191.505768, 28591.932922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24403.605621, 28450.048157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31956.420563, 27008.372559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27210.955800, 24864.688400, 698.091220, 698.091220, 0.000000, X, Y) && !ellipse(21441.025696, 14166.634384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24518.332092, 23862.489410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25866.053200, 23141.870800, 414.695212, 414.695212, 0.000000, X, Y) && !ellipse(27150.536102, 19887.573364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26060.424140, 19343.488940, 590.923217, 590.923217, 0.000000, X, Y) && !ellipse(22242.902954, 18308.865067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25356.423048, 16262.930000, 325.056009, 325.056009, 0.000000, X, Y) && !ellipse(30481.087158, 15805.403427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21827.181122, 15863.118454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21618.725479, 14552.805740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20343.978210, 14542.943634, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 19:02:59 2012] Writing fullrun_pn_xmm0502370201_pi300-10000_pass1_cl_src1.gif
[Wed May 30 19:03:44 2012] Mean detx,y = (-4335.46, 3953.12) 
[Wed May 30 19:03:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 19:06:57 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 19:06:57 2012] Setting source spectrum file to fullrun_pn_xmm0502370201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 19:06:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502370201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 30 21:33:31 2012] Updating aperture counts using extracted products
[Wed May 30 21:33:31 2012] Error reading totcts from fullrun_pn_xmm0502370201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 21:33:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 21:33:32 2012] Using photon index=1.80, rate=0.236, arf fullrun_pn_xmm0502370201_pi300-10000_pass1_cl_src1.arf
[Wed May 30 21:33:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 21:33:32 2012] Updating source flux to 7.8e-13
[Wed May 30 21:37:42 2012] Reading fit data from xmm0502370201/analysis//spectral/fullrun_pn_xmm0502370201_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 30 21:37:42 2012] Spectral fit parameter nH value = 6.14938e+21
[Wed May 30 21:37:42 2012] Spectral fit parameter PhoIndex value = 6.09666
[Wed May 30 21:37:42 2012] Failed to get F(0.3-8.0) from xmm0502370201/analysis//spectral/fullrun_pn_xmm0502370201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 30 21:37:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 21:37:42 2012] Using Nh = 6.1e+21, photon index=6.10, rate=0.236, arf fullrun_pn_xmm0502370201_pi300-10000_pass1_cl_src1.arf
[Wed May 30 21:37:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 21:37:42 2012] Updating source flux to 4.7e-13