[Sun Jun 17 21:25:56 2012] Detection parameters:
  Position = (303.3, 150.0) = 13 23 41.34 -41 53 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.1 +/- 12.0
  Background counts = 32.5
  Rate = 0.003 +/- 0.0006

[Sun Jun 17 21:25:56 2012] Off-axis axis estimate = 10.77'
[Sun Jun 17 21:27:45 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 21:27:45 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Sun Jun 17 21:27:45 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.016
[Sun Jun 17 21:27:45 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 11.81"
[Sun Jun 17 22:01:17 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src26.ximg exists
[Sun Jun 17 22:01:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src26.csv
[Sun Jun 17 22:01:17 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Jun 17 22:01:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src26.csv
[Sun Jun 17 22:01:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 22:01:17 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Jun 17 22:01:17 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Jun 17 22:01:17 2012] Fit fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Jun 17 22:35:43 2012] Spatial fit model total counts = 412.735000, observed total counts = 410.000000
[Sun Jun 17 22:35:43 2012] Offset between fit and detection position for source 27 = 0.195751 pixels
[Sun Jun 17 22:35:43 2012] 407.399300 total counts/ 365.597000 bgd. counts: snr = 2.186245
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.195751 pixels
  Position = (303.4, 150.2) = 13 23 41.32 -41 53 35.1
  Extent = 5.8 (3.0-10.1)", rotation angle = 0
  Source counts = 41.8 +/- 20.2
  Background counts = 365.6
  Rate = 0.002 +/- 0.001
[Sun Jun 17 22:35:43 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 22:35:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 22:35:43 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 22:35:43 2012] Source does appear to be extended
[Sun Jun 17 22:35:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 22:35:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 22:35:52 2012] Initial guess for spatial extent in simple fitting = 5.77"
[Sun Jun 17 22:35:52 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.899
[Sun Jun 17 22:35:52 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 5.77"
[Sun Jun 17 23:01:53 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jun 17 23:01:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src25.csv
[Sun Jun 17 23:01:53 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jun 17 23:01:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src25.csv
[Sun Jun 17 23:01:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 23:01:53 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jun 17 23:01:53 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jun 17 23:01:53 2012] Fit fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Jun 17 23:33:16 2012] Warning, spatial fit 25 centroid is now closest to src. 26
[Sun Jun 17 23:33:16 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 23:33:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 23:33:16 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 23:33:16 2012] Source does appear to be extended
[Sun Jun 17 23:33:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 23:33:29 2012] XMMSAS src. selection expression = ellipse(26345.165760, 13017.311600, 346.310410, 346.310410, 0.000000, X, Y)
[Sun Jun 17 23:33:29 2012] Writing source region out to fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src27_src.reg
[Sun Jun 17 23:33:29 2012] Extracting stamp from image fullrun_pn_xmm0502350101_pi300-10000_cl_sm2.00.img.gz, (283, 130) - (323, 170)
[Sun Jun 17 23:33:29 2012] XMMSAS bgd. selection expression = annulus(26345.165760, 13017.311600, 577.184017, 1154.368033, X, Y)
[Sun Jun 17 23:33:29 2012] Writing fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src27.gif
[Sun Jun 17 23:47:16 2012] Mean detx,y = (4131.00, -10355.80) 
[Sun Jun 17 23:47:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 23:47:35 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 23:47:35 2012] Setting source spectrum file to fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 17 23:47:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jun 17 23:57:50 2012] Not generating rmf since there are only 41 counts
[Sun Jun 17 23:57:50 2012] rmf not generated due to insufficient counts
[Mon Jun 18 00:22:21 2012] Updating aperture counts using extracted products
[Mon Jun 18 00:22:22 2012] Error reading totcts from fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Jun 18 00:22:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 00:22:22 2012] Using photon index=1.80, rate=0.00223, arf fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src27.arf
[Mon Jun 18 00:22:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 00:22:22 2012] Updating source flux to 1.3e-14
[Mon Jun 18 00:22:50 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting