[Sun Jun 17 21:25:56 2012] Detection parameters:
  Position = (489.1, 245.1) = 13 22 29.09 -41 46 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.5 +/- 12.1
  Background counts = 27.3
  Rate = 0.003 +/- 0.0006

[Sun Jun 17 21:25:56 2012] Off-axis axis estimate = 14.36'
[Sun Jun 17 21:27:45 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 21:27:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 17 21:27:45 2012] Initial guess for spatial extent in simple fitting = 13.61"
[Sun Jun 17 21:27:45 2012] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.216
[Sun Jun 17 21:27:45 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.61"
[Sun Jun 17 22:01:17 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 17 22:01:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src9.csv
[Sun Jun 17 22:01:17 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 17 22:01:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src9.csv
[Sun Jun 17 22:01:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 22:01:17 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 17 22:01:17 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 17 22:01:17 2012] Fit fullrun_pn_xmm0502350101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Jun 17 22:35:43 2012] Spatial fit model total counts = 404.150000, observed total counts = 389.000000
[Sun Jun 17 22:35:43 2012] Offset between fit and detection position for source 10 = 0.155292 pixels
[Sun Jun 17 22:35:43 2012] 404.777700 total counts/ 366.666000 bgd. counts: snr = 1.990320
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.155292 pixels
  Position = (489.2, 245.2) = 13 22 29.07 -41 46 40.3
  Extent = 5.4 (3.4-7.8)", rotation angle = 0
  Source counts = 38.1 +/- 20.1
  Background counts = 366.7
  Rate = 0.002 +/- 0.001
[Sun Jun 17 22:35:43 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 22:35:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 22:35:43 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 22:35:43 2012] Source does appear to be extended
[Sun Jun 17 22:35:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 22:35:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 22:35:52 2012] Initial guess for spatial extent in simple fitting = 5.44"
[Sun Jun 17 22:35:52 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.305
[Sun Jun 17 22:35:52 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.44"
[Sun Jun 17 23:01:53 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun 17 23:01:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src9.csv
[Sun Jun 17 23:01:53 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun 17 23:01:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src9.csv
[Sun Jun 17 23:01:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 23:01:53 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun 17 23:01:53 2012] fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun 17 23:01:53 2012] Fit fullrun_pn_xmm0502350101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Jun 17 23:33:16 2012] Spatial fit model total counts = 290.988000, observed total counts = 287.000000
[Sun Jun 17 23:33:16 2012] Offset between fit and detection position for source 10 = 0.017867 pixels
[Sun Jun 17 23:33:16 2012] 290.899600 total counts/ 250.343000 bgd. counts: snr = 2.563267
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.017867 pixels
  Position = (489.2, 245.2) = 13 22 29.07 -41 46 40.3
  Extent = 5.6 (3.7-8.1)", rotation angle = 0
  Source counts = 40.6 +/- 17.1
  Background counts = 250.3
  Rate = 0.002 +/- 0.0009
[Sun Jun 17 23:33:16 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 23:33:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 23:33:16 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 23:33:16 2012] Source does appear to be extended
[Sun Jun 17 23:33:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 23:33:29 2012] XMMSAS src. selection expression = ellipse(42508.035160, 21282.713800, 334.862410, 334.862410, 0.000000, X, Y)
[Sun Jun 17 23:33:29 2012] Writing source region out to fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 17 23:33:29 2012] Extracting stamp from image fullrun_pn_xmm0502350101_pi300-10000_cl_sm2.00.img.gz, (470, 226) - (508, 264)
[Sun Jun 17 23:33:29 2012] XMMSAS bgd. selection expression = annulus(42508.035160, 21282.713800, 558.104016, 1116.208032, X, Y)
[Sun Jun 17 23:33:29 2012] Writing fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src10.gif
[Sun Jun 17 23:39:50 2012] Mean detx,y = (-14036.95, -9852.13) 
[Sun Jun 17 23:39:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 23:40:03 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 23:40:04 2012] Setting source spectrum file to fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 17 23:40:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 17 23:55:39 2012] Not generating rmf since there are only 40 counts
[Sun Jun 17 23:55:39 2012] rmf not generated due to insufficient counts
[Mon Jun 18 00:22:21 2012] Updating aperture counts using extracted products
[Mon Jun 18 00:22:21 2012] Error reading totcts from fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jun 18 00:22:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 00:22:22 2012] Using photon index=1.80, rate=0.00216, arf fullrun_pn_xmm0502350101_pi300-10000_pass1_cl_src10.arf
[Mon Jun 18 00:22:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 00:22:22 2012] Updating source flux to 2.8e-14
[Mon Jun 18 00:22:50 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting