[Tue Feb 21 08:00:22 2012] Detection parameters:
  Position = (353.0, 348.1) = 19 50 36.34 8 54 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1238.9 +/- 43.4
  Background counts = 37.1
  Rate = 0.04 +/- 0.001

[Tue Feb 21 08:00:23 2012] Off-axis axis estimate = 5.35'
[Tue Feb 21 08:02:55 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 08:02:55 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Tue Feb 21 08:02:55 2012] source mask rpix=2.1, npix_max = 26, mask sum = 14, frac = 0.521
[Tue Feb 21 08:02:55 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.10"
[Tue Feb 21 08:50:43 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Feb 21 08:50:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src3.csv
[Tue Feb 21 08:50:43 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Feb 21 08:50:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src3.csv
[Tue Feb 21 08:50:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 08:50:44 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 21 08:50:44 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 21 08:50:44 2012] Fit fullrun_pn_xmm0502360101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Feb 21 09:54:43 2012] Spatial fit model total counts = 1468.750000, observed total counts = 1470.000000
[Tue Feb 21 09:54:43 2012] Offset between fit and detection position for source 3 = 1.324660 pixels
[Tue Feb 21 09:54:43 2012] 1444.044000 total counts/ 600.533000 bgd. counts: snr = 34.420907
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.324660 pixels
  Position = (351.7, 348.1) = 19 50 36.73 8 54 36.2
  Extent = 5.3 (4.9-5.7)", rotation angle = 0
  Source counts = 843.5 +/- 38.0
  Background counts = 600.5
  Rate = 0.03 +/- 0.001
[Tue Feb 21 09:54:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 09:54:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 09:54:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 09:54:43 2012] Source does appear to be extended
[Tue Feb 21 09:54:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 09:55:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 09:55:04 2012] Initial guess for spatial extent in simple fitting = 5.30"
[Tue Feb 21 09:55:04 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.761
[Tue Feb 21 09:55:04 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.30"
[Tue Feb 21 10:58:30 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Feb 21 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src3.csv
[Tue Feb 21 10:58:30 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Feb 21 10:58:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src3.csv
[Tue Feb 21 10:58:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 10:58:30 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Feb 21 10:58:30 2012] fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Feb 21 10:58:30 2012] Fit fullrun_pn_xmm0502360101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Feb 21 12:24:42 2012] Spatial fit model total counts = 1468.990000, observed total counts = 1469.000000
[Tue Feb 21 12:24:42 2012] Offset between fit and detection position for source 3 = 0.055952 pixels
[Tue Feb 21 12:24:42 2012] 1445.056000 total counts/ 567.627000 bgd. counts: snr = 36.828197
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.055952 pixels
  Position = (351.6, 348.1) = 19 50 36.75 8 54 36.2
  Extent = 5.5 (5.2-6.0)", rotation angle = 0
  Source counts = 877.4 +/- 38.0
  Background counts = 567.6
  Rate = 0.03 +/- 0.001
[Tue Feb 21 12:24:42 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 12:24:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 12:24:42 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 12:24:42 2012] Source does appear to be extended
[Tue Feb 21 12:24:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:25:10 2012] XMMSAS src. selection expression = ellipse(30540.218200, 30232.061200, 332.522410, 332.522410, 0.000000, X, Y)
[Tue Feb 21 12:25:10 2012] Writing source region out to fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src3_src.reg
[Tue Feb 21 12:25:10 2012] Extracting stamp from image fullrun_pn_xmm0502360101_pi300-10000_cl_sm2.00.img.gz, (332, 329) - (371, 367)
[Tue Feb 21 12:25:10 2012] XMMSAS bgd. selection expression = annulus(30540.218200, 30232.061200, 554.204016, 1108.408032, X, Y) && !ellipse(29464.826904, 28707.886017, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 12:25:10 2012] Writing fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src3.gif
[Tue Feb 21 12:31:06 2012] Mean detx,y = (2853.65, -3482.40) 
[Tue Feb 21 12:31:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 12:31:34 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 12:31:35 2012] Setting source spectrum file to fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Feb 21 12:31:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Feb 21 14:51:31 2012] Updating aperture counts using extracted products
[Tue Feb 21 14:51:31 2012] Error reading totcts from fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Feb 21 14:51:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 14:51:32 2012] Using photon index=1.80, rate=0.0295, arf fullrun_pn_xmm0502360101_pi300-10000_pass1_cl_src3.arf
[Tue Feb 21 14:51:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 14:51:32 2012] Updating source flux to 1.5e-13