[Sun Jun 9 13:07:37 2013] Detection parameters: Position = (341.6, 311.9) = 19 50 39.99 8 52 5.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 106.7 +/- 14.3 Background counts = 28.2 Rate = 0.006 +/- 0.0008 [Sun Jun 9 13:07:37 2013] Off-axis axis estimate = 3.28' [Sun Jun 9 13:10:12 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 13:10:12 2013] Initial guess for spatial extent in simple fitting = 8.07" [Sun Jun 9 13:10:12 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.901 [Sun Jun 9 13:10:12 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.07" [Sun Jun 9 13:39:28 2013] fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_src10.ximg exists [Sun Jun 9 13:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_src10.csv [Sun Jun 9 13:39:28 2013] fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_src10_1.ximg exists [Sun Jun 9 13:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_src10.csv [Sun Jun 9 13:39:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 13:39:28 2013] fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Sun Jun 9 13:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_tfrozen_src10.csv [Sun Jun 9 13:39:28 2013] fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Sun Jun 9 13:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_tfrozen_src10.csv [Sun Jun 9 13:39:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502360201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 15:05:31 2013] Source 11 is offset by 7.070225 and 6.367039 pixels which is larger than 2 X fitted extent = 0.927563 x 0.927563, not incorporating fit results [Sun Jun 9 15:05:31 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 15:05:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 15:05:31 2013] Assessing source extent using major [Sun Jun 9 15:05:31 2013] Source does appear to be extended [Sun Jun 9 15:05:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 15:05:51 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 15:05:51 2013] Initial guess for spatial extent in simple fitting = 8.07" [Sun Jun 9 15:05:51 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.901 [Sun Jun 9 15:05:51 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.07" [Sun Jun 9 15:35:53 2013] fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_src10.ximg exists [Sun Jun 9 15:35:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_src10.csv [Sun Jun 9 15:35:53 2013] fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_src10_1.ximg exists [Sun Jun 9 15:35:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_src10.csv [Sun Jun 9 15:35:53 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 15:35:53 2013] fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Sun Jun 9 15:35:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_tfrozen_src10.csv [Sun Jun 9 15:35:53 2013] fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Sun Jun 9 15:35:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_tfrozen_src10.csv [Sun Jun 9 15:35:53 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502360201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:50:31 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.046109 pixels away [Sun Jun 9 16:50:31 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 16:50:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 16:50:31 2013] Assessing source extent using major [Sun Jun 9 16:50:31 2013] Source does appear to be extended [Sun Jun 9 16:50:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 16:50:50 2013] XMMSAS src. selection expression = ellipse(29675.025574, 27090.848389, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 16:50:50 2013] Writing source region out to fullrun_pn_xmm0502360201_pi300-10000_pass1_cl_src11_src.reg [Sun Jun 9 16:50:50 2013] Extracting stamp from image fullrun_pn_xmm0502360201_pi300-10000_cl_sm2.00.img.gz, (304, 274) - (379, 349) [Sun Jun 9 16:50:50 2013] XMMSAS bgd. selection expression = annulus(29675.025574, 27090.848389, 1087.500000, 2175.000000, X, Y) && !ellipse(30796.860413, 30119.429688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27515.746000, 27147.860200, 459.171097, 459.171097, 0.000000, X, Y) [Sun Jun 9 16:50:50 2013] Writing fullrun_pn_xmm0502360201_pi300-10000_pass1_cl_src11.gif [Sun Jun 9 17:00:06 2013] Mean detx,y = (2249.50, -565.95) [Sun Jun 9 17:00:09 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 17:00:35 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 17:00:35 2013] Setting source spectrum file to fullrun_pn_xmm0502360201_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Sun Jun 9 17:00:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0502360201_pi300-10000_pass1_cl_src11_bgd.pi.gz [Sun Jun 9 17:17:14 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 9 17:17:14 2013] rmf not generated due to insufficient counts [Sun Jun 9 18:12:17 2013] Updating aperture counts using extracted products [Sun Jun 9 18:12:17 2013] Total counts from fullrun_pn_xmm0502360201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 253.00 [Sun Jun 9 18:12:18 2013] Total counts from fullrun_pn_xmm0502360201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1412.00 [Sun Jun 9 18:12:18 2013] Got source and background scale factors 1104788.000000, 8926868.000000 [Sun Jun 9 18:12:18 2013] User source parameters: Position = (341.6, 311.9) = 19 50 39.99 8 52 5.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 78.3 +/- 16.9 Background aperture counts = 174.7 Rate = 0.004 +/- 0.0008 [Sun Jun 9 18:12:18 2013] Updating counts from extracted products [Sun Jun 9 18:12:18 2013] Set source signif. to 78.25/13.22 = 5.92 [Sun Jun 9 18:12:20 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 18:12:20 2013] Using photon index=1.80, rate=0.00377, arf fullrun_pn_xmm0502360201_pi300-10000_pass1_cl_src11.arf [Sun Jun 9 18:12:20 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 18:12:20 2013] Updating source flux to 1.5e-14 [Sun Jun 9 18:12:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 18:12:36 2013] xmm0502360201/analysis//spectral/fullrun_pn_xmm0502360201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete