[Tue Feb 21 08:00:43 2012] Detection parameters:
  Position = (353.0, 348.0) = 19 50 36.33 8 54 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1943.0 +/- 52.5
  Background counts = 13.0
  Rate = 0.08 +/- 0.002

[Tue Feb 21 08:00:44 2012] Off-axis axis estimate = 5.34'
[Tue Feb 21 08:50:44 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 08:50:44 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Tue Feb 21 08:50:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 33, frac = 1.228
[Tue Feb 21 08:50:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.10"
[Tue Feb 21 09:14:36 2012] fullrun_mos1_xmm0502360101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 21 09:14:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502360101_pi300-10000_cl_pass0_src1.csv
[Tue Feb 21 09:14:36 2012] fullrun_mos1_xmm0502360101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 21 09:14:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502360101_pi300-10000_cl_pass0_src1.csv
[Tue Feb 21 09:14:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502360101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502360101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 09:14:36 2012] fullrun_mos1_xmm0502360101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 21 09:14:36 2012] fullrun_mos1_xmm0502360101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 21 09:14:36 2012] Fit fullrun_mos1_xmm0502360101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 21 09:54:46 2012] Spatial fit model total counts = 1883.000000, observed total counts = 1883.000000
[Tue Feb 21 09:54:46 2012] Offset between fit and detection position for source 3 = 0.331122 pixels
[Tue Feb 21 09:54:46 2012] 1868.582000 total counts/ 471.662000 bgd. counts: snr = 64.321489
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.331122 pixels
  Position = (352.8, 348.3) = 19 50 36.39 8 54 37.1
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 1396.9 +/- 43.2
  Background counts = 471.7
  Rate = 0.05 +/- 0.001
[Tue Feb 21 09:54:46 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 09:54:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 09:54:46 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 09:54:46 2012] Source does appear to be extended
[Tue Feb 21 09:54:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:58:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 10:58:30 2012] Initial guess for spatial extent in simple fitting = 5.33"
[Tue Feb 21 10:58:30 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.009
[Tue Feb 21 10:58:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Tue Feb 21 11:30:10 2012] fullrun_mos1_xmm0502360101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 21 11:30:10 2012] fullrun_mos1_xmm0502360101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 21 11:30:10 2012] Fit fullrun_mos1_xmm0502360101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Feb 21 11:30:10 2012] fullrun_mos1_xmm0502360101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 21 11:30:11 2012] fullrun_mos1_xmm0502360101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 21 11:30:11 2012] Fit fullrun_mos1_xmm0502360101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 21 12:24:47 2012] Spatial fit model total counts = 1858.970000, observed total counts = 1859.000000
[Tue Feb 21 12:24:47 2012] Offset between fit and detection position for source 3 = 0.029621 pixels
[Tue Feb 21 12:24:47 2012] 1841.204000 total counts/ 461.024000 bgd. counts: snr = 64.279718
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.029621 pixels
  Position = (352.8, 348.3) = 19 50 36.39 8 54 37.2
  Extent = 5.7 (5.4-6.0)" x 4.8 (4.5-5.0)", rotation angle = 25 (14-38) degrees
  Source counts = 1380.2 +/- 42.9
  Background counts = 461.0
  Rate = 0.05 +/- 0.001
[Tue Feb 21 12:24:47 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 12:24:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 12:24:47 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 12:24:47 2012] Source does appear to be extended
[Tue Feb 21 12:24:47 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.07
[Tue Feb 21 13:53:33 2012] Counts = 1380.180000, rescaling region sizes by 2.000000
[Tue Feb 21 13:53:33 2012] XMMSAS src. selection expression = ellipse(30644.366600, 30252.120400, 683.070020, 570.319216, 25.046375, X, Y)
[Tue Feb 21 13:53:33 2012] Writing source region out to fullrun_mos1_xmm0502360101_pi300-10000_pass1_cl_src3_src.reg
[Tue Feb 21 13:53:33 2012] Extracting stamp from image fullrun_mos1_xmm0502360101_pi300-10000_cl_sm2.00.img.gz, (314, 309) - (392, 388)
[Tue Feb 21 13:53:33 2012] XMMSAS bgd. selection expression = annulus(30644.366600, 30252.120400, 2276.900066, 4553.800131, X, Y) && !ellipse(27370.265980, 27301.747000, 434.427213, 434.427213, 0.000000, X, Y) && !ellipse(26132.254520, 30912.910400, 385.132811, 385.132811, 0.000000, X, Y) && !ellipse(29542.529720, 27287.798400, 342.177610, 342.177610, 0.000000, X, Y)
[Tue Feb 21 13:53:33 2012] Writing fullrun_mos1_xmm0502360101_pi300-10000_pass1_cl_src3.gif
[Tue Feb 21 13:53:38 2012] Mean detx,y = (3593.84, 2619.92) 
[Tue Feb 21 13:53:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 13:55:16 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 13:55:17 2012] Setting source spectrum file to fullrun_mos1_xmm0502360101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Feb 21 13:55:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502360101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Feb 21 14:51:33 2012] Updating aperture counts using extracted products
[Tue Feb 21 14:51:33 2012] Error reading totcts from fullrun_mos1_xmm0502360101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Feb 21 14:51:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 14:51:34 2012] Using photon index=1.80, rate=0.0453, arf fullrun_mos1_xmm0502360101_pi300-10000_pass1_cl_src3.arf
[Tue Feb 21 14:51:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 14:51:34 2012] Updating source flux to 6.4e-13
[Tue Feb 21 14:52:34 2012] Reading fit data from xmm0502360101/analysis//spectral/fullrun_mos1_xmm0502360101_pi300-10000_pass1_cl_src3_pl.csv
[Tue Feb 21 14:52:34 2012] Spectral fit parameter nH value = 2.04798e+21
[Tue Feb 21 14:52:34 2012] Spectral fit parameter PhoIndex value = 3.41455
[Tue Feb 21 14:52:34 2012] Failed to get F(0.3-8.0) from xmm0502360101/analysis//spectral/fullrun_mos1_xmm0502360101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Feb 21 14:52:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 14:52:34 2012] Using Nh = 2e+21, photon index=3.41, rate=0.0453, arf fullrun_mos1_xmm0502360101_pi300-10000_pass1_cl_src3.arf
[Tue Feb 21 14:52:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 14:52:34 2012] Updating source flux to 4.5e-13