[Tue Feb 21 08:00:23 2012] Detection parameters:
  Position = (210.5, 164.4) = 19 51 18.14 8 41 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.1 +/- 16.9
  Background counts = 30.1
  Rate = 0.005 +/- 0.0006

[Tue Feb 21 08:00:23 2012] Off-axis axis estimate = 11.62'
[Tue Feb 21 08:02:55 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 08:02:55 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Tue Feb 21 08:02:55 2012] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.933
[Tue Feb 21 08:02:55 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 12.24"
[Tue Feb 21 08:50:44 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src31.ximg exists
[Tue Feb 21 08:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src31.csv
[Tue Feb 21 08:50:44 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Feb 21 08:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src31.csv
[Tue Feb 21 08:50:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 08:50:44 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Feb 21 08:50:44 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Feb 21 08:50:44 2012] Fit fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Feb 21 09:54:43 2012] Source 32 is offset by -4.415798 and -4.527202 pixels which is larger than
2 X fitted extent = 1.321361 x 1.321361, not incorporating fit results
[Tue Feb 21 09:54:43 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 15.856708 pixels away
[Tue Feb 21 09:54:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 09:54:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 09:54:43 2012] Assessing source extent using major
[Tue Feb 21 09:54:43 2012] Source does appear to be extended
[Tue Feb 21 09:54:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 09:55:04 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 09:55:04 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Tue Feb 21 09:55:04 2012] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.933
[Tue Feb 21 09:55:04 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 12.24"
[Tue Feb 21 10:58:30 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src28.ximg exists
[Tue Feb 21 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src28.csv
[Tue Feb 21 10:58:30 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Feb 21 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src28.csv
[Tue Feb 21 10:58:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 10:58:30 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Feb 21 10:58:30 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Feb 21 10:58:30 2012] Fit fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Feb 21 12:24:42 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 20.993225 pixels away
[Tue Feb 21 12:24:42 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 15.976622 pixels away
[Tue Feb 21 12:24:42 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 12:24:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 12:24:42 2012] Assessing source extent using major
[Tue Feb 21 12:24:42 2012] Source does appear to be extended
[Tue Feb 21 12:24:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:25:11 2012] XMMSAS src. selection expression = ellipse(18266.157593, 14254.465408, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 12:25:11 2012] Writing source region out to fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src32_src.reg
[Tue Feb 21 12:25:11 2012] Extracting stamp from image fullrun_pn_xmm0502360101_pi300-10000_cl_sm2.00.img.gz, (173, 127) - (248, 202)
[Tue Feb 21 12:25:11 2012] XMMSAS bgd. selection expression = annulus(18266.157593, 14254.465408, 1087.500000, 2175.000000, X, Y) && !ellipse(19636.952615, 15495.098137, 728.703667, 385.872348, 43.878427, X, Y) && !ellipse(16363.880000, 14807.763600, 945.798279, 945.798279, 0.000000, X, Y)
[Tue Feb 21 12:25:11 2012] Writing fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src32.gif
[Tue Feb 21 12:59:51 2012] Mean detx,y = (-6862.53, 14045.19) 
[Tue Feb 21 12:59:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 13:00:44 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 13:00:45 2012] Setting source spectrum file to fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Feb 21 13:00:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Tue Feb 21 13:53:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 13:53:00 2012] rmf not generated due to insufficient counts
[Tue Feb 21 14:51:32 2012] Updating aperture counts using extracted products
[Tue Feb 21 14:51:32 2012] Error reading totcts from fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Feb 21 14:51:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 14:51:33 2012] Using photon index=1.80, rate=0.00508, arf fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src32.arf
[Tue Feb 21 14:51:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 14:51:33 2012] Updating source flux to 5.6e-14
[Tue Feb 21 14:53:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting