[Wed May 30 11:03:41 2012] Detection parameters: Position = (272.4, 286.1) = 17 56 34.93 -21 59 17.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 20540.9 +/- 174.7 Background counts = 92.3 Rate = 0.2 +/- 0.002 [Wed May 30 11:03:42 2012] Off-axis axis estimate = 2.09' [Wed May 30 13:56:07 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting [Wed May 30 13:56:07 2012] Initial guess for spatial extent in simple fitting = 7.47" [Wed May 30 13:56:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.016 [Wed May 30 13:56:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.47" [Wed May 30 14:57:51 2012] fullrun_mos2_xmm0502370201_pi300-10000_cl_pass0_src1.ximg exists [Wed May 30 14:57:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502370201_pi300-10000_cl_pass0_src1.csv [Wed May 30 14:57:51 2012] fullrun_mos2_xmm0502370201_pi300-10000_cl_pass0_src1_1.ximg exists [Wed May 30 14:57:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502370201_pi300-10000_cl_pass0_src1.csv [Wed May 30 14:57:51 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0502370201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0502370201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 30 14:57:52 2012] fullrun_mos2_xmm0502370201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed May 30 14:57:52 2012] fullrun_mos2_xmm0502370201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed May 30 14:57:52 2012] Fit fullrun_mos2_xmm0502370201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Wed May 30 14:58:05 2012] Spatial fit model total counts = 17643.500000, observed total counts = 17635.000000 [Wed May 30 14:58:05 2012] Offset between fit and detection position for source 2 = 0.063435 pixels [Wed May 30 14:58:05 2012] 17723.440000 total counts/ 4421.240000 bgd. counts: snr = 200.055929 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.063435 pixels Position = (272.4, 286.1) = 17 56 34.94 -21 59 18.3 Extent = 5.2 (5.2-5.3)", rotation angle = 0 Source counts = 13302.2 +/- 133.1 Background counts = 4421.2 Rate = 0.1 +/- 0.001 [Wed May 30 14:58:05 2012] Vigneting correction estimate = 1.000000 [Wed May 30 14:58:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 30 14:58:05 2012] Assessing source extent using major axis lower bound [Wed May 30 14:58:05 2012] Source does appear to be extended [Wed May 30 14:58:05 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 30 16:41:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 30 16:41:49 2012] Initial guess for spatial extent in simple fitting = 5.24" [Wed May 30 16:41:49 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.033 [Wed May 30 16:41:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.24" [Wed May 30 19:02:36 2012] fullrun_mos2_xmm0502370201_pi300-10000_cl_pass1_src1.ximg exists [Wed May 30 19:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502370201_pi300-10000_cl_pass1_src1.csv [Wed May 30 19:02:36 2012] fullrun_mos2_xmm0502370201_pi300-10000_cl_pass1_src1_1.ximg exists [Wed May 30 19:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502370201_pi300-10000_cl_pass1_src1.csv [Wed May 30 19:02:36 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0502370201_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0502370201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 30 19:02:36 2012] fullrun_mos2_xmm0502370201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed May 30 19:02:36 2012] fullrun_mos2_xmm0502370201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed May 30 19:02:36 2012] Fit fullrun_mos2_xmm0502370201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Wed May 30 19:02:50 2012] Spatial fit model total counts = 17636.100000, observed total counts = 17635.000000 [Wed May 30 19:02:50 2012] Offset between fit and detection position for source 2 = 0.000373 pixels [Wed May 30 19:02:50 2012] 17716.550000 total counts/ 4412.250000 bgd. counts: snr = 200.291248 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.000373 pixels Position = (272.4, 286.1) = 17 56 34.94 -21 59 18.3 Extent = 5.2 (5.2-5.3)", rotation angle = 0 Source counts = 13304.3 +/- 133.1 Background counts = 4412.2 Rate = 0.1 +/- 0.001 [Wed May 30 19:02:50 2012] Vigneting correction estimate = 1.000000 [Wed May 30 19:02:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 30 19:02:50 2012] Assessing source extent using major axis lower bound [Wed May 30 19:02:50 2012] Source does appear to be extended [Wed May 30 19:02:50 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 30 21:02:34 2012] Counts = 13304.300000, rescaling region sizes by 3.000000 [Wed May 30 21:02:34 2012] XMMSAS src. selection expression = ellipse(23646.775600, 24846.477000, 942.532227, 942.532227, 0.000000, X, Y) [Wed May 30 21:02:34 2012] Writing source region out to fullrun_mos2_xmm0502370201_pi300-10000_pass1_cl_src2_src.reg [Wed May 30 21:02:34 2012] Extracting stamp from image fullrun_mos2_xmm0502370201_pi300-10000_cl_sm2.00.img.gz, (218, 232) - (327, 340) [Wed May 30 21:02:34 2012] XMMSAS bgd. selection expression = annulus(23646.775600, 24846.477000, 4712.661136, 9425.322271, X, Y) && !ellipse(22214.167280, 24122.585400, 428.582412, 374.122411, 50.738567, X, Y) && !ellipse(27428.275220, 27147.738400, 400.172012, 400.172012, 0.000000, X, Y) && !ellipse(24370.221283, 24327.799225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31953.348180, 27120.819000, 330.392810, 330.392810, 0.000000, X, Y) && !ellipse(32822.038000, 25854.392000, 281.880008, 281.880008, 0.000000, X, Y) && !ellipse(25381.500702, 16244.997955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25883.452620, 23147.168400, 309.473609, 309.473609, 0.000000, X, Y) && !ellipse(27165.611359, 19866.902634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32297.437836, 26131.886322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28274.064850, 26235.185547, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 30 21:02:34 2012] Writing fullrun_mos2_xmm0502370201_pi300-10000_pass1_cl_src2.gif [Wed May 30 21:02:44 2012] Mean detx,y = (3180.00, -3144.37) [Wed May 30 21:02:46 2012] Setting backscal keywords in source and bgd. spectrum [Wed May 30 21:04:03 2012] Binned source spectrum to 10 counts/bin [Wed May 30 21:04:03 2012] Setting source spectrum file to fullrun_mos2_xmm0502370201_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Wed May 30 21:04:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502370201_pi300-10000_pass1_cl_src2_bgd.pi.gz [Wed May 30 21:33:33 2012] Updating aperture counts using extracted products [Wed May 30 21:33:33 2012] Error reading totcts from fullrun_mos2_xmm0502370201_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Wed May 30 21:33:33 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 30 21:33:33 2012] Using photon index=1.80, rate=0.142, arf fullrun_mos2_xmm0502370201_pi300-10000_pass1_cl_src2.arf [Wed May 30 21:33:33 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 30 21:33:33 2012] Updating source flux to 1.4e-12 [Wed May 30 21:35:53 2012] Reading fit data from xmm0502370201/analysis//spectral/fullrun_mos2_xmm0502370201_pi300-10000_pass1_cl_src2_pl.csv [Wed May 30 21:35:53 2012] Spectral fit parameter nH value = 3.09554e+21 [Wed May 30 21:35:53 2012] Spectral fit parameter PhoIndex value = 4.23514 [Wed May 30 21:35:53 2012] Failed to get F(0.3-8.0) from xmm0502370201/analysis//spectral/fullrun_mos2_xmm0502370201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Wed May 30 21:35:53 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 30 21:35:53 2012] Using Nh = 3.1e+21, photon index=4.24, rate=0.142, arf fullrun_mos2_xmm0502370201_pi300-10000_pass1_cl_src2.arf [Wed May 30 21:35:53 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 30 21:35:53 2012] Updating source flux to 9.3e-13